Cassette Fireplace (49 Photos): Cassette For Fireplace With Air Duct Type Primero Monoliti Tarnava

Table of contents:

Cassette Fireplace (49 Photos): Cassette For Fireplace With Air Duct Type Primero Monoliti Tarnava
Cassette Fireplace (49 Photos): Cassette For Fireplace With Air Duct Type Primero Monoliti Tarnava

Video: Cassette Fireplace (49 Photos): Cassette For Fireplace With Air Duct Type Primero Monoliti Tarnava

Отличия серверных жестких дисков от десктопных
Video: Heat design Firewarm 6kW Cassette Stove 2023, January
Anonim

A cassette-type fireplace is an indispensable device for those who value maximum comfort and aesthetic side of the issue. It is rare to find a country house without a cassette fireplace, because this product is considered the most effective means for heating with wood. It is comparatively easy to operate and not a lot of hassle to install.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

The basis of the design of a cassette fireplace is a metal shell, inside which there is a firebox (this is a cassette) made of steel or cast iron, as well as a glass door. The firebox and the casing must be separated by an air space. This is necessary so that the outer part of the device does not absorb heat from the firebox.

Image
Image

The glass door provides the highest efficiency rate - as much as ninety percent. It does not allow air to escape through the chimney. The door is equipped with small special holes, thanks to which just as much air enters in as is needed for the wood to burn.

Image
Image

Varieties

There are several types of cassettes. To select the most suitable device, you need to familiarize yourself with the differences

  • An open cassette-type fireplace has only one advantage - it quickly reaches the required temperature, but after turning it off, it will not be able to provide the room with heat for a long time. To compensate for this disadvantage, some people go to the trick and supplement the design with a brick shield. The brick will keep the heat in.
  • The closed version of the fireplace will not upset you with such a significant disadvantage. Steel with refractory ceramics is used to create the unit, therefore, even turning off the device, you will enjoy the energy emanating from it.
Image
Image
Image
Image

Cassettes differ in two more ways: for continuous operation and intermittent operation.

Image
Image

The glass door can be of different shapes - rectangular, prismatic or semicircular. The choice of the door is a matter of taste, because this characteristic has no effect on the quality of work.

Image
Image
Image
Image

Numerous benefits

How do cassette fireplaces attract every second owner of a summer cottage or country house?

  • Not only practicality is important, but also beauty. A cassette-type fireplace allows you to create a truly magnificent interior design - the design of the device looks universal, the range of available models is extremely large, so everyone has the opportunity to choose an option to their liking. Minimalism, baroque, classic and even high-tech - all these stylistic trends can be embodied with cassette fireplaces.
  • The device is available even for those who live in apartments on the top floors of high-rise buildings. This is allowed by the norms of SNIP. The cassette fireplace is safe and cannot cause a fire.
  • The cassette lends itself to facing with different materials. The use of artificial stone and wood is allowed.
  • If desired, you can give the cassette the functions of a boiler. One has only to attach a tank to it, which will play the role of a kind of battery that provides heat to the battery.
  • A big advantage is the chimney. It several times reduces the intensity of the release of combustion products.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Principle of operation

The algorithm of the cassette fireplace is simple.

Image
Image

The cassette and the air are heated by means of fire.

Image
Image

At first, the air is localized in the center of the device, and then begins to move through the channels that are attached to the outer part of the frame. This is how the heat gets into the room.

Image
Image

The number of channels can be different, it all depends on the owner's desire and the type of fireplace.If necessary, allows instant channel closure.

Image
Image

When the distribution of heat to the rooms comes to an end, the firebox fills with fresh air again. It falls into the metal box thanks to the holes located in the lower sections of the side walls of the frame.

Image
Image

How is the installation carried out

This step of installing a cassette fireplace intimidates many newbies, but it's not as difficult as it seems. You only need to carefully study the installation rules.

Image
Image

First you need to dismantle the floor covering. It is forbidden to install the fireplace on a floor covered with laminate, parquet or wood. Only a concrete base is suitable. The same procedure is carried out with an adjoining wall. The concrete floor covering needs to be thoroughly cleaned from the exfoliated cement. If there are potholes and cracks, they will have to be primed with cement mortar.

Image
Image

Next, you need to place a waterproof membrane and fill in a leveling screed, the thickness of which should not be less than fifteen millimeters.

Image
Image

The wall is covered with a heat-insulating layer, the installation of which is carried out from the bottom to the very ceiling. The recommended material is rock wool. A metal profile, dowels and screws are suitable for fixing.

Image
Image

In case you plan to connect the pipe to a pre-prepared chimney, it must be properly cleaned.

Image
Image

Installation of a pedestal

Any materials are provided for the masonry of the pedestal. The main condition is that they must be durable. The most common options are aerated concrete blocks, bricks, natural stones.

Image
Image

What does the stacking algorithm consist of?

  • Lay out the pedestal in three rows.
  • In the center, make a camera that reaches the wall.
  • The place of intersection of the chamber with the wall should be supplemented with holes necessary for the entry of cold air. The diameter of the holes is determined by the type of cassette fireplace. The parameters can be found in the technical documentation.
  • If you want the pedestal to be larger than the cassette fireplace itself, you need to decorate the protruding elements with stone slabs.
  • It remains only to apply plaster, level it and put an iron sheet.
Image
Image

Firebox cladding

Please note that the weight of a metal cassette fireplace is prohibitive - you cannot place it alone. If you don't have partners, use a simple method - put wooden blocks on a sheet of iron. This will help position and align the structure.

Image
Image
  • It is necessary to insert the heating device taking into account the fact that there was a certain distance between its rear part and the wall, indicated in the same technical documentation.
  • Walls made of brick material are installed on both sides of the cassette.
  • There should be a stone cornice on the upper section of the walls and above the glass door.
Image
Image

Chimney and duct

When the installation of the fireplace approaches the finish line, it is time to install the chimney and air duct. The pipe with thermal insulation function is placed on the chimney hole of the cassette fireplace. It is securely fixed with cuffs and a sleeve, and then it is carried out into the ceiling and through the roof. The chimney is ready!

Image
Image

It's even easier with air ducts. It is necessary to connect it to the holes located on the outer frame of the device. Each duct is led out to specific rooms.

Image
Image

Hood

The last step is to create the hood. The easiest way is to make it from plasterboard material. A frame is formed from a metal profile. The parts are connected with screws. The thermal insulation must be fixed on the inside of the frame.

Image
Image

Drywall is cut with an ordinary hacksaw. In the drywall and the insulating part, it will be necessary to cut out holes for ventilation and inspection holes. Air ducts are connected to the ventilation, then grilles are placed. Plasterboard joints are covered with putty.

Image
Image

Now all that remains is to paint the hood.

Image
Image

Primero Monoliti Tarnava

Cassette fireplaces with an air duct from the Polish company Primero Monoliti Tarnava are very popular.The company guarantees a whole ten years warranty, but in fact, fireplaces last several times longer.

Image
Image

The Primero firebox fits perfectly into a modern interior. Connoisseurs of aesthetics will certainly appreciate the attractive cassette fireplaces. For the development of models, the company uses exclusively the highest quality cast iron, and the highlight of the creation is a special technology of casting in sand molds.

Image
Image

Cassette-type fireplaces from a Polish manufacturer meet all the requirements. The devices will help you create a unique cozy home atmosphere. Even on a chilly winter day, you can enjoy the warmth.

Image
Image

Testimonials

Owners of country houses are delighted with cassette fireplaces. The reviews are overwhelmingly positive. Cassette-type fireplaces are easy to use and boast a wonderful appearance.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

7 pictures

Popular by topic