Vetonit Putty: LR, TT And KR Putty, Technical Characteristics And Consumption Per 1 M2, White Mixtures For Dry Rooms

Table of contents:

Vetonit Putty: LR, TT And KR Putty, Technical Characteristics And Consumption Per 1 M2, White Mixtures For Dry Rooms
Vetonit Putty: LR, TT And KR Putty, Technical Characteristics And Consumption Per 1 M2, White Mixtures For Dry Rooms

Video: Vetonit Putty: LR, TT And KR Putty, Technical Characteristics And Consumption Per 1 M2, White Mixtures For Dry Rooms

Video: Vetonit Putty: LR, TT And KR Putty, Technical Characteristics And Consumption Per 1 M2, White Mixtures For Dry Rooms
Video: SAVETO Vetonit Putty WR mixed by Portamix and sprayed with T-Max 6912 - AEMCO 2024, March
Anonim

Repair and construction work and putty are interrelated concepts, since finishing work is unthinkable without leveling the walls with a pasty mixture - putty. It is thanks to this composition that the walls have a perfect, ideal look, on which you can subsequently glue wallpaper, apply decorative plaster. Today, manufacturers offer a huge amount of putty on the construction market, and in order to figure out which one is most suitable for repair, you should heed the advice of experts.

Image
Image

Features of the

Very often, when choosing a tool for treating and leveling walls in stores, a person is at a loss - on the packages of mineral mixtures based on a binder, there are two different names: putty and putty.

A powdery (or in the form of a paste) mixture, which includes gypsum, mineral fillers, chalk and wood glue, is called a putty. Manufacturers offer types of this building material with different compositions:

  • based on latex components;
  • oil;
Image
Image
Image
Image
  • oil and glue;
  • acrylic.
Image
Image
Image
Image

Depending on the composition, the putty is used only for internal or external work. The principle of using the putty is similar, and it should be noted that there is no fundamental difference between these names.

Experts in the construction field consider Weber Vetonit to be one of the best putties. The manufacturer of this building material is rightfully considered world famous - it is a subsidiary of the Saint-Gobain industrial group, formed back in 1900.

Today Weber is the leader in dry mortar production. The company's enterprises are present in all parts of the world, producing a range of products for construction and renovation work.

Image
Image

The undoubted advantages of Weber Vetonit putty:

  • the mixture is made from ecological raw materials - it does not emit toxic substances;
  • moisture resistance - it is used even in the construction of swimming pools;
  • the composition is powdery, so the surface of the wall to be treated becomes perfectly smooth;
  • the snowflake painted on the package of the mixture indicates that it can be used at low temperatures to decorate the facade;
  • the composition in a diluted form can be stored for 24 hours.
Image
Image
Image
Image

Types and composition

Vetonit putty is used at the final stage of finishing work before directly gluing wallpaper or decorating with decorative plaster. The basis for the putty is the ceiling and a smooth surface, and not necessarily concrete, but also plasterboard. The main factor for such a process is the presence of a dry surface, since otherwise yellow spots will appear through the putty.

The main composition of Vetonit dry mix is aggregate (limestone) and binder. However, some types of putty are slightly different from each other. First of all, it is worth paying attention to the notation used by manufacturers: mixtures with the LR marking are used only for dry rooms, VH - in rooms with high humidity.

Image
Image
Image
Image

In the list of building mixtures, there are two types with similar names: Weber. Vetonit LR and Weber. Vetonit LR + silk

Putty Weber. Vetonit LR - This is a paste, which is the most popular mixture for treating surfaces to which wallpaper or paint is going to be applied. It evens out the walls perfectly, but is only used in dry, heated rooms. Vetonit LR is not a moisture resistant material and is not suitable for tiling. A polymer adhesive is used here as a binder. The putty can be applied perfectly to the surface and effortlessly. Retains its properties after dilution with water for more than a day

It is recommended to apply Vetonit LR in two layers. It is packed in packages of two types: 5 and 25 kg.

Image
Image
  • Weber. Vetonit LR + silk - an excellent solution for finishing walls and ceilings. The mixture dissolves very quickly and is applied in a thin layer. Differs in increased whiteness, for which it was nicknamed "white silk". Experts believe that it is the most convenient to work with.
  • Vetonit TT - a universal compound used for starting and finishing. The mixture is based on cement. It can be used both indoors and outdoors. It is frost-resistant and not afraid of water. The putty is also applied as a base coat and before tiling. It is diluted with water and mixed with a drill. The resulting solution must be used within three hours. Sold in a 25 kg three-layer paper bag.

After applying the first layer, you must wait for it to completely dry and harden - this usually happens after 1-2 days.

Image
Image
Image
Image

Packaging marked KR used for finishing (finishing) work before wallpapering or painting walls. Packaged in bags of 5 and 20 kg. It is used only in dry rooms, it is ideally applied in thin layers up to 3 mm. The bonding element in this composition is glue based on organic substances, which explains the specific smell during application. After drying, the smell disappears. Diluted Vetonit KR can be stored for 30 hours in an open container and twice as long in a closed container

Image
Image
Image
Image

Moisture resistant Weber putty. Vetonit VH perfect for both outdoor and indoor use. Easy to apply to concrete and aerated concrete. The paste prevents condensation from forming on the ceiling, therefore it is widely used in rooms where moisture is present. In addition, the manufacturer Weber offers cement-based inter-tile grouting of various color shades for a full range of finishing works

Grout is used in working with any tiles and mosaics: floor and wall. This material is frost resistant and does not stain the tile surface.

Image
Image
Image
Image

Specifications

High-quality mixtures from Vetonit have a lot of advantages over analogues from other manufacturers. First of all, these are their technical characteristics, or rather, methods of diluting putties.

First of all, it is necessary to dilute the powder with water in the required proportions. It depends on the thickness of the paste applied to the wall surface. In some cases it is from 0.5 mm to 3 mm, in others the putty should be thicker.

Image
Image

It is necessary to correctly calculate the number of packages of the mixture for the room. For example, when using a white polymer mixture - Vetonit LR Fine superfinishing putty for the ceiling and walls of dry rooms - the consumption per 1 m2 will be 1.2 kilograms of the mixture.

The mixture itself in water should not be dissolved entirely, but in portions. The water should not be very cold - about 20 degrees is enough. Then you need to wait until the mixture is infused. After that, it must be thoroughly stirred again using a special mixer or an ordinary drill.

Image
Image
Image
Image

The mixture is applied in two ways:

  • using special equipment by mechanical spraying;
  • by hand, applying the ready-made mixture to a spatula and rubbing it over the surface of the walls.

In any case, the finished plaster layer should not exceed 5mm, otherwise it will dry for a long time, and the next stage of work will have to be postponed.

In order not to be mistaken in the choice, you should pay attention to the appearance of the mixture. According to GOST "Vetonit" can be gray or white. The differences are explained by the composition of the mixture - if it contains gypsum, limestone or finely ground marble, then the mixture will be lighter. It is necessary to pay attention to the expiration date, which the manufacturer indicates on the packaging itself - it should not exceed 18 months.

Image
Image
Image
Image

Scope of application

The manufacturing company offers modern customers whole complex solutions in the field of construction: from starting and finishing wall covering to facade insulation.

All types of putties produced at the company's factories are ideal for indoor and outdoor finishing work.

Most of the mixtures are made on the basis of polymer components that are ready-made binders. After the putty is applied to the wall or ceiling, it hardens, after which you can glue wallpaper on it or simply paint the surface.

Image
Image

Depending on which filler is chosen: for dry rooms or rooms with high humidity, Vetonit will provide an ideal appearance of the treated surfaces. Once the walls have dried, they can be finished with tiles, glass or plastic.

Putty is also used for high-quality sealing of gypsum plasterboard plates, on the surface of which, after that, the appearance of cracks is excluded.

After the process of filling the walls is completed, an unpleasant odor may appear in the room. However, it will wear off immediately after the mixture is dry. This feature is inherent in many materials for construction work.

Image
Image
Image
Image

If the gypsum plaster "Vetonit" is used, then after the work performed, you can apply a putty on it - a high-quality mixture will extend its service life. Choosing a moisture-resistant mixture marked VH on the package for work in wet rooms (in the bathroom, in the kitchen or in the pool), you do not have to worry - it is not afraid of a humid environment. That is why such a composition is often used in the processing of warehouses and the facade of the building.

Such special mixtures as "Vetonit TT" are also used on surfaces consisting of ceramic bricks or aerated concrete. Such a putty is frost-resistant, neither mold nor fungus will appear on it, which is very important in regions where a cold and humid climate prevails.

Image
Image
Image
Image

Selection Tips

According to experts, all Vetonit products have two important qualities: they are very convenient and problem-free to apply to the surface, and the preparation of the finished mixture takes a matter of minutes.

True, it is necessary to take into account useful tips when working with the material:

  • It is important to remember that the rest of the mixture should never be poured into the sink or toilet.
  • Before processing with putty, the surface of the walls or ceiling must be thoroughly dried.
  • For a basement or bathroom, you should choose only Vetonit TT packaging, as it is versatile and not afraid of moisture, moreover, it is made on a cement basis. Such a composition must be mixed with water in a proportion of 25 kg per 6 liters of water.
  • The surface to be treated must be clean, free from stains and dust, and if it is very dry, then it should be moistened.
  • The minimum layer of the mixture to be applied is 0.5 mm, the maximum - 0.7 mm.
  • It is necessary to putty the surface with "Vetonit" on an adhesive base when everything is already dry, and only then to glue the wallpaper.
Image
Image

You will learn how to putty the walls on your own in the following video.

Recommended: