Laying Quartz Vinyl Tiles (24 Photos): How To Lay Interlocking Quartz Vinyl Tiles, Installation Technology On A Substrate

Floor 2023

Table of contents:

Laying Quartz Vinyl Tiles (24 Photos): How To Lay Interlocking Quartz Vinyl Tiles, Installation Technology On A Substrate
Laying Quartz Vinyl Tiles (24 Photos): How To Lay Interlocking Quartz Vinyl Tiles, Installation Technology On A Substrate

Video: Laying Quartz Vinyl Tiles (24 Photos): How To Lay Interlocking Quartz Vinyl Tiles, Installation Technology On A Substrate

Отличия серверных жестких дисков от десктопных
Video: How To Install Luxury Vinyl Tile 2023, February
Anonim

Quartz vinyl tile coverings contain quartz sand. Thanks to such a filler, such products are distinguished by wear resistance, increased resistance to stress, water resistance and ease of care.

Image
Image

Views

Quartz vinyl tiles are laid in two main methods:

  • floating;
  • adhesive (when the tile is firmly attached to the surface).

Quartz vinyl tile materials are usually glued, while vinyl flooring has a self-adhesive backing. Gluing tiles on your own is usually more difficult, but it is easier to correct mistakes while the adhesive is still fresh.

Image
Image
Image
Image

The floating method of stacking is suitable for products with snap joints. They can be:

  • mechanical;
  • adhesive.

Free-lying tile products are also presented on the modern market. The installation of such coatings is unique: the tiles do not connect to each other and do not attach to the floor, but simply press against it.

Image
Image
Image
Image

Preparatory work

Before carrying out installation work, it is necessary to prepare the floor and carry out the markings. The tiles themselves need to be unpacked, folded into small piles and leave for some time indoors (for acclimatization). It usually takes at least 24 hours to wait.

Image
Image
Image
Image

Base

The floor on which the quartz vinyl material is to be laid must be dry, level and solid. Make sure the base is clean and free of any damage.

If the base is in an unsatisfactory condition, it is recommended to clean it, deal with all defects. Depressions, cracks, sagging and chips should be eliminated.

It should also be borne in mind that elastic tiles are highly sensitive to defects on the floor - especially in cases where the installation is adhesive. The adhesive layer is quite thin, so voids can appear due to depressions or cracks.

Image
Image
Image
Image
Image
Image

To make the concrete surface as flat as possible, you can use a cement-sand screed. For leveling wooden floors, sheet products (oriented strand board, plywood) are suitable - they will serve as a good substrate for the tiles. Holes for fasteners, as well as the seams between the sheets, must be repaired with putty.

The surface on which the quartz vinyl tile is to be laid must not be too damp - no more than 5%… You can determine this indicator using a special device. When gluing tiles, in some cases it is necessary to use a primer.

Image
Image

Markup

Quartz vinyl tile products come in different shapes. The most common options include:

  • long and narrow products;
  • rectangular materials;
  • tiles in the form of squares.

The laying pattern will depend on the type of tile. Rectangular products are usually displaced, while square products can be laid as evenly as possible. Laying can be diagonal and straight. If a floating method is used, then markup is usually not needed: laying is carried out from left to right, and starts from the far corner of the room.

Image
Image
Image
Image

Bonded and free-lying tile materials should be laid from the center of the room. In such cases, markup is necessary.

It must be carried out as follows:

  • Determine the centers of two opposite walls.
  • Use a cord to connect the center points.
  • From the middle of the cord, perpendiculars should be drawn to the remaining surfaces to indicate the second axis.
  • Then you need to designate additional lines, focusing on the main axes. Laying the tiles along the lines is quite easy. If necessary, you can designate diagonal axes.
Image
Image

Technology

With a lock

When laying tile products with mechanical fasteners, it is not necessary to leave expansion gaps. In the first row, you will have to cut the grooves that are against the wall. It is not recommended to use a hammer to knock out the tiles, and in order for the products to adhere to each other as tightly as possible, you can not knock on them very hard with your palm.

Image
Image
Image
Image

If the lock is glued, the elements begin to be laid from the corner. Keep the lines as straight as possible.… Make sure that the tiles do not move relative to each other. If necessary, the products can be moved apart and errors corrected. However, it should be borne in mind that after the glue dries, it will be much more difficult to do this.

Glue

If the styling is adhesive, it is better to opt for the composition recommended by the manufacturer quartz vinyl tile materials. Using a notched trowel, glue the prepared floor. The layer thickness must be the same. It is recommended to choose a tool with triangular teeth - it is much more convenient to work with it.

There are adhesives on which tile products can be laid immediately after application. In other cases, you have to wait a few minutes. There should be no gaps between the products - well-laid tiles should be connected very tightly. You need to lay tiled coverings from the center.

Image
Image

It is necessary to ensure that there are no air bubbles between the floor and the products, and for a better fit, you can roll it from the center to the edges, using a special roller for this - this way you can remove excess glue and air. It is possible to use a cork board instead of a roller. Excess adhesive should be wiped off immediately using a cloth dampened with alcohol.

You can walk on tiled surfaces immediately after installation, however you can expose them to stronger loads only after 24 hours, but it is better to wait two days… Wet cleaning can be done after a few days.

Image
Image
Image
Image

Free lying

Laying loose tile products is very easy. Such tiles have a special base, thanks to which the products adhere perfectly to the floor. Before carrying out installation work, tile materials must be stored indoors for at least two days. The temperature in the room should not be too low, the floor itself should be as flat as possible.

You need to start laying the tiles from the place where the guiding axes intersect. The products must adhere very tightly to each other. When installing free-lying tile flooring, glue can be used.

Image
Image
Image
Image

It is recommended to do this in the following cases:

  • products will be exposed to heavy loads;
  • the floor is rather crooked;
  • it was not possible to completely remove dust from it;
  • the surface is too dry.

Apply the adhesive only around the perimeter of the room. The floor can be used 12 hours after installation work.

Image
Image

Undercutting

You need to trim tile products directly during installation work. The sequence of actions should be as follows:

  • it should be noted on the tile the line along which the cutting will be carried out;
  • using a sharp blade, it is necessary to cut the product approximately half the thickness;
  • you need to break the product along the line and finally cut it.

In some cases, it is necessary to prepare the cardboard template in advance, for example, when laying next to a column or a ledge.

Image
Image

Quartz vinyl tile coverings are usually laid without gaps, since such products do not expand under temperature conditions.However, in some cases it is recommended to leave a small distance between the walls and the quartz-vinyl tiles, the same applies to thresholds. Silicone sealant must be used to fill this gap.

In this video, you will find a master class on laying lock-type quartz vinyl tiles.

Popular by topic