DIY Folding Chair: How To Make A Folding Chair With A Plywood Back, Homemade Models From Pipes And Metal

Table of contents:

DIY Folding Chair: How To Make A Folding Chair With A Plywood Back, Homemade Models From Pipes And Metal
DIY Folding Chair: How To Make A Folding Chair With A Plywood Back, Homemade Models From Pipes And Metal

Video: DIY Folding Chair: How To Make A Folding Chair With A Plywood Back, Homemade Models From Pipes And Metal

Video: DIY Folding Chair: How To Make A Folding Chair With A Plywood Back, Homemade Models From Pipes And Metal
Video: How to Make a Secret Foldable Chair at Home 2024, March
Anonim

The chair is one of the most essential household items. It is equally necessary both at home in the kitchen and in the country or in the backyard of the house. And no fishing, hunting or picnic is complete without a folding chair. This simple piece of furniture can be bought without any problems in any furniture store, but it will be much more pleasant to do it yourself.

Image
Image

Features of the

This chair model is chosen by travelers, summer residents and artists. The practicality and compactness of this model does not require proof. Today, there are folding camping options for almost all the pieces of furniture we are used to: tables, stools, folding beds, sun loungers and the like. The main advantage of such products is, of course, compactness and mobility.

Covering several tens of kilometers a day, it is pleasant for a tourist to land on a folding chair during a halt. When you travel by car, it is important to have a compact chair, and if you are already moving on your feet, then this becomes a necessity. Oversized camping items are not suitable. Products with a back will be especially comfortable.

Image
Image
Image
Image

However, do not think that all folding chairs are a cheap and awkward sight, which is suitable only for going to the forest, fiddling in the garage, or at best, for country gatherings. Today you can buy or make yourself very stylish and cozy chairs for a modern kitchen interior. It is not a shame to show such products to guests, especially if the pride is made by hand.

Everyone can assemble a homemade highchair, the main thing is to follow the instructions and the drawing.

Image
Image
Image
Image

No special carpentry skills are required for this venture. You just need to know how to handle a hacksaw and hold a drill in your hands. The folding chair is assembled according to the drawing, like a designer.

There are three main materials used to make folding chairs: metal, wood and plastic. Plastic is a lightweight and cheap material, easy to clean. It is not able to withstand a large body weight and deforms if it is near heating devices. This material is short-lived, so for constant use it is better to choose something more durable. For example, chairs on a metal frame.

Folding models made of aluminum are reliable and sturdy. They are not afraid of rust and withstand a lot of weight. The best option is wooden products. They are safe, beautiful and reliable. Such a chair will cost more, but it will also serve for a long time. In addition, even a beginner will be able to assemble himself a folding travel chair from this material.

Image
Image
Image
Image
Image
Image

Backless

The design of the folding chair vaguely resembles an easel-clapper due to the rising seat. The main parts are bars connected by hinges, which allow one part to move relative to others.

When assembled, the frames fit exactly one with the other. The chair is ready for use when the frames are open and the seat is raised. The seat is supported by self-tapping screws mounted in the front frame.

Image
Image

To restore the seat to its original state, you need to raise it by closing the frames and at the same time lowering the seat. When folded, this item can easily be hidden under a sofa, behind a wardrobe, or simply leaning against the wall.

Before proceeding with the assembly, position the bolts on the legs so that the axle rests on the top of it. Otherwise, the chair will come out tall and unstable. The tops of the nuts and bolts are slightly "drowned".

Image
Image
Image
Image

Tools and materials

When deciding to make a hand-made chair without a back, take care of the availability of certain tools. Most of them are in everyone's garage or on the balcony, and if something was not found, then it can be easily purchased in a hardware store. Below is a list of the required tools:

  • Jigsaw and saws to it;
  • Manual milling machine;
  • Screwdriver;
  • Grinding machine;
Image
Image
Image
Image
Image
Image
Image
Image
  • Roulette;
  • Clamps;
  • Pencil, eraser;
  • Building corner.
Image
Image
Image
Image
Image
Image
Image
Image

To make a chair, you need not only working tools, but also good materials. The store has everything you need, namely:

  • Bars of wood;
  • Shkantiki;
  • Furniture board;
  • Self-tapping screws;
  • Glue;
  • Screws, bolts, nuts;
  • Metal bar.
Image
Image
Image
Image
Image
Image
Image
Image

Pine boards are suitable for making chairs, because they are very light, but it is better to use ash, since this material is harder. Pine parts are less durable. The optimal board width is 21 mm. Birch is also a very good material.

In principle, you can use any kind of wood that you have. You can also come up with an interesting product made of plywood.

Image
Image
Image
Image

Frame and fastening of bars

At this stage of work, the upper ends of the legs are connected to the crossbars with bolts, on which the seat will later be. Two crossbars are mounted to the inner legs, and two to the outer ones.

As a result, we have two parts on the hinges. They are first connected by external seating bars. We make a stock of 1.5-2 cm. The bars are attached to the sides of the crossbar: one to the outside, the other to the inside. We make small crossbars between the legs, the so-called proges.

Image
Image
Image
Image

The next important step is fixing the bars. The middle beams will determine how the chair folds and unfolds. The middle bars are placed in the same way as the wide outer ones. We attach one bar to the inner, and the second to the outer rungs.

The height of the chair depends on the attachment points of the internal beams. The approximate distance is 1.5-2 cm. The height of the chair is usually 35-45 cm, but this is determined individually.

For information on how to make a folding chair without a back, see below.

Painting

First you need to decide on the material for painting. Acrylic and alkyd paints are suitable for such work. It is better to use acrylic paints anyway, as they are more durable. In addition, they do not have a harsh unpleasant odor. Acrylic perfectly protects wood from damage and the negative effects of moisture. You will also need several brushes of different sizes. Work begins with the preparation of the product: checking the reliability of fasteners, grinding and cleaning.

If you like natural wood patterns, then get a translucent furniture varnish. It does not wear off and perfectly protects the wood. The lacquered surface is easy to clean.

Image
Image
Image
Image

The easiest option would be to buy spray paint in a spray can. Its cost, of course, will be higher, but it is easier and more convenient to work with it.

If the surface has defects, they can be corrected with a special putty. In this case, it is better to paint the product so that the "patches" are not noticeable. It is better not to close up significant chips and cracks with such a composition - they may fall off.

Image
Image
Image
Image

With fabric seat

The advantage of these chairs is that they are extremely easy to manufacture and even more compact. Even a set of such chairs can be easily hidden under the bed, and one can even hang in the garage on a carnation. For the manufacture of such a model, a drawing is not needed, but from the materials you will need:

  • A piece of leather or dense fabric such as jeans;
  • Self-tapping screws;
  • Cuttings from garden tools or metal pipes;
  • Washers and nuts with screws.
Image
Image
Image
Image
Image
Image
Image
Image

Instead of wooden cuttings, you can use polypropylene pipes. Prepare from the tools:

  • Grinding machine;
  • Jigsaw;
  • Knife or scissors;
  • File;
  • Screwdriver;
  • Wrench;
  • Screwdriver;
  • Drill.
Image
Image
Image
Image

Cut off 3 future legs from the selected material 60 cm long with a section of 4 cm. Then we make holes 0.6 cm on each handle at a distance of 34 cm from the edge. At the ends we drill a hole to fix the seat. If you chose wooden legs, saturate them with linseed oil and paint. This way they will last longer.

The seat will have a triangular shape with a length of 28 cm on each side. We cut the fabric with scissors, and if the seat is planned from leather, then we cut it with a knife. For ease of carrying, you can equip the chair with a belt. The chair can be carried over the shoulder by attaching a strap to it. A loop for fastening it is made at one of the corners of the canvas.

Image
Image
Image
Image
Image
Image

After the legs are dry, we proceed to the assembly. A screw 6 mm and a length of 100 mm is passed through the first leg, having previously put a washer on the screw. Put on the second washer, put the screw on the hairpin with the loop and install the third washer. We put on one more leg, put on a washer with a nut. The third leg is put on a hairpin with a loop, then a washer with a nut is installed. The fasteners are tightened with a wrench and a screwdriver. We remove the excess thread with a grinder, and go through the cuts on the pins with a file.

It's time to attach the seat. Before tightening the screws, put large washers under the caps. If you cut a self-tapping screw with a loop into one of the legs, you can attach a belt to it. The work is completed by installing metal or plastic caps on the legs, which will serve as protection against damage.

Recommended: