Installation Of Vertical Blinds: Installation Methods, How To Properly Mount And Hang On A Window, Ceiling Mount

Table of contents:

Installation Of Vertical Blinds: Installation Methods, How To Properly Mount And Hang On A Window, Ceiling Mount
Installation Of Vertical Blinds: Installation Methods, How To Properly Mount And Hang On A Window, Ceiling Mount

Video: Installation Of Vertical Blinds: Installation Methods, How To Properly Mount And Hang On A Window, Ceiling Mount

Video: Installation Of Vertical Blinds: Installation Methods, How To Properly Mount And Hang On A Window, Ceiling Mount
Video: How to Install Bali® Vertical Blinds with Wand Control - Outside Mount 2024, March
Anonim

Installing vertical blinds is a fairly easy process. If you know the step-by-step installation instructions, then it will not be difficult to do it yourself. Moreover, vertical blinds have long been not just an accessory in the office space. They have firmly entered the living rooms of most apartments. Fabric types of blinds help to create additional comfort and are quite practical.

Image
Image

Benefits

Vertical blinds, as the name implies, are a simple and convenient light-shielding structure consisting of longitudinal vertical plates.

Image
Image

They differ from horizontal ones:

  • More aesthetic appearance. Horizontal blinds are more functional, while vertical ones are decorative;
  • The ability to cover a large area with one cornice. Horizontal blinds, as a rule, consist of narrow slats and are intended for minimalistic decoration of small windows. Vertical models come in different widths and easily cover large windows, arches and doorways.
  • Variety of materials. They can be wooden, aluminum, bamboo, plastic, woven and non-woven fabric, mirror, blackout, thread. The abundance of options provides another advantage - the variability of colors and textures;
Image
Image
  • Modern and original window decoration, opening up more design possibilities;
  • Simplicity of control mechanisms. Both mechanical and electrical control are possible;
  • The ability to place photo printing on the "curtains" due to the larger surface and characteristics of the material;
Image
Image
  • Practicality. Larger lamellas are easier to wipe and dedust if necessary, which occurs infrequently. If, in the case of severe pollution, for example, in a children's room, the lamellas still need to be subjected to hygienic procedures, this will not take much time - they can be washed by hand and in a washing machine;
  • Possibility of installation on non-standard windows (triangle, trapezoid, arch, bay window);
  • The structure is subject to repair. To replace a particular part, you do not need to call a master, it is quite simple to do it yourself. It is possible to replace the lamellas one at a time without having to dismantle the entire structure.
Image
Image

In appearance, vertical blinds look like a series of longitudinal plates of dense fabric or rigid materials, fixed to the cornice. They move sideways, going behind each other and forming a narrow strip that resembles a curtain.

From the point of view of construction, the blinds are arranged a little more complicated: a cornice with fastening elements and a control mechanism, plus fittings.

Image
Image

They consist of the following elements:

  1. Bearing cornice, on which the curtain is fixed and a decorative cornice (groover), which plays the role of a facade.
  2. Runners for attaching lamellas.
  3. Lamella holder or "shoulders" are devices that connect vertical plates with a bearing cornice.
  4. Weights that make the canvas heavier.
  5. A connecting chain running along the bottom edge of the lamellas.
  6. Control chain for turning the plates to different positions around the axis.
  7. A control cord with a weight - for the ability to move and open the curtains.
  8. Actually, lamellas are vertical plates that form a light-shielding sheet on the window.
Image
Image

Fittings and components: ceiling bracket, groover bracket, fasteners, corners, clamps, stoppers and c-clips, rod rings, chain locks, replacement parts. A description of the accessories is included in each manual. The design may vary slightly depending on the control mechanism.

Image
Image

Mounting methods

There are three types of blinds fastening: to the wall, to the ceiling, directly to the frame, and two ways: with drilling and without drilling. The universal basis of any fastening is a cornice, which is attached in various ways to a wall, frame or ceiling.

Image
Image

Drilled

It is carried out using self-tapping screws, brackets on which the cornice is installed, fishing lines. Additionally, you will need a pencil, ruler, drill, screwdriver.

First you need to make a markup in those places where the brackets will be located. For reliability and accuracy, it is necessary to drill holes for fixing in the marked places. Then, applying the brackets one by one to the PVC frame, fix them on the markings with a screwdriver. Next, the cornice is installed and the whole structure is assembled.

Image
Image

No drilling

If in the future it is planned to replace blinds or other window decoration options, it is not recommended to damage the plastic windows. The holes from the self-tapping screws will remain in the frame forever and significantly spoil the appearance of the windows.

In this case, it is easier to turn to a method that does not require drilling.

Image
Image

In this case, the brackets are attached in two ways.:

  • for the upper part of the PVC profile on the opening sashes (you can simply hang it like a hook);
  • on double-sided tape, which can be glued without fear of leaving traces.
Image
Image

Mounting blinds on the balcony requires a special approach … The balcony structure plays an important role here. The type of glazing determines the choice of certain blinds and the method of their attachment. In general, almost all options are available for balconies. In this case, special attention should be paid to the type of blinds, since not all of them are universal for different types of windows. For example, horizontal blinds are not suitable for a balcony with sliding windows, as they can deform during operation or from strong winds.

Image
Image

Preparation and measurements

The final result depends on how correctly the measurements are made. Even expensive beautiful models will not look good on the window if there are gaps in the opening or the edges of the lamellas will constantly bulge against the wall.

Image
Image

It is important to pay attention to the following points:

  • For the most accurate indicators, a steel tape is used;
  • It is impossible to round off the figures obtained, the accuracy must be observed to the millimeters;
  • When ordering blinds, the width parameter is specified first, length - the second;
  • Not a single window opening has absolutely perfect geometric shapes, therefore, measurements upward and in breadth must be made at least at two points.
Image
Image

When installing in the armhole of the window, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right sides of the arch, subtract 1 cm from the smaller value. For wall mounting, at least 10 cm must be added to the wide side of the slope. The length of the lamellas can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor; Ceiling mounting means determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch 100+ mm.

Image
Image

Installation instructions

Installation of the cornice

Vertical blinds are the most convenient way to decorate a window for self-execution. They are attached in three ways: to the ceiling, to the drilled frame, to the frame without drilling.

In all cases, the fastener is a cornice with or without a decorative facade. The brackets on which the structure is held are fastened with self-tapping screws, hung or glued to double-sided tape. Special adhesive tape, despite its seeming impracticality, is fixed very firmly, therefore it is important to correctly apply the markings for installing the brackets. After it is glued, it will be very problematic to move it.

Image
Image

Assembly

Assembly procedure for vertical blinds:

  1. Preparation of tools. You will need: a ladder, a set of self-tapping screws from the kit, a building level and drawing accessories, a drill, a screwdriver.
  2. Pencil markings for mounting brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
  3. Attach brackets in a suitable way (with or without drilling).
  4. Installation of the cornice.
  5. Installation of slats. To do this, you need to pull the control cord, on which the lamella mounts are located, so that they fit into the desired position. Then fix all the lamellas on the hooks of the fasteners.

How to install on a custom window?

Installation work on the design of a non-standard window requires certain skills and experience, but if you want to try it yourself, you need to take into account some of the nuances and features.

The installation of blinds begins long before the preparation of the work surface and the set of tools. The first step in this process is a balanced decision about the type and variety of blinds, material, color and texture, depending on the functionality of the room. So, it is more advisable to choose vertical blinds for the living room that let in light, for the bedroom automatic electric roller blinds made of blackout fabric, and for the kitchen, where cooking smells and food combustion products constantly soar, plastic blinds that do not absorb grease and dirt.

Image
Image

The second important point is correct markup. Much, if not all, depends on it, including how easy the installation process will be. If all the features of the architecture of window openings are taken into account by specialists when ordering blinds from them, everything will go smoothly and easily without the help of professional installers.

It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, whether there is a risk of deformation for them.

Image
Image
Image
Image

The installation of blinds must be carried out exactly with markings and subsequent verification of the functionality of the structure. The most important point here is the choice between drilling with or without drilling.

It is also necessary to provide for the type of control. For low windows, one of the types of mechanical direction is an excellent solution.

For skylights, tilted windows, bedroom windows, magnetic or automatic electric control is suitable.

Image
Image
Image
Image

Below you can see step-by-step instructions for installing vertical blinds.

Recommended: