Lamps For A Bath (75 Photos): Features Of Lighting In A Steam Room, Waterproof And Heat-resistant Options, Which One Is Better To Choose

Table of contents:

Lamps For A Bath (75 Photos): Features Of Lighting In A Steam Room, Waterproof And Heat-resistant Options, Which One Is Better To Choose
Lamps For A Bath (75 Photos): Features Of Lighting In A Steam Room, Waterproof And Heat-resistant Options, Which One Is Better To Choose

Video: Lamps For A Bath (75 Photos): Features Of Lighting In A Steam Room, Waterproof And Heat-resistant Options, Which One Is Better To Choose

Video: Lamps For A Bath (75 Photos): Features Of Lighting In A Steam Room, Waterproof And Heat-resistant Options, Which One Is Better To Choose
Video: 5 Best Ceiling Lights 2024, March
Anonim

A lamp for a bath is a specific type of lighting fixture that carries, first of all, a practical functional load. The aesthetic side of such products is secondary.

Image
Image
Image
Image
Image
Image
Image
Image

Features of the

Lamps designed for baths differ from other lighting devices in that, due to special operating conditions, increased requirements are imposed on them. For a long and safe service life, the products must have the following properties:

  • durability. To exclude damage from mechanical stress and destruction from high temperatures, the luminaire body must be very strong;
  • environmental safety. The materials from which the product is made must not release harmful elements into the environment;
  • fire safety. It is preferable that the cartridge and other structural parts are ceramic. This will prevent them from igniting in unforeseen situations, for example, a short circuit or an emergency sharp rise in temperature in the bath room, which may occur in the event of a malfunction of the thermostat during electric heating;
  • heat resistance. The luminaire must withstand temperatures ranging from 100 degrees in Russian and 150 degrees in Turkish baths, up to 200-250 degrees for ceiling versions;
  • moisture resistance. The level of protection for sockets and switches in baths requires at least IP 44, and for lamps - IP 54;
  • reliability. The luminaire must be sealed with rubber or silicone, especially for luminaires equipped with an incandescent lamp. Otherwise, in a steam room, the lamp will burst into small fragments and injure a person;
  • durability and anti-corrosion properties. The details of the product should not quickly deteriorate, and the plafond or lampshade should not lose its aesthetic original appearance.
Image
Image
Image
Image
Image
Image

Materials (edit)

Not all materials are suitable for the production of lampshades and lampshades due to the specific external influences to which the products are exposed. More suitable are:

  • glass. For shades with a wall-mounted type of attachment, thick glass of a milky or matte shade is used. Provided the product is completely sealed, an incandescent lamp can be used. Glass lamps differ in the color and shape of the shades; from above they can be covered with a metal grill. There are also exclusive options, for example, a lamp made in the form of a kerosene lamp. The combination of glass and dark semi-antique metal looks very impressive. Since the product is quite voluminous, it is recommended to use it in spacious baths;
  • heat-resistant types plastic and plastics, aluminum and stainless steel also used in the production of lighting fixtures for the bath. The main requirement is heat resistance and environmental friendliness;
Image
Image
Image
Image
Image
Image

Himalayan salt. Natural material with a beautiful structure that creates soft shimmering light and has a healing effect. It can be used in the form of lampshades or solid slabs that serve as a diffusing screen for various light sources. When the salt surface is heated, the room is ionized and useful elements are released, which creates a powerful therapeutic and prophylactic effect

Staying in such a microclimate is very useful for bronchial pathology, skin and nervous system diseases.

Plafonds and decorative diffusing screens made of Himalayan salt do not lose their healing properties throughout the entire service life.

Image
Image
Image
Image

The ionization intensity remains at the same level even after a long period of time. When heated, the molecules of the substance release vapors containing many useful trace elements. This property explains the healing and healing effect, which is similar in healing power to the healing effect of the salt caves, so popular in recent years.

Himalayan salt slabs and lampshades differ from each other in shades. You can choose more saturated colors with a slightly lower transparency, or you can choose products in pale pink shades that transmit light well and simulate mesmerizing lighting, thanks to the beautiful pattern of the structure of the material.

Image
Image
Image
Image
Image
Image
Image
Image

Lampshades and screens made of Himalayan salt do not require special care. It is enough to carry out wet processing, removing dust and dirt. Salt lamps can be used in any room of the bath and sauna, but the most useful from the point of view of health improvement, they will be in the steam room. Products are produced in a wide price range, the cost depends on the size of the model and the complexity of the design, which allows you to purchase a budget version of the lamp.

The wood blends harmoniously with the sauna interior, continuing the image and being the final touch of the design. This natural and environmentally friendly material is ideal for making wooden screens and grilles. In the factory production of wooden lampshades, abasha, linden and cedar wood are used. These rocks perfectly tolerate the high humidity of the Russian bath and the dry heat of the Finnish sauna, without losing their beautiful appearance, without swelling or drying out.

The cheapest material is linden. It smells good and can withstand temperature changes well. Abash and cedar are expensive species with a beautiful wood structure, durable, moisture resistant and strong. You cannot burn yourself about them, which is very convenient in steam rooms and washing rooms.

