Fireplace Decoration With Tiles (30 Photos): Clinker, Fireclay, Ceramic Tiles For Stoves

Table of contents:

Fireplace Decoration With Tiles (30 Photos): Clinker, Fireclay, Ceramic Tiles For Stoves
Fireplace Decoration With Tiles (30 Photos): Clinker, Fireclay, Ceramic Tiles For Stoves

Video: Fireplace Decoration With Tiles (30 Photos): Clinker, Fireclay, Ceramic Tiles For Stoves

Отличия серверных жестких дисков от десктопных
Video: Ceramic Tile Fireplace Designs & Patterns 2023, January
Anonim

Tiling a fireplace is one of the simplest and cheapest ways to design a fireplace. Such a coating does not require special care, but the selection of material must be approached very carefully.

Image
Image
Image
Image

How to choose the right material

Any tile that can be used to cover the stove is suitable for finishing the fireplace. When choosing a tile, parameters such as are important:

  • Heat capacity. Tiles promote heat retention
  • Heat resistance. Facing the fireplace is possible only with the type of tile that has increased resistance to high temperatures.
  • The tiles must be durable. Its strength factor must be at least 30 tons / sq. M.
  • The material must be environmentally friendly. In this case, when heated, fewer harmful chemicals will be released into the air, which is important in a residential area.
Image
Image

Careful inspection is important when choosing a tile. The tile should be flat, both outside (which will provide an aesthetic appearance) and inside. If the tile is uneven from the inside, then during laying it may lie poorly on the brick, which will lead to laying defects.

Image
Image

Cracks on the tiles indicate that the material is brittle and, under the influence of high temperatures, will most likely burst, even if there are cracks only on the seamy side.

It is recommended to buy 10-15% more material than necessary. This excess will be used to cut the tiles for convex parts and for possible replacement during use.

Image
Image

It is not recommended to use tiles for decoration. It is not designed for high temperature service.

Image
Image

The tile does not require special maintenance, it is easy to remove dust, soot and other contaminants from it. Large tiles are easier to lay than small tiles, but harder to fit over ledges and niches.

Image
Image

The variety of types of finishing tiles allows you to choose options for every taste.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Cladding types

  • Terracotta tiles. These tiles are highly durable and have proven themselves over the years. Differs in a specific reddish tint, the so-called terracotta.
  • Majolica - the same terracotta tiles, but covered with glaze. It is beautifully and variedly painted.
  • Clinker tiles. It is an alternative to finishing bricks. A wide variety of colors of this material allows it to fit into any interior.
  • Porcelain stoneware. This material is good primarily because it imitates a variety of materials such as granite, marble or terracotta.
  • Fireclay tiles (e.g. Feldhaus Klinker). Its most important feature is piece production, not mass production. This approach allows you to use fireclay tiles in any interior. And also in the decoration of stoves and fireplaces of all shapes and sizes.
  • Tiles are one of the most beautiful types of finishes. The main feature that distinguishes tiles from ordinary ceramic tiles is the presence of a rump, which helps to fix the tiles and improves heat conservation.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Styling tips

Laying ceramic tiles does not require any special tools. An ordinary grinder is suitable for cutting elements of the desired size. It is worth using tiles with a thickness of no more than 8 mm.

Image
Image

Fireplace preparation and cladding are performed as follows:

  1. Remove old finishes, if any, along with plaster and paint. Clean and deepen the joints between the bricks, moisten the surface with water.
  2. Smooth the brick surface with heat-resistant mastic or clay mortar. Wait for the material to dry. If the surface is very uneven, level it with a grinding wheel.The better the surface is leveled, the easier it is to lay the tiles.
  3. Apply a primer. It helps to reduce dust and helps the previous layer dry evenly. Leave the primer to dry for two hours.
  4. The glue is mixed according to the instructions using a mixer or drill with the desired attachment. Glue for temperatures above 500 degrees in living quarters is not needed, the surface of the fireplace does not warm up to this level. A large number of solutions provided by current manufacturers will make it easy to choose the right material.
  5. The tiles are laid out from the bottom, applying the glue with a notched trowel. So that there is the same distance between the tiles, special corners are used. Every few rows we check the masonry with a level vertically and horizontally.
  6. After the completion of the masonry, jointing is performed. If desired, the seams can be convex or depressed, which is achieved by applying a solution with a special curly element.
  7. The tiles dry for two days at room temperature. After this period, the fireplace can be heated.
Image
Image

Interior design

Decorating fireplaces with decorative tiles is a great idea for decorating a fireplace in such a way that it fits into the interior as well as possible. The tile is suitable for all types of fireplaces: corner, semicircular, closed and others.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

8 pictures

Popular by topic