Do-it-yourself Fireplace Made Of Drywall (72 Photos): Step-by-step Instructions On How And From What To Make A Fireplace

Table of contents:

Do-it-yourself Fireplace Made Of Drywall (72 Photos): Step-by-step Instructions On How And From What To Make A Fireplace
Do-it-yourself Fireplace Made Of Drywall (72 Photos): Step-by-step Instructions On How And From What To Make A Fireplace

Video: Do-it-yourself Fireplace Made Of Drywall (72 Photos): Step-by-step Instructions On How And From What To Make A Fireplace

Отличия серверных жестких дисков от десктопных
Video: DIY ELECTRIC FIREPLACE MAKEOVER *under $900* (Stone, Mantel, & Built In Shelves) 2023, January
Anonim

Making a fireplace with your own hands is not such a difficult task. The result obtained with drywall will not leave anyone indifferent. If you try hard, then a false fireplace will not differ from a real classic fireplace.

Image
Image

The exterior of the fireplace can be decorated with special natural or artificial building materials, and inside the fireplace you can install candles that will create the feeling of a fireplace flame.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

A handmade fireplace has many advantages. It can be installed at home without coordinating this action with the relevant regulatory and supervisory authorities.

Image
Image
Image
Image

Plasterboard fireplace can be given any shape that will allow it to most interestingly fit into the decor of your room. To create such a thing, a variety of building materials that are available in specialized supermarkets can be useful.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Falshkamin - a guarantee of safety

These fireplaces are safer than their real counterparts. This can be explained by the fact that there is no real fire in them. Please note that the cost of such a thing is not high.

An additional convenience is that a decorative fireplace can be used as a home shelf, and an electric fireplace with tongues of orange flame can be placed in a prepared niche, which will also become a body.

Image
Image

If such a fireplace is not built into the wall, then it can be carried around the apartment, installing it in a convenient place every time.

Views

Depending on the design and other characteristics, imitation fireplaces can be divided into different types of fireplaces. For example, a niche can be made from drywall, where an electric fireplace or a false fireplace will be placed, which in its appearance will not differ at all from the real one. Such a fireplace may contain a biofireplace. Another type of drywall fireplace is a decorative fireplace. Visually, it will not be very similar to the classic analogue.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Also, such devices can be frontal and angled. The corner fireplace option will be a good solution if you want to install a fireplace, but, unfortunately, do not have an apartment with a large area.

Image
Image
Image
Image

Depending on the format of your apartment, plasterboard fireplaces can have very different shapes. If the room in which you want to install a fireplace is large, then the size of the fireplace can be close to the real one. Inside the structure, in this case, an electric fireplace will look advantageous. You can place it in the center of the room near the wall. With a small size of the hall, it will be convenient to use the design of a corner fireplace.

Image
Image

When installing an imitation fireplace, remember that you should not put it in hard-to-reach areas of the room, as well as near the front doors.

Image
Image
Image
Image

Design options

Before starting work with drywall, pay enough attention to the preparation of the drawing diagram, work out a detailed action plan in it step by step. After that, cut the sheets themselves or contact a specialized workshop. When the box is ready, you can decorate it as you like.

Image
Image

The only limitation in this matter will be your imagination. Why not use Styrofoam to create an imitation brick masonry, sheathing bonded sheets of putty drywall?

Image
Image
Image
Image

You can arrange the body of a plasterboard fireplace like a brick. Choosing such a design, you create the most realistic object, close to the original. You can use artificial cladding bricks. It is important to be able to make brickwork.The dummy created in this way does not need to be decorated additionally. He already has everything he needs for a chic look.

Image
Image
Image
Image

In addition, to make the plasterboard blank of the box more interesting, you can use polyurethane. In construction, it is most often useful as a means for creating decorative accessories that diversify the look of the fireplace. Attach such details to the main structure and diversify its exterior.

Image
Image

Inside such a structure, to complete the picture, create an imitation of a hearth. A good option is to install a mirror instead of the back wall. When using candles in the fireplace insert, the mirror will give an unusual visual effect - creating the depth of an imitation fire.

Image
Image
Image
Image

When building a product from drywall, remember that it is he who is most convenient for the purpose of building a fake fireplace and is regularly used by craftsmen. The use of drywall at the final stage of construction will allow you to design the fireplace body in a completely different style.

The plaster frame in the form of exquisite decorative details will look interesting. The cost of such drywall is not great, and the ability to create products of various shapes from it makes it a more attractive material for building a fireplace and more convenient for decoration.

Image
Image
Image
Image

In addition to the fact that the material is universal, its plus is that over time you will be able to change its external design without disassembling the case itself. So it will be possible to radically change your fireplace and you do not have to rebuild it. Let's take a closer look at how to make a fireplace with your own hands using the example of a drywall product.

Image
Image

How to do it yourself?

We bring to your attention step-by-step instructions for making a fireplace. Let's now take a closer look at how to create a fake fireplace at home. Attach the support frame to the wall with dowels, and assemble the frame using self-tapping screws, place the rack profile on the guide.

Image
Image
Image
Image

In the next step, using the level tool, check the flatness of the planes. Make sure they are level with a clear vertical and horizontal alignment.

Image
Image
Image
Image

Use a measuring tape to check if the shape of the pads is rectangular. The sites must be the same. Measure the length of the diagonals of one of them.

Image
Image
Image
Image

If, when designing an imitation fireplace, you want to make non-straight planes, then cut the metal profiles at an equal distance and raise them so that they can give the desired configuration to your product.

Image
Image
Image
Image

We cover with plasterboard

When this stage is completed, it's time to think about plastering the created metal base with drywall.

Image
Image
Image
Image

Cover the crossbar and sides with plasterboard sheets on both sides of the frame. When fastening, use self-tapping screws with a hidden top for fixing approximately every 13-14 centimeters.

Image
Image
Image
Image

Connect the drywall planes with silicone. Give the resulting object the necessary shape so that it can become a pedestal for installing your fake fireplace.

Image
Image
Image
Image

Using the same technology, as we described earlier, create a shelf that will be placed above your product. Using self-tapping screws, silicone or sealant, connect this shelf and the previously created pedestal to the body of your imitation fireplace.

Image
Image
Image
Image

Putty product

The next step will be to putty the product. Close the joints of drywall sheets, and also make sure that no traces of self-tapping screws fastening the structure are visible. Further, we advise you to apply the putty to the entire surface of the false fireplace.

Image
Image
Image
Image

Finishing: creating a work of art

You can use a variety of techniques to give your fake fireplace a more dramatic look. For a fireplace, decorative elements created from plaster, as well as other various objects, can be used.With an original approach, these steps will help you make a real work of art out of an imitation fireplace.

Use the so-called water-based emulsion to decorate the fireplace with discreet pastel colors. When choosing a method of decorative and color design, take into account the features of the room interior of the room, its furnishings and style.

Image
Image
Image
Image

Interior or electric?

Now let's take a look: what solutions and designs are applicable inside the enclosure box? Why not put an electric fireplace, and also use a variety of techniques to give the portal more expressiveness and originality?

For these purposes, you can pick up the ceramic tiles you like, stones created from artificial material or real small cobblestones brought from the river coast. Take, for example, brick or marble, or wood that is traditionally used in interiors.

Image
Image
Image
Image

When choosing a cladding for the appearance of a fireplace, remember that the product consists of drywall, so you should not load it too much. When decorating a fireplace, do not forget about blacksmith metal elements created using the art forging technique.

If you decide to add a zest to the appearance of the fireplace with the help of a stone or tile, then here you will be helped by a special glue designed to fix ceramic tiles or liquid nails, which can also effectively cope with this task.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Electric fireplace

Let's take a look at how to install an electric fireplace in a false fireplace you created from drywall. The wall where the electric fireplace will be located must be sheathed with heat-resistant materials.

On the floor, install a special podium for an imitation fireplace and a metal frame, the base of which must be reliable enough to withstand the stress that an electric fireplace will give it. For this reason, attach the profiles at the base every 200 millimeters.

Image
Image

Run electricity inside the structure so that it can power your electric fireplace. On the plasterboard body, make several holes that will become a kind of hood.

Cover the portal body with plasterboard sheets and reinforce it with special building corners. Apply putty on the resulting object and decorate the fireplace as you see fit. At the final stage, place an electric fireplace in the finished structure.

Image
Image

Where to put it?

When choosing a place for a fireplace, focus on the design of your room. Visualize how the fireplace should fit into your living space and give it a unique twist. One of the options would be to install a fireplace in the middle, against the wall.

Install it so that it does not interfere with movement around the room and does not block its space, without visually taking away the room area. Also consider the proximity of the source of electricity - in the event that you decide to install an electric fireplace in the frame.

Image
Image
Image
Image

If the room in which you want to put an imitation stove is not large in size, then it's time to think about installing an angular fireplace. Since in small dwellings, the corner is usually a place not occupied by anything.

We sincerely hope that our article will help you choose the best option for a drywall fireplace that is right for your home. And the diagrams and tips given in it will allow you to easily create a product with your own hands.

Popular by topic