Wood products are used in any room of the bath.

Image
Image
Image
Image
Image
Image
Image
Image

Lampshades that are made of several wood species with different structures look spectacular. For the independent production of gratings and screens, it is better to use bast, vine and birch bark. These are inexpensive breeds, they are perfectly cut and polished, they are moisture resistant and are not afraid of high temperatures. Coniferous trees, namely pine and spruce, do not need to be used in the production of lampshades due to the high resin separation in a hot steam room. You can burn your hands on such a product.

Wooden lampshades are made in the form of a lattice or a screen with scattering one or more holes, through which the light flux passes. Luminaires can be attached to the bearing surface in an angular and wall-mounted way. Corner is suitable for small rooms, allowing you to save space and evenly illuminate the space.

The lamp on the corner-type models is protected more reliably than on the wall-mounted one.

Image
Image
Image
Image
Image
Image
Image
Image

The decorative lattice is in perfect harmony with the wooden interior of all the premises of the bath and can be made of slats or round rods fixed in the grooves of the frame. This type of lampshades looks great with decorative barrels, buckets and tubs, as well as with fenders.

Varieties

The lamps differ in their purpose and the possibility of using them in a particular room of the bathhouse due to the light sources with which they are equipped. In conditions of high temperatures and high humidity, the following types of lamps are capable of working:

incandescent lamps… The body of models with this type of lamp must be moisture resistant and sealed using rubber or silicone seals. The safety class of the luminaire must be at least IP 56, and the lamp power must not exceed 60 W. Products with this type of lamps are the worst suited for use in baths and saunas due to the fact that during operation the lamps get very hot, and if splashed, they can burst, injuring visitors

Image
Image
Image
Image

LED elements moisture resistant, fireproof and reliable. Some models with an IP 65 safety index can be used even under running water. They significantly save energy. When placed in a steam room, it is required to install a protective diffusing screen, grille or matt shade due to the very bright light flux, which will quickly tire the eyes

Image
Image
Image
Image

Many products with such lamps are equipped with a remote control, which allows you to adjust the brightness and shade of the emitted light flux.

Such specimens are expensive, but with their help you can get the effect of a starry sky or a play of shadows and light.

Image
Image
Image
Image

In the conditions of a bath, both lamps and ribbons can be used, which gives great possibilities for decorating the room and allows you to diversify the design.

The tape can be installed under the shelves, without interfering with the visitors of the bath and creating muted diffused lighting. Under it, you need to install a substrate made of heat-resistant plastic, stainless steel or aluminum. The disadvantage of lamps with LEDs is that under constant exposure to high temperatures, the LED elements quickly fail, and the remote control needs a protective waterproof case;

Image
Image
Image
Image
Image
Image
Image
Image

Fiber optic light sources are completely safe due to the transmission of light by glass wires by means of a light wave and the absence of electricity in elongated tubular wires. They can be used even at the bottom of the pool, they can easily withstand temperatures of 300 degrees, so they are quite suitable for ceiling lamps. Good for wet Russian baths and dry Finnish saunas. They emit soft light, are easy to install and durable.

The light of the fiber-optic element does not blind the eyes, which makes it possible not to use grilles and lampshades when implementing interesting design solutions. The advantage of fiber optic elements is the ability to create numerous lighting effects, including the aurora borealis and fire, to achieve which you will need to purchase a light filter, colored lens or a special decorative attachment.

Fiber-optic lamps are expensive, but the result obtained and the complete safety of the product justify the high price;

Image
Image
Image
Image
Image
Image
Image
Image

Other varieties also include:

halogen The lamps are suitable for use in steam rooms, they are low-voltage - they have a power of 20-35 W and a radiation spectrum close to natural, therefore they are absolutely safe for eyesight, resistant to high temperatures and high humidity. They are not afraid of splashes and are available with shades and half shades of different colors, which allows you to choose a lamp that is suitable for any room in the bath

Image
Image
Image
Image
Image
Image
Image
Image
  • luminescent lamps. They have the ability to adjust the brightness, they are energy-saving, but they do not tolerate frost well, therefore they should not be used in country baths, standing in a cold climate and not used daily;
  • gas discharge lamps can only be used in auxiliary rooms of baths and saunas: in the dressing room, dressing room and rest room. They are categorically not suitable for operation in high external temperatures;
  • infrared lamps. They have a power of 250-300 watts. The radiation frequency is from 1400 to 3000 nm, and the remote control allows you to adjust its intensity. Silicone wire must be used when mounting the lamp. Infrared radiation has a healing effect, so products with such a light source are becoming popular;
  • energy saving lamps. It is possible to install devices equipped with such lamps in rooms with a temperature not exceeding 60 degrees. For a steam room, where the air warms up above 100 degrees, their use is dangerous. In the dressing room, hallway, dressing room, washing room or in the break room, the use of energy-saving lamps is allowed.
Image
Image
Image
Image
Image
Image
Image
Image

Installation

Before proceeding with the installation of the luminaire, you need to carefully read the instructions for use of the product.

You need to start the installation by fixing the luminaire body on the supporting surface.

After securely fixing the base, put on the shade, fix the shade, screen or decorative grill. Next, you need to completely de-energize the room if the installed models are not wireless. If there is a lack of illumination, use a portable light source or put a flashlight, and only after that start electrical work.

The luminaire must be powered from an electric meter, necessarily equipped with automatic fuses, which, in the event of an unforeseen situation, will quickly de-energize the device.

Image
Image
Image
Image

Since the operating conditions of the luminaires are quite specific, there are some rules for their location. One of the main rules is that lighting fixtures should not be installed in areas with the highest temperature. Some models of lamps can be placed only in auxiliary rooms - dressing rooms, dressing rooms and lounges. therefore before purchasing lamps, you need to draw up a plan for their placement in the bath zones, determine the amount and level of protection for each room.

Image
Image
Image
Image

You should also determine in advance the places in which the installation will be carried out. This must be done, guided by the type and characteristics of the lamps with which the devices are equipped, taking into account their brightness, tendency to overheating and moisture resistance.

Lamps should not interfere with vacationers with too bulky design or poor location.

Features of installing a lighting device in a steam room:

  • the luminaire should be installed away from the heating element or stove;
  • when placing, take into account the brightness of the lamp. Too bright light will not let you relax, and dim light will cause eye strain, so it is better to use diffused lighting;
  • it is preferable to place the device in a corner or at the junction of the ceiling and wall. In this case, it will not interfere with the steaming ones, which will exclude mechanical stress and accidental damage to the device;
  • LED strips can be installed in various areas: corners, on the backs of benches and walls. They are not afraid of exposure to moisture, so they are not afraid of clouds of thick steam;
  • the ceiling is the hottest place, so you need to choose lamps that can withstand temperatures up to 200 degrees;
  • placement of decorative grilles. The location of the lattice shade determines the shape of the luminaire. For angular placement, a trapezoidal or triangle-shaped lattice is suitable. Rectangular and square models are best placed on the wall. And the grille, made in the form of a semicircle, will allow you to achieve diffuse lighting.
Image
Image
Image
Image

Placement rules in the sink:

  • you need to use only moisture-resistant models with closed sealed cases and a high degree of protection - IP 55 and 56, or fiber-optic and LED strips;
  • you should choose products of medium brightness, with a soft pleasant light;
  • decorative wooden lampshades should be made of rocks that are not prone to swelling. It is better to direct the lamp towards the wall, on the previously nailed curved plate. This will help avoid streaky shadows.
Image
Image
Image
Image
Image
Image
Image
Image

Break Room Installation Tips:

  • due to the absence of extreme external conditions, the lighting device is selected in accordance with the design of the room and the taste of the owner;
  • simultaneous use of several lamps of different intensities is allowed to conditionally divide the room into different functional zones, using the effects of blinking, fading and alternating colors, a chandelier can also be used.
Image
Image
Image
Image
Image
Image
Image
Image

For information on how to connect the electrical wiring in the bath, see the next video.

Which to choose?

When choosing a lamp for a bath, you need to take into account not only the technical characteristics, although they are certainly a priority, but also the aesthetic component.

The device should harmoniously fit into the interior of the room and not look like something foreign and defiant.

The style of the room and the lamp must also match. For modern bath interiors, an interesting solution would be to combine several types of light sources at once. For example, the use of combined LED and fiber optic lighting will create a beautiful illumination, and the water in the pool inside the sauna illuminated in this way will create a unique atmosphere.

Image
Image
Image
Image
Image
Image
Image
Image

They are engaged in the production of specialized lighting devices for baths and saunas that can withstand high temperature loads. a number of famous factories:

products of the Swedish company Tylo and the Finnish Harvia deservedly is in high demand among buyers. In the products they produce, all technical requirements for luminaires operating in extreme conditions of high humidity and high temperatures are taken into account. The products are waterproof, so they can be placed anywhere, even on the ceiling. Due to their strength and tightness, such lamps are able to work for a long time. In addition to reliability, durability and safety, all Tylo and Harvia models are attractively designed and available in a wide price range. This allows you to purchase a lighting device that will meet the needs of even the most demanding consumer

Image
Image
Image
Image
Image
Image
Image
Image
  • Linder company. The models produced at the factories of this company are slightly inferior in their performance to the products of Tylo and Harvia, but due to the low price, the sealed case, which can be safely used in washing and shower rooms, the lamps of this manufacturer are also in demand in the market of lighting fixtures for baths;
  • lighting devices of the German company Steinel are gaining popularity with consumers. Thanks to the built-in motion sensor, the light is turned on only as needed, which significantly saves energy and allows you to install the luminaires without using switches, ensuring safe use. The manufacturer guarantees a long service life and reliability of products, which are distinguished by an optimal price-quality ratio.
Image
Image
Image
Image

Beautiful examples

The correct use of light will help create a favorable atmosphere and make your sauna experience pleasant and comfortable. In addition to their practical purpose, lamps are a worthy independent design element, enliven the interior and indicate the good taste of the owners.

Recommended: