Sheathing Of MDF Doors: Finishing And Upholstery With Panels From The Inside, How To Properly Finish And Sheathe, Do-it-yourself Cladding

Table of contents:

Sheathing Of MDF Doors: Finishing And Upholstery With Panels From The Inside, How To Properly Finish And Sheathe, Do-it-yourself Cladding
Sheathing Of MDF Doors: Finishing And Upholstery With Panels From The Inside, How To Properly Finish And Sheathe, Do-it-yourself Cladding

Video: Sheathing Of MDF Doors: Finishing And Upholstery With Panels From The Inside, How To Properly Finish And Sheathe, Do-it-yourself Cladding

Video: Sheathing Of MDF Doors: Finishing And Upholstery With Panels From The Inside, How To Properly Finish And Sheathe, Do-it-yourself Cladding
Video: How to Seal and Paint MDF Edges - Video #2 2024, March
Anonim

The door leaf today acts not only as a protection, but also as a decorative element in the room. But many metal models do not differ in exquisite design, since manufacturers are guided by the parameters of burglary resistance and strength. Today there is a way to solve this problem by covering the canvas with MDF panels. With the help of this material, you can radically change the design of the product and improve its technical parameters.

Image
Image

Panel types

MDF panels are thin boards made from fine wood chips. Pressing and a little special glue are used to connect them. But in order to give the products unique characteristics, they are covered with protective materials. Depending on this, there are several types of panels for door decoration:

Veneered. The product is covered on the outside with a thin layer of natural wood. This allows you to give it a unique design

The veneer is very beautiful and resists various damage quite well. But wood is very easy to scratch with sharp objects, and when exposed to high humidity, it can swell.

Image
Image
  • Laminated. A special film is applied to the panel cladding, which takes almost any shape. With the help of this substance, you can get high-quality and durable doors.
  • Anti-vandal. The surface of the material is covered with special plastic in several layers. This design is very resistant to ultraviolet light, and also has high strength rates.
Image
Image
Image
Image

Benefits

MDF panels have appeared on the market relatively recently, but have already gained immense popularity. Many manufacturers equip their doors with them at the production stage. Products of this type have several significant advantages:

  1. Durability. This is ensured by special protective layers that give the product high strength.
  2. UV and water resistant. The linings only swell with constant use in very damp rooms.
  3. Low cost. This is achieved through the use of natural and available materials, which are primary production waste.
  4. Environmental friendliness. The linings are absolutely safe for human health, as they contain only natural substances in their structure. At the same time, the finished product does not emit harmful components (phenol, resins, etc.) into the air.
Image
Image

How to do it yourself?

Paneling is a fairly simple process that is easy to do with your own hands. But in order to get a quality result, you should stock up on some tools:

  • Self-tapping screws. Please note that their length should not exceed the thickness of the door. This will exclude damage to the inner or outer side of the web during sheathing.
  • Screwdriver and attachments for screwing in fasteners.
Image
Image
Image
Image
  • Hammer.
  • Jigsaw. It will make it easier to cut holes for locks and other fittings.
Image
Image
Image
Image

You will also need the MDF panels themselves. You can buy them in almost any specialty store. It is important to match their style to the design features of your home.

Please note that after installing the cover plate, the thickness of the door leaf will increase. In some cases, it will simply be impossible to install old locks on them, so you will have to buy new models adapted to these parameters.

Image
Image

You can trim the door leaf with panels both from the inside and outside. It all depends on personal preference. This procedure begins with the following preparatory operations:

  1. First of all, the door is dismantled from the hinges. This is necessary in order to simplify further work and eliminate possible distortions.
  2. After that, the hinged hinges are removed from the canvas (if they are not internal), and all the fittings are also dismantled. The canvas must remain completely clean so that nothing interferes with the attachment of the pads.
  3. At this stage, the doors should be thoroughly cleaned of dirt. If these are metal products, then they are wiped with grease-removing compounds.

Some experts recommend applying protective paints to prevent the development of corrosion before sheathing them, but if the door is made of wood, its surface should be carefully sanded and cleaned.

To improve adhesion, you can glue a special vinyl film around the entire perimeter.

Image
Image
Image
Image

The algorithm for installing the MDF panel is quite simple and consists of the following sequential actions:

  • Before attachment, the panel is thoroughly wiped to remove dirt. If this is not done, the debris remaining inside can lead to the sheet simply peeling off.
  • At this stage, you should lay the panel on the door leaf and mark on it the location of the holes for the previously dismantled fittings. After that, the product is removed, and special adhesive solutions are applied to the door surface.

Experts recommend spreading the mixture in waves around the entire perimeter. It is important not to forget to grease all the edges with glue.

Image
Image
Image
Image

When the mixture is applied, an overlay is laid on the door leaf and leveled. It is important to press it well so that it lies flat.

Clamps can be used to fix its position. This will not only facilitate the implementation of fasteners, but also eliminate accidental shifts and distortions.

Image
Image

The process ends with additional fixation of the structure using self-tapping screws. For this, holes are pre-drilled under them.

Please note that they do not have to be pass-through. Therefore, it is best to mark the depth of the hole on the drill.

Often, fasteners are placed only along the perimeter of the door leaf at a distance of at least 10 cm. After that, self-tapping screws are screwed into the panel. So that they do not stick out, their heads are hidden in the lining itself. To do this, a small countersunk groove should be formed when drilling. Top fasteners are closed with decorative overlays. When the fastening of the cover is completed, holes are cut out in it for the fittings and the handles and locks are installed.

Image
Image

Installation of MDF sheets is carried out according to the same algorithm, regardless of the side of the door. It is important to follow the manufacturer's recommendations and the measurement accuracy. Sometimes moldings are used as fasteners, which looks like a decorative strip. They not only securely fix the structure, but also decorate the door, giving it a special appeal.

Carrying out the upholstery of MDF doors, it should be understood that this is a laborious work. Therefore, if you do not have the skills to work with such materials, it is better to entrust the solution of this task to an experienced specialist who will do everything faster and better.

For information on how to properly sheathe the door with MDF panels, see the next video.

Recommended: