Installation Of A Slatted Ceiling: Do-it-yourself Installation Of A Suspended Ceiling Made Of Aluminum Slats, Step-by-step Instructions

Table of contents:

Installation Of A Slatted Ceiling: Do-it-yourself Installation Of A Suspended Ceiling Made Of Aluminum Slats, Step-by-step Instructions
Installation Of A Slatted Ceiling: Do-it-yourself Installation Of A Suspended Ceiling Made Of Aluminum Slats, Step-by-step Instructions

Video: Installation Of A Slatted Ceiling: Do-it-yourself Installation Of A Suspended Ceiling Made Of Aluminum Slats, Step-by-step Instructions

Video: Installation Of A Slatted Ceiling: Do-it-yourself Installation Of A Suspended Ceiling Made Of Aluminum Slats, Step-by-step Instructions
Video: Linwood Ceiling Install by Acoustigreen and Architectural Surfaces 2024, March
Anonim

The slatted ceiling occupies a special place in the modern interior of housing, as it allows not only to create an original design, but also hides all the flaws of the bearing surfaces. Unlike other hinged systems, these structures can be installed even in rooms with high humidity.

Thanks to a huge selection of colors and textures, such ceilings are well suited to any style of room decoration. They are characterized by excellent performance properties and are easy to assemble, so installation work can be done independently without the help of masters.

Image
Image
Image
Image

Features of the

The slatted ceiling is a modern type of ceiling structure, which consists of a frame system, sheathed with decorative panels. Usually, the finishing material is made of aluminum (0.3-0.6 mm thick), but there are also slats made of plastic and steel. To give the product a more aesthetic appearance, manufacturers often varnish the panels.

The installation of a slatted ceiling depends on the size of the slats, since they can be of different lengths: from 50 to 200 mm … Therefore, before starting the installation work, an accurate calculation of the material must be done.

In order to correctly calculate the number of rails, the ceiling surface is measured, its area is determined, and only then the panels of the required length are selected.

Image
Image
Image
Image
Image
Image

It is worth noting that the slatted ceiling is much stronger than traditional PVC structures, but it looks more massive and can corrode.

The frame of the system is assembled from skirting boards, hangers and bearing profiles, which are equipped with special grooves. The hangers can be used with both spokes and springs … As for the skirting boards, they are U-shaped and are designed to hide the edges of the slats and give the ceiling a beautiful look.

Image
Image

Suspended rack systems have many positive characteristics, which include:

  • practicality and durability;
  • wide range of designs;
  • moisture resistance;
  • ease of installation;
  • a light weight;
  • wide scope;
  • easy care.
Image
Image
Image
Image

Therefore, installing such ceilings indoors, you can not only decorate the interior in an interesting way, but also not think about new renovations for many years.

Views

Today, manufacturers produce slatted panels with various decorative elements, using the most modern technologies for this. Due to this, the material is of high quality and can acquire an original color and texture. The front side of the slats is both embossed and smooth; coated with matte or glossy varnish.

Such ceilings, depending on the design features, are divided into two types:

  • Covered … The installation of the rails is carried out in such a way that the gaps between them remain open. At the end of the finish, they are decorated with special inserts.
  • Closed … Installation of panels in this way is a monolithic surface that does not require additional decoration.
Image
Image
Image
Image

In addition, the reiki may differ in shape:

  • "Italian" … Their corners are rounded.
  • "German" … The panels are produced with strict rectilinear outlines.
  • Designer … Such a finishing material is made to order, and it can be represented by complex geometric shapes. Therefore, the ceiling is original and unusual. Often, slats in the form of the letters S, V or P are chosen for the interior.

Since a non-standard profile is used for installation, the process of installing the system is considered complex.

Image
Image
Image
Image
Image
Image

In order to choose the right type of slats, one should take into account not only their beauty, personal preferences, but also the functional purpose of the room, its level of illumination.

Suspended panels are made from various materials that can be combined with any design details. Rails are usually produced from aluminum, steel and plastic.

Slat aluminum ceiling is the most popular option in the interior. It has a lot of advantages, since it includes all the positive properties of plastic and metal. Aluminum withstands temperature drops and moisture well. It is lightweight, durable and also corrosion resistant. Also, the material does not support the combustion process and is not flammable

Aluminum structures look great in the design of kitchens and bathrooms.

Image
Image
Image
Image

Steel type suspension systems, as a rule, are used for decoration of warehouses and offices. Steel is characterized by high sound insulation, is durable, but does not withstand moisture and can rust. Therefore, the surface of such a metal ceiling should be well treated with special mixtures and try not to install it in rooms with an unstable microclimate

Image
Image
Image
Image

The ceiling made of plastic slats has proven itself well., since it is inexpensive and is in no way inferior to the previous options (in terms of external characteristics). The material is not afraid of moisture, but it is fire hazardous and supports combustion. Therefore, the installation of a plastic ceiling is not possible everywhere. For example, in the kitchen (under the influence of constant evaporation and high temperature), the material loses its attractiveness and begins to fade

In addition, the plastic quickly burns out in the sun.

Image
Image
Image
Image

There are also natural wood slats on sale. Of course, a wooden ceiling will be a chic addition to any interior, but buying the material and installing it will be very expensive. Therefore, most owners prefer cheaper and more practical types of material.

Image
Image
Image
Image

Installation

It is possible to install a suspended ceiling system from slats with the help of specialists or independently. If the structure is going to be assembled by hand, then it is necessary, first of all, to draw a draft of the future structure, perform calculations and purchase all the components.

To do everything right, novice masters need to follow step-by-step instructions.

Image
Image
  • At the first stage of work in the room where it is planned to install the ceiling, repairs should be carried out and the surface of the slabs should be prepared for sheathing. To do this, clean the base from the old finish and seal large cracks with plaster. Then you need to collect all the furniture and things in the room: they can be taken out to another room or covered with foil.
  • At the second stage, it is important to determine the place of installation of the chandelier and lamps.
Image
Image
Image
Image
Image
Image
  • The next step in the installation will be to mark the height of the future ceiling. This is best done using a laser level. The points are marked on the wall, and a line is drawn from them, along which the guides and the starting profile will be installed. If the walls in the room are lined with decorative tiles, then the installation of the structure should be carried out taking into account its seams. Otherwise, the composition of the ceiling will be visually skewed (even regardless of whether the slats are assembled horizontally or vertically).
  • Then the fastening of the starting profiles is done. They must be cut to the dimensions indicated in the installation diagram. Points for drilling holes are marked in the profiles, and places for fastenings are drilled from the outside with a drill. The same procedure is done for the dowel holes.

In order not to violate the integrity of the structure, the profiles at the corners can be bent or cut at an angle of 45 degrees.

Image
Image
Image
Image
  • Then you need to assemble the guide profiles and mark the places for fixing the suspensions. The suspensions should be mounted in such a way that the distance between the traverses is 120 cm. In this case, the step between the suspensions themselves should not exceed 60 cm. This technology will make the structure strong and reliable. The traverses can be mounted to the hanger using dowels or using special fasteners, which are often included in the kit.
  • When the supporting structure is ready, all that remains is the assembly of the battens. This is not difficult to do, because each of the panels has a comb, with which the strips are simply snapped to the profiles. It is advisable to carry out installation with gloves so as not to stain or scratch the decorative coating of the material. The outermost slats are cut to size.

To do this, on their inner side, they carry out several times with a knife, make an incision with scissors and break off.

Image
Image
Image
Image

Manufacturers

Recently, the construction market has been represented by ceiling slats from both domestic and foreign manufacturers. Has proven itself well Cesal products … It is very popular, as it has established itself with high quality and positive customer reviews. The slatted ceilings of this company are characterized by a wide selection of shapes, sizes and colors.

In addition, the finishing material has all quality certificates and undergoes a unique treatment, due to which a three-layer enamel is applied to the surface of the panels. Therefore, this finish is not afraid of mechanical damage, resistant to moisture, high temperature and corrosion processes.

Image
Image
Image
Image

Widely used and Albes products … The company produces aluminum slatted ceilings with a modern design. Perforated panels look especially beautiful in the interior. They are produced in both closed and open design types. At the same time, stylish and interesting inserts are necessarily included in the package of open ceilings, thanks to which the design of the room turns out to be chic.

Also deserves special attention manufacturer Geipel … This company appeared on the market quite recently, but has already managed to establish itself from the best side. The slatted ceilings of this production have a stylish look and original decor. In addition, during the manufacture of slats, the company uses only environmentally friendly raw materials that are safe for health and perfectly tolerate the effects of external factors.

Image
Image
Image
Image

Advice

The process of assembling a slatted ceiling is simple, but novice craftsmen who will do this for the first time need to know how to draw a diagram of a suspension system correctly, attach a structure and select a material. Simple tips will help you avoid mistakes during installation.

  • Before installing the ceiling, you should make accurate measurements of the room, taking into account the presence of niches and protrusions.
  • In advance, you need to choose a method for attaching the rails. If the elements are placed along, then the room will be visually longer, and the transverse direction, on the contrary, will expand the space.
  • In addition, panels with a matte surface are best installed in bathrooms, and with a glossy surface - in corridors and passers-by.
Image
Image
Image
Image
  • For gapless mounting, it is recommended to place the strips along the viewing direction. Thus, the seams will not be visible.
  • The most difficult is the diagonal installation of panels, it is better to entrust it to specialists.
  • Profiles should be purchased with a margin. For finishing ceilings in standard-sized rooms, as a rule, I use 70-100 mm strips.
  • The protective film from the rails must only be removed immediately in front of the fastening, otherwise they may be damaged and stained.
Image
Image
Image
Image

Beautiful examples in the interior

Today, there are many options for decorating rooms with slatted ceilings. Such suspension systems look beautiful in the kitchen. Unlike other types of decorative finishes, the surface of the ceiling from the slats is resistant to mechanical damage and moisture. For the kitchen, you can choose both single-level and multi-level ceilings from slats in gray, white or brown. The designs of thin slats with colored inserts look original.

They will favorably emphasize the main background of the interior of the room and will harmoniously fit into any style.

Image
Image
Image
Image
Image
Image

Slatted ceilings are often installed in bathrooms. In this case, it is recommended to choose compositions consisting of white and black colors. This combination is considered classic and is suitable for large and small spaces.

The black palette will add elegance and austere style to the interior, while the white tint will help fill the space with volume and light.

Image
Image
Image
Image

An interesting option for the bathroom will also be a beige slatted structure: a pastel tone will give the room a cosiness.

You can also decorate the design with blue panel ceilings. If there is good lighting in the room, then it is possible to experiment with dark blue and purple colors.

Image
Image
Image
Image

For information on how to make a do-it-yourself aluminum slatted ceiling in the bathroom, see the next video.

Recommended: