How To Install Horizontal Blinds On Plastic Windows? Installation Methods, How To Hang Correctly

Table of contents:

How To Install Horizontal Blinds On Plastic Windows? Installation Methods, How To Hang Correctly
How To Install Horizontal Blinds On Plastic Windows? Installation Methods, How To Hang Correctly
Video: How To Install Horizontal Blinds On Plastic Windows? Installation Methods, How To Hang Correctly
Video: Choosing Installation Inside or Outside Mount | Zone Interiors 2023, February
Anonim

Arrangement of the interior often involves the choice of decor for the windows. Today, horizontal blinds are increasingly used for such purposes. Structures of this type are distinguished by ease of operation and a long service life. Installation of blinds requires special skills, so not always a beginner can solve this problem. If you do not know how to install horizontal blinds on plastic windows, be sure to consult with a specialist.

Image
Image

Benefits

Horizontal blinds are several thin plates that are interconnected with a thread. This allows you to control their location in different planes. Such designs are of several types, each of which differs in the material of the lamellas.

The most common modifications are considered to be blinds made of aluminum plates. This product has many benefits:

  1. The metal perfectly withstands temperature extremes, and also does not lend itself to destruction under the influence of ultraviolet radiation.
  2. The lamellas are lightweight, but with a fairly large margin of safety They resist deflection well.
  3. Do not burn.
  4. The material does not accumulate dust, grease and odors. Perfect for both the modern office and home kitchen.
  5. The service life can reach 20-30 years (with proper care).
  6. Relatively simple and quick installation.
  7. Ease of maintenance. To clean the surface, simply wipe the surface periodically with a damp sponge.
  8. The design takes up little space, which allows them to be installed in almost any interior.
Image
Image

Wood products are another popular type of horizontal blinds. These products have the following advantages:

  1. The material protects the room very well from light penetration.
  2. The wood does not heat up.
  3. Products are environmentally friendly. They do not accumulate dust, which allows them to be used in the bedroom or nursery.
  4. Unique design. Lamellas are made from various types of wood. This allows you to choose a drawing at your discretion.
Image
Image

It should be understood that wood is afraid of moisture, therefore it is not recommended to use such blinds in the kitchen or in other damp rooms.

Lamellas are also made of polymer materials today. Plastic blinds are distinguished by the following features:

  1. The quality of light protection is the best among all the models reviewed.
  2. Cleaning the plastic is pretty easy. In this case, you can use almost all household detergents.
  3. The material tolerates moisture well.
  4. Service life is practically unlimited.
  5. The plastic construction is light and lightweight.
  6. Plastic tolerates high temperatures well. This allows blinds to be installed even in swimming pools and bathrooms.
  7. Ease of use.
  8. Relatively low price.
Image
Image

But plastic is not a versatile material. Louvers should not be installed near any heat source. This can lead to deformation of the plates. Also, the polymer quickly fade in the sun and gradually turns yellow.

Mounting methods

Horizontal blinds are available in various standard sizes and modifications that can be adapted to the specific characteristics of the window. Such systems can be mounted in various places:

  1. To the ceiling. This type of placement is only possible for solid foundations.
  2. On the sash… Fixation takes place directly on the window frame itself.Often, such options are found when small-sized blinds are used for each individual glass.
  3. To Wall. One of the most popular mounting methods. It is used for structures that completely cover the entire surface of the window.
  4. Into the window opening. Here, installation can be carried out directly on the base of the frame or on the ceiling of the slopes.

When choosing the location of the blinds, one should take into account their functionality and design features. All these characteristics must be qualitatively combined with each other.

Image
Image
Image
Image
Image
Image
Image
Image

Installation preparation and measurements

Installation of horizontal blinds is technically possible without a certain amount of experience. The procedure for marking the fasteners begins. For this, the structure is applied to the location of the future location and the locations of the brackets are marked. It is important that the system is positioned strictly horizontally.

If the products were sold disassembled, then the blinds should be assembled before marking. All such operations must be performed only on the basis of the manufacturer's instructions. This will avoid skewing and possible damage to elements during operation.

When marking, it is important to consider the location of the product. The mechanism should not interfere with the opening of the sash, unless, of course, it is mounted directly on top of it.

Image
Image

Installation methods

No drilling

Many manufacturers have simplified the installation of horizontal blinds as much as possible. You can attach this structure yourself using the following fasteners:

  • Double sided tape. Fastening can be carried out either directly using adhesive tape or using special brackets. The latter option involves fixing the fasteners with this tape. Please note that this installation option is only possible on the window sash itself. To obtain a reliable fixation, it is important to first degrease its surface. After that, the markup is done. It is necessary that the canvas is located strictly parallel to the plumb line. If there is a misalignment, then this will lead to rapid wear of the control mechanism. When the whole system is aligned, you can fix the structure on the window.
  • Clamps. This option can only be used for opening sashes. The installation process involves fixing the clamps directly on the cornice. To do this, you just need to put them on. After that, the sash opens and these fasteners are hung on it. This is quite simple to do, since you need to press the mechanism a little, and it will snap into place.
Image
Image
Image
Image

Drilled

A more universal way of installing blinds is to use special metal brackets. With their help, you can mount products both on a wall or ceiling, and directly on a plastic window sash.

This operation consists of the following sequential steps:

  1. Initially, the location of the cornice is selected and the marking is done.
  2. Hole formation. Please note that if you mark the places under them incorrectly, this will lead to a skew. Since extra holes in the wall are useless, everything should be done carefully.
  3. Fastening brackets. To do this, use special screws or anchors, which are often included in the kit.
  4. Installation of the cornice. This element is fixed on special latches. This operation does not require significant effort.
  5. Installation of the canvas.

It should be noted that this method of fastening does not depend on the location of the eaves. Here, the type of bracket and the location of the latches on the surface of the blind frame can only differ.

Image
Image
Image
Image

How to hang on a window opening?

The algorithm for installing blinds on the wall consists of several sequential steps:

  1. First of all, you need to decide if all the components are available. If the blinds are more than 2 m wide, then they must be supplemented with an intermediate fixing. This eliminates the sagging of the cornice.
  2. The next step is markup. For this, the blinds are located above the window in the right place. Then they retreat from the ends by about 3 cm and mark the locations of the brackets.
  3. When all the marks have been made, you should use a drill to drill holes for the dowels. It is important to choose the correct hole diameter in order to form a strong connection of the fastener to the wall. If the structure is wide, then you need to similarly drill a hole in the middle for an additional dowel. Please note that for heavy aluminum or wooden blinds, the distance of the end screws must be at least 10 cm from the edge of the eaves.
  4. When the brackets are screwed on, a cornice is hung on them. It can be fixed in several ways. The most convenient is the mechanism with self-latching locks. Simpler products need to be screwed to the frame using self-tapping screws or screws.
Image
Image
Image
Image

The process of installing blinds in the opening itself can be described by the following sequential actions:

  1. Initially, the technical equipment of the product is checked. Pay attention to the size of the curtain rod. The method of its attachment depends on this.
  2. Blinds assembly. The process is carried out in accordance with the manufacturer's instructions.
  3. Markup. For this, the cornice is installed on the plastic window sash. Sometimes installation is possible on the ceiling of an opening or on a wall that forms above the frame of the frame. It is important, while taking measurements, to check whether the blinds impede the movement of the opening leaves. The places where the brackets are attached are also marked on the base.
  4. After that, holes are drilled and fasteners are attached. Do not drill deeply as a through hole can be made. If the fixation takes place directly on the plastic, you should use special self-tapping screws.
  5. The process ends with the hanging of the cornice and canvas. This process is similar to that described in the previous section.
Image
Image

Please note that all stages of installation of horizontal blinds are very similar to each other. They differ only in small nuances, which depend on the mechanism itself and its design features.

Care

The technical equipment of the blinds is quite simple and can last for a long time. Moreover, products of this type do not need any special care. Experts recommend periodically cleaning the slats from dust. Please note that this should be done with a damp cloth. If the elements are made of wood, do not use aggressive solutions.

Image
Image

If it is necessary to thoroughly clean the blinds, you can "wash". To do this, they are detached from the eaves and then washed with warm water and soap. Do not use boiling water as it will affect the structure of the product. When the slats are washed, they need to be wiped dry and then hung up.

Installing horizontal blinds is a relatively simple operation that requires a little care and attention. If you are not sure that you can cope with this on your own, it is better to entrust this task to specialists.

For information on how to make blinds with your own hands, see the next video.

Popular by topic