Sealant For Laminate (30 Photos): Which Gel Is Better For Joints, How To Choose Colored Sealants For Grouting After Laying, The Advantages Of Silicone

Table of contents:

Sealant For Laminate (30 Photos): Which Gel Is Better For Joints, How To Choose Colored Sealants For Grouting After Laying, The Advantages Of Silicone
Sealant For Laminate (30 Photos): Which Gel Is Better For Joints, How To Choose Colored Sealants For Grouting After Laying, The Advantages Of Silicone

Video: Sealant For Laminate (30 Photos): Which Gel Is Better For Joints, How To Choose Colored Sealants For Grouting After Laying, The Advantages Of Silicone

Video: Sealant For Laminate (30 Photos): Which Gel Is Better For Joints, How To Choose Colored Sealants For Grouting After Laying, The Advantages Of Silicone
Video: Silicone or Caulk, Which one to use and why. 2024, March
Anonim

Laminate is one of the most popular types of flooring. However, such material has its drawbacks, expressed in low moisture resistance and the likelihood of a squeak, and to eliminate them during installation, you can use a special composition - a sealant.

Image
Image

Why do you need it?

As a rule, budget laminate options do not have good moisture-repellent characteristics. With prolonged use of the floor covering, voids and cracks may form at the joints, which leads to the appearance of a squeak. In order to improve the performance of the laminate and to avoid many of the problems associated with flooring, it is recommended to use a special sealant during installation.

When laying the laminate, the lamellas are fastened to each other using special locks. The lower layers and locks of the floor covering are most sensitive to moisture and mechanical stress. The top decorative layer of the floor covering cannot provide full protection against moisture.

Water can easily seep into the inner layers, leading to deformation of the flooring.

Image
Image
Image
Image

The laminate sealant protects the interlocks from external influences, which allows to increase the life of the floor covering. It can be used not only in rooms with high levels of humidity, but also in extremely dry rooms to protect the floor surface from drying out.

Laminate sealant is applicable for the following purposes:

  • protection of seams from moisture penetration;
  • preventing the likelihood of the formation of cracks in the joints;
  • using acrylic sealant, you can seal the chip on the laminate;
  • ensuring the possibility of wet cleaning the laminate flooring.
Image
Image
Image
Image

Only a high quality sealant can cope well with all tasks.

Such material must have the following characteristics:

  • environmental friendliness and safety for human health;
  • high level of protection against moisture penetration into the gaps between laminate panels;
  • the floor covering can be removed and used for secondary installation;
  • ease of application;
  • wide range of operating temperatures;
  • high drying speed;
  • does not leave dirt on the laminate;
  • does not bond laminate panels;
  • increases the level of noise insulation.
Image
Image

Characteristics

Laminate sealant specifications will vary depending on the mix.

When buying a gel, you should pay attention to the following indicators:

  • Material color. Available in both colorless transparent and pigmented gels.
  • Drying speed. The average drying time of the putty is fifteen to thirty minutes. It is recommended to use the treated coating twenty four hours after applying the sealant.
  • Mixture consumption per one running meter.
  • Expiration date of the sealant.
  • The presence or absence of properties such as moisture resistance and frost resistance.
Image
Image
Image
Image
Image
Image

Composition

The composition of the sealant will depend on the specific type and manufacturer of the material.

Most mixtures contain the following components:

  • Antiseptic additives. Capable of preventing the spread of mold and mildew.
  • Quartz flour or chalk.
  • Pigments.
  • Organic extenders. These components are used to reduce the viscosity of the sealant mixture.

The sealant should not contain toxic substances - it is recommended to make a choice only in favor of environmentally friendly materials. Also, a high-quality laminate composition should have good elasticity.

Image
Image

Views

Depending on the composition of the sealant, the properties and characteristics of the mixture will differ.

According to their composition, laminate binders are divided into two main types:

  • silicone-based;
  • based on acrylic.

The silicone version is characterized by elasticity, good adhesion and strength. Silicone based putties are completely environmentally friendly. The mixture is easy to apply and does not leave marks on the surface.

It should be noted that silicone variants cannot be painted in one color or another. You can purchase a transparent material or a mixture of the desired shade.

Image
Image

Acrylic laminate sealant can be used to repair minor defects (chips, cracks) in the flooring. In terms of structure, the acrylic-based material is less hard and more elastic than the silicone version. Gels based on them are rarely colorless.

It is recommended that you carry a sample of your laminate to help you choose the right color gel for your flooring.

Image
Image
Image
Image

Brands

Despite the wide range of sealing compounds for laminate flooring, consumers most often prefer proven brands. Below are the most popular brands.

Click Guard

Click Guard is a German-made waterproof sealant. Protects the interior of the laminate and locks from moisture penetration. Click Guard can be used in the kitchen, loggia, bathroom and hallway.

Image
Image
Image
Image

The sealing compound has no adhesive properties and does not interfere with the disassembly of the laminate. The material is produced in a 130 gram tube. The tube consumption can be from 8 to 10 m2. Drying time can vary from 15 to 25 minutes.

Image
Image

Buyers will highlight only one drawback of this product - the high cost.

Among the advantages are noted:

  • Ease of application. The mixture has a rather thick consistency and does not flow.
  • Slight smell. You can carry out work in an unventilated area.
  • Short drying time.
  • After drying, the sealant forms a thin transparent film on the surface. Excess trapped on the front side of the laminate can be easily removed.
  • High quality.
Image
Image

Click Protect

The Click Protect sealing gel of the French-German concern Bostik is used for the installation of laminate flooring with snap joints. The sealant reliably holds the planks together and protects the coating from moisture penetration. The material is made on the basis of polyurethane. When dry, forms a transparent film on the surface, which is easy to remove.

Available in a 125 ml tube. One tube of the mixture is enough to process ten square meters of surface. The sealant dries on the surface within 30 minutes.

Image
Image
Image
Image

Click Protect has both positive and negative reviews.

Consumers highlight the following product advantages:

  • good moisture protection;
  • ease of application;
  • short drying time.

In the process of using, consumers have identified the following disadvantages:

  • Strong smell.
  • Possesses adhesive properties. Does not allow dismantling of the laminate.
  • Burns through the substrate.
  • Large consumption of the mixture.
Image
Image

Masterfix

The Russian-made Masterfix sealant mixture is universal for processing wood, parquet boards, laminate and MDF. It performs the functions of a sealant and has adhesive properties, therefore, a laminate treated with such a composition cannot be used further after dismantling.

The glue is available in a wide range of natural wood shades. The standard dispensed volume is 290 ml. The mixture has a high drying rate. Work on applying the sealant should be carried out no more than 15 minutes.

Image
Image
Image
Image

Protect Click

Protect Click, a Russian-made sealant, is designed to protect laminate joints. The sealing compound protects the surface from moisture penetration and also improves the wear resistance of the coating. This material can be used for floor treatment in damp rooms or in halls with high traffic.

In addition to moisture resistance, Protect Click sealant has frost resistance properties. It is produced in the form of a colorless gel in a 125 ml tube.

One tube of sealant is designed to treat ten square meters of coverage.

Image
Image

Reviews of Protect Click gel are extremely positive.

Buyers highlight the following advantages of the material:

  • high quality;
  • excellent protection of joints against moisture penetration;
  • promotes good fixation of the floor covering;
  • high drying speed;
  • does not interfere with the further use of the laminate after dismantling.
Image
Image
Image
Image

Which one is better to choose?

There is a wide range of laminate sealants on the modern building materials market.

When choosing the right material, you should pay attention to the following factors:

  • The purpose of the application. The material can be used for sealing joints during installation, grouting after laying, restoring old floor coverings.
  • The quality of the sealant mixture. Not always a high price or a well-known trade mark indicates a good quality of the material. Before buying, it is better to read reviews of popular products.
  • Composition of the sealant. It is necessary to pay attention to the presence of harmful toxic components. The purchased product must not be hazardous to health.
  • Drying time.
  • Application instructions. The method of applying the sealant is always indicated by the manufacturer on the packaging. From some features of the use of the material depends on how easy it will be to coat the joints with such a composition.
  • Mix color. Colored acrylic sealant can be used to repair minor imperfections on the laminate surface.
  • Consumption. Before carrying out repair work, you need to calculate the required amount of sealant. The consumption rate of the mixture is indicated by the manufacturer on the package.
Image
Image

How to apply correctly?

Treatment of laminate joints with a sealant is carried out when installing a new coating or to strengthen the old one. The joint between tile and laminate without a sill can be sealed with silicone sealant.

In case of repair of the laminate or dismantling for further use, the old layers of sealant must be carefully cleaned. The sealant can be removed with a solvent or metal spatula.

After the cleaning procedure, the laminate locks should be wiped with a soft cloth.

Image
Image
Image
Image

Work on the formation of the joint is required to be carried out with special care. The laminate and parquet board sealant must adhere to the sides of the joint without penetrating the back surface. The back surface of laminated panels can be protected with a special spacer or polyethylene.

The process of applying the sealant is as follows:

  • The sealant tube is inserted into the seam at a 45 degree angle.
  • Pressing on the tube, you need to evenly apply the gel to the surface. To facilitate this process, it is recommended to use a special sealant gun.
  • Care must be taken to ensure that no untreated areas remain at the joints.
  • If the sealing mixture has gone beyond the seam, then it must be removed from the surface using a spatula moistened with water.
  • The procedure for applying the sealant and joining the planks must be carried out quickly enough. Fifteen minutes after application, most sealants begin to set.
  • Excess sealant can be removed from the surface with a damp cloth or special products.
Image
Image

For more information on how to choose a laminate sealant, see the next video.

Recommended: