How To Remove A Door From Its Hinges: Dismantling A Metal Entrance Model, How To Remove A Trim, How To Disassemble A Plastic Balcony Door, How To Install It Back

Table of contents:

How To Remove A Door From Its Hinges: Dismantling A Metal Entrance Model, How To Remove A Trim, How To Disassemble A Plastic Balcony Door, How To Install It Back
How To Remove A Door From Its Hinges: Dismantling A Metal Entrance Model, How To Remove A Trim, How To Disassemble A Plastic Balcony Door, How To Install It Back

Video: How To Remove A Door From Its Hinges: Dismantling A Metal Entrance Model, How To Remove A Trim, How To Disassemble A Plastic Balcony Door, How To Install It Back

Video: How To Remove A Door From Its Hinges: Dismantling A Metal Entrance Model, How To Remove A Trim, How To Disassemble A Plastic Balcony Door, How To Install It Back
Video: How To Remove Sliding Patio Doors 2024, March
Anonim

Doors are an essential attribute of every home, which gives it practicality and originality. But the door leaf is not durable and loses its decorative and practical characteristics over time. Such structures need repair or replacement. This process begins with dismantling the product. Before removing the door from the hinges, you should carefully familiarize yourself with its design.

What is dismantling

Dismantling the door is a procedure that involves the complete removal of the door leaf from the place of its attachment. Often, this concept is understood as a recess from the doorway not only of the door leaf, but also of the support frame. Dismantling doors in an apartment can be broken down into several sequential steps:

  1. Dismantling the canvas. This step is important if the structure is very heavy and cannot be removed with the box. To remove the canvas from the hinges, several approaches are used, which depend on the type of support elements.
  2. Dismantling the box. This process involves removing the fasteners with which the structure is attached to the wall. Often these are anchors or special screws. When they are unscrewed, the filler between the box and the wall (polyurethane foam, etc.) is removed and the product is pulled out.
Image
Image

Note that old doors are simply broken down with crowbars. This method of dismantling can disrupt the structure of the slopes. In this case, you have to carry out a completely new surface finish.

Types of structures

Doors are a very popular product today. This has led to the emergence of a very wide variety of these designs. Depending on the method of opening, door leaves can be divided into several types:

  • Swing. This type of mechanism is one of the most common. The canvas is fastened on special hinges, which allows it to be opened in one direction.
  • Sliding. This type of door presupposes the presence of small runners along which the sashes move parallel to the walls. Perfect for small spaces, as they do not take up much space. Installation is carried out using special roller mechanisms.
Image
Image
Image
Image
  • Foldable. The canvas of this design consists of several blocks that can be folded into a small canvas. Folding doors allow you to create a unique interior. Very often they are used in modern interiors, for the purpose of high-quality and simple zoning of space.
  • Swinging. Doors of this type resemble swing doors, but the sash can move in two directions. You can meet similar products at the entrance to large office centers or in hospitals, where you need to constantly open them without thinking about the direction.
  • Carousel. The revolving door is a round leaf with several leaves. To enter inside, they need to be rotated around the central axis. You can meet such structures at the entrance to shopping centers, but there they are set in motion automatically.
Image
Image
Image
Image
Image
Image

Another of the classifications of doors is the type of material used to make them:

  1. Wooden. Wooden doors are installed mainly inside the house, as they are susceptible to moisture and lose their decorative qualities. Outwardly, they can have both smooth and paneled structure.
  2. Metallic. Metal products perfectly tolerate temperature extremes, and are also durable. Therefore, almost all entrances to buildings or apartments are equipped with them.
  3. Plastic. In the production of these products, special sandwich panels are used to obtain high-quality insulation of the canvas. Plastic doors are practical and are not afraid of moisture and other external factors.
Image
Image
Image
Image
Image
Image

Features of the procedure

The door leaves are fixed to the frame using various types of hinges. These designs can be both external and hidden. This allows not only to complicate or simplify the removal procedure, but also to provide an optimal level of security.

Image
Image
Image
Image

Before starting such an operation, you should study the design features of a particular type of door. This will allow not only correctly, but also quickly dismantle the canvas from the hidden hinges.

How to dismantle a plastic balcony door?

Plastic doors are versatile designs that can be installed not only on a balcony or loggia, but also as interior doors. Technically, all these products are identical and differ only in shape and decoration. Dismantling of PVC sheets is often done in order to replace glass or install a new structure. To remove the door from the hinges, you must perform several sequential operations:

  • To gain access to the awnings, cover the canvas, but do not close it with a handle. Each hinge is hidden under a decorative cover that must be removed by hand or with a screwdriver.
  • After that, they begin to release the loops. The procedure is started from the top element. Each such design contains a special metal pin. It often protrudes slightly from above the hinge, in order to remove it, you should press on it from above with a screwdriver or something else. When the rod protrudes slightly from below, grab it with pliers and carefully pull it out.
Image
Image
Image
Image
  • Then, in a similar way, the pins are removed from all other loops. At the same time, it is important to hold the structure in order to damage the glass unit in case of an accidental fall.
  • To remove the door, you need to tilt it slightly towards yourself. Several people must carry out these operations, since the product is quite heavy. When you tilt the canvas, you should gently lift it to release it from the support located below.

How to dismantle interior doors?

Interior doors are often only an element of the interior and do not carry the task of ensuring the safety of the house. Therefore, they are made from wood and its derivatives (MDF, etc.).

Image
Image

The algorithm for removing a wooden canvas from depends primarily on the hinges that are used to fix them. If card or mortise removable modifications are installed on the doors, then this process is pretty easy:

  1. Initially, the door must be opened in such a way that the side of the hinges does not rest against the upper end of the box.
  2. After that, using a small crowbar or physical strength, you should raise the canvas. This must be done until the hinges come out of the support pins. A similar operation should be carried out together, since the product may be heavy and cannot be held by oneself.
Image
Image

Sometimes fixed card hinges are installed on MDF doors. It is theoretically impossible to remove the canvas from them. To dismantle the veneered structure, unscrew the fasteners that fix the hinges on one side. Thus, you unscrew the system itself, which later will need to be screwed on during installation.

Screwed-in hinges in many ways resemble mortise loops, but at the same time fixation is performed using self-tapping fasteners that are attached to the product frame. There are several types of such mechanisms. The simplest ones are removable, and the door is dismantled from them according to the previously described algorithm.

Image
Image
Image
Image

How to remove the entrance?

Entrance doors must meet high security standards. Therefore, it is important to monitor the condition of this structure. Often, all types of such doors are metal, since the material is highly durable and durable.

Several types of hinges can also be used on steel sheets. We have already discussed how to dismantle the simplest mechanisms in the previous section. Let us now dwell on more complex options.

To ensure high security, hidden hinges are installed on the entrance iron doors. This reduces the likelihood of quick removal, as with older blades with removable structures.

Image
Image
Image
Image

Removing vestibule doors from such mechanisms is one of the most difficult procedures. This process consists of several sequential steps:

  1. First of all, you need to access the loop itself. This can be done only from the end of the door leaf. Therefore, you need to open it to a certain angle so that it is convenient to work.
  2. To remove the canvas for insulation, you should dismantle the fasteners that fix the loop to the frame of the box. This can be done with a screwdriver or hexagon. Before starting this operation, you should familiarize yourself with the technical features of this mechanism. If you unscrew the wrong bolts, it can damage the entire system.
Image
Image

How to remove the cladding?

One of the ways to decorate doors is to attach additional materials to them. When dismantling the door leaf, you need to disassemble it completely in order to gain access to the internal elements. This is quite simple to do and it is done in a few steps:

  1. Initially, the door is removed from the hinges and placed on a horizontal surface. It is advisable to use several stools to raise the canvas to a certain height. So it will be more convenient to work with him.
  2. After that, the decorative skin or MDF panels are removed. For fabric finishing, use a screwdriver or screwdriver to remove any decorative screws. In the case of MDF, you also need to dismantle the fasteners, but at the same time the sheet itself can be additionally attached to silicone, therefore, to cut it off, you can use a thin line.
  3. If you do not need the panel, you can simply break off pieces of the decorative overlay. Please note that some modifications may have a protective film that must also be removed.
  4. When we got to the door frame, you need to unscrew the upper metal plate. It is fastened with several self-tapping screws. After that, you can easily remove the casing and carry out the work you need.
Image
Image

Please note that removable frames and decorative trims are often found only on metal doors. Wood structures do not need decoration, as they are initially distinguished by a unique design.

How to install back?

Dismantling the door leaf involves repairing or replacing it with new structures. The installation of such elements is quite simple and can be done by hand.

Image
Image
Image
Image

The technology for hanging the canvas depends primarily on the type of hinges used:

  • Removable mechanisms. Installing a door on such hinges is the easiest. To do this, they are attached to the product and the box. After that, the canvas is simply put on with loops on the support pins. It is important to perform this operation with two people, which will allow you to control the direction of each element separately.
  • Balcony doors are often equipped with hinges, which are fixed with small pins. To install them, you should place the canvas in the grooves on the box and sequentially insert the corkscrew element into them. It is important that all the segments match, otherwise you will not be able to install all the other pins in order.
  • Hidden hinges … The canopy of doors on these structures is difficult, since it requires a high-quality combination of all elements. If you are planning to mount hinges from scratch, then this is very difficult. You can do this with your own hands only for wooden canvases. When you simply removed the product from the hinges, you can put it back on simply by screwing it to the frame of the mechanism.
Image
Image
Image
Image
Image
Image
Image
Image

It is important, after installation, to align the plane of the door so that there is no distortion. This can be done with the same fasteners that allow you to move the element in a certain direction.

Dismantling doors is a simple operation requiring only care and accuracy. To cope with this task quickly and efficiently, it is advisable to first study the design features of the hinges. If you are not sure that you can cope with this on your own, then it is better to entrust this to an experienced specialist.

For information on how to properly remove the interior door, see the next video.

Recommended: