Gas Fireplace For A Country House (69 Photos): How To Install A Fireplace Without A Chimney Powered By A Gas Cylinder

Table of contents:

Gas Fireplace For A Country House (69 Photos): How To Install A Fireplace Without A Chimney Powered By A Gas Cylinder
Gas Fireplace For A Country House (69 Photos): How To Install A Fireplace Without A Chimney Powered By A Gas Cylinder

Video: Gas Fireplace For A Country House (69 Photos): How To Install A Fireplace Without A Chimney Powered By A Gas Cylinder

Video: Gas Fireplace For A Country House (69 Photos): How To Install A Fireplace Without A Chimney Powered By A Gas Cylinder
Video: 100 Best Incredible Fireplace Design Ideas 2020 2024, March
Anonim

For many centuries, the only source of heat in homes has been a wood-burning fireplace. This type of heater is quite effective, which is why it continues to be used to this day. However, the operation of such fireplaces causes a lot of inconvenience: you need to constantly harvest firewood, monitor the condition of brick chimneys, periodically clean the chimney from ash. All these inconveniences have led to the emergence of new heaters, one of which is a gas fireplace for the home. Let's try to find out what features this heat source has.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

12 pictures

Benefits

This type of heaters has a whole range of advantages. Among the main advantages are the following points:

  • safety - the design of such devices is 100% sealed, which excludes the possibility of hazardous gas entering the living space;
  • absence of soot and soot during combustion - this factor eliminates the need for constant cleaning of chimneys and internal surfaces of the fireplace itself;
  • automatic operation - to start heating, you do not need to kindle the fire yourself, because the combustion process starts after pressing one button; in addition, a special control panel allows you to adjust the intensity of the generated heat;
  • compactness - the installation itself takes up less space, and there is no need to allocate space for storing firewood;
  • versatility - such fireplaces are suitable for any houses: for a summer residence, for a country house and even for an apartment;
  • different ways of "feeding" heaters - such fireplaces can function both from the main gas pipeline and from the cylinder;
  • beautiful design - the devices are designed so that they can complement any type of interior without any problems.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Some cons

Of course, there is nothing perfect in our world. Gas fireplaces are no exception in this regard. Their main drawback is the price - such devices are expensive. Moreover, the installation of such devices is rather complicated, so the likelihood of self-installation is extremely small (for safety reasons, it is better to always use the services of professionals).

Image
Image

Another disadvantage of such products is the abundant fuel consumption. Of course, when working from a cylinder, the consumption will be controlled, but if the device is connected to the gas main, you will have to pay a decent amount for utilities.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

How are such heaters arranged?

Gas fireplaces for private houses and apartments consist of 8 components

  1. The firebox is the main element of such devices. Furnaces can be open or closed. Variations in their shape and size can be very different.
  2. The smoke collector and flue duct are parts of the structure that are responsible for the release of carbon dioxide and other harmful vapors. Modern fireplaces are built without a chimney from bricks and cement. These parts are created from special metals and coatings. They look like pipes, so they take up less space.
  3. A heat exchanger is an element that guarantees good heat transfer.
  4. The gas burner is the main functional element of these devices. It provides gas supply from the main line or from the cylinder. As a rule, it is located at the bottom of the firebox.
  5. Reflector - plays the role of a gas and fire distributor.
  6. Decorative logs (not always present) - play the role of additional decoration.
  7. Heat-resistant glass - mounted on closed models.
  8. Control unit - provides control over the operation of the heater.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

7 pictures

Principle of operation

These fireplaces function according to a simple principle. Using the control panel, the owner of the heater starts the gas supply. In parallel, a part is triggered, providing the formation of a spark. After that, the process of combustion and heating of a private house begins. The fireplace can heat the room to a certain temperature set on the control panel, or work in the so-called decorative mode.

Image
Image
Image
Image

After reaching the required temperature mark, the heating power is automatically reduced. When the temperature drops, the fireplace starts working again at the level required for the set heating of the room.

Image
Image

Turning off the device is extremely simple: by pressing a button or using a thermostat.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

What should be considered when choosing?

There are a number of recommendations to help you choose the most suitable type of gas fireplace. These recommendations relate to the type of fuel on which the heater operates, the intended purpose of the installation, and the heat output. Let's talk about all these points in more detail.

Image
Image

Type of fuel used

The fireplaces in question can operate from main gas, as well as from bottled gas. It is extremely important to take this point into account. The importance of the issue is due to the fact that some models can function only from mainstream fuel, while others - from cylinder fuel. It is strongly discouraged to give such fireplaces a "foreign" power source. This could cause damage to the device, or worse, an explosion.

Image
Image

Models operating on main gas are designated with the letter "N". Fireplaces that are powered by cylinders are marked with the letter “P”.

Image
Image

Purpose

A fireplace can be bought for two purposes: to heat the house or to decorate the interior. If the device plays a trivial role as a decorative element, you can ignore the power and type of power supply. Here, all the emphasis should be on the design and its compliance with the interior. If the heater has to fulfill its primary function - to warm up the housing - then here its power will need to be taken into account.

Image
Image

Heat power indicators

This parameter is measured in kilowatts. An accurate calculation takes place taking into account the declared power of the device and the estimated heating area. As a rule, the manufacturer or distributor indicates the area that a particular model of fireplace can heat. It should be borne in mind that manufacturers always indicate the capabilities of their creations, implying the heating of a well-insulated building. In other words, if the house is equipped with old windows that give a draft, or poorly insulated walls, the fireplace will show much less efficiency.

Image
Image

To roughly understand how much power you need a model is quite simple. 1 kilowatt of energy is spent on 10 squares of area. Multiply this figure by the area of your home, and you get the required heating power.

Image
Image

Existing types of installations

By the nature of the installation, a gas fireplace can be:

  • floor-standing - mounted on a pre-prepared base, after which it is connected to a cylinder or mains (also, a chimney is equipped);
  • wall-mounted - mounted on the wall using fasteners (most often, brackets); such models are ideal for families with small children or overly curious pets (cats, dogs);
  • built-in - such heaters require preliminary arrangement of a portal and a full-fledged chimney;
  • open - as a rule, such varieties are mounted in gazebos or in summer kitchens (often, the arrangement of a chimney is not required).
Image
Image

Among all these types, built-in models have the greatest realism and harmony. However, their installation requires special training, so you should always call qualified technicians for installation.

Image
Image

Furnace shapes

According to this indicator, the following models of fireplaces are distinguished:

  • frontal - mounted near walls;
  • angular - a place is allocated for their installation in a specific corner;
  • island - mounted in the middle of the room, which provides a full view;
  • double-sided through - they are embedded in partitions, thereby providing a view from both sides.
Image
Image

Owners of summer cottages and country houses can choose the shape of the firebox, relying only on personal preferences. Also, the choice of shape will depend on the room in which the heater is supposed to be installed. In the case of apartment residents, the approach should be more deliberate. As a rule, implementers recommend that such clients give preference to frontal or angled versions. These models are perfect for apartments, because take up less space.

Image
Image

Body material

During combustion, many chemical elements and compounds are released: carbon dioxide, sulfur. As a result, specific condensation forms inside the furnaces. This condensate has a detrimental effect on ordinary metal, causing its rapid destruction. For this reason, other types of steel are used in the production of gas fireplaces.

Image
Image

In particular, cast iron is very popular. This type of steel contains an element called graphite. Due to the presence of graphite, the walls of the furnace withstand the aggressive influence of the forming condensate.

Also, stainless steel is considered a good option for fireboxes. Even with abundant condensation, such a fireplace will last for many years. And if you periodically clean the inner surface of the firebox, you can further extend the shelf life of the heater.

Image
Image

Automation device

As standard, the gas fireplace control unit includes the following components:

  • electric ignition element - the presence of this component does not require the user to bring an open flame to the gas outlet point, thereby ensuring proper fire safety;
  • a system that controls the presence of fire - this system protects residents of the house from gas leakage if the fire suddenly goes out;
  • tipping control - stops the gas supply if the firebox changes its original position (as a rule, floor and wall models are equipped with such a system);
  • combustion control system - thanks to it, the temperature indicators of heating, set by the user, are regulated.
Image
Image
Image
Image

Some models may include climate sensors. These sensors are installed in a heated room. They record the room temperature and synchronize the received information with the fireplace automation. Thus, the power of the heater is regulated.

Image
Image

What should be considered during installation?

There are a number of rules, the observance of which will ensure the long and safe operation of heaters. These rules look like this:

  • the fireplace must be mounted on a stable surface;
  • all burning interior elements should be located as far as possible from the firebox;
  • connection of gas mains and arrangement of a chimney should be carried out only by a specialist;
  • for the arrangement of the smoke exhaust system, materials made of ceramics or stainless steel should be used;
  • an air intake system must be present, which will ensure normal combustion;
  • the room in which the fireplace is installed must be well ventilated;
  • it is necessary to embed the fireplace only in surfaces with a high bearing capacity.
Image
Image

The best manufacturers

Feedback from customers allowed us to determine the 4 best brands involved in the creation of such heaters

  1. Cheminees Philippe is a French manufacturer whose fireplaces are renowned for their reliability and high functionality.
  2. Gutbrod Keramik is a German manufacturer of gas fireplaces. For almost 150 years, this company has been putting on the market high-quality heaters with high efficiency and pleasant design.
  3. Waco & Co is a Belgian manufacturer of quality and affordable fireplaces.
  4. Element4 is a Dutch brand whose fireplaces are distinguished by a simple but extremely elegant design.
Image
Image

Possible alternative

A good substitute for the considered heaters can be fireplace stoves. They are more compact, easier to install, and affordable. The only negative is the small heating area.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

10 pictures

Recommended: