Garage Door Operator: How To Choose, Features Of The Came Electric Operator From Germany

Table of contents:

Garage Door Operator: How To Choose, Features Of The Came Electric Operator From Germany
Garage Door Operator: How To Choose, Features Of The Came Electric Operator From Germany
Video: Garage Door Operator: How To Choose, Features Of The Came Electric Operator From Germany
Video: Garage Door Opener Buying Guide – Door Operator Type 2023, February
Anonim

You can also open garage doors manually, but using a device such as a drive allows you to provide real comfort and convenience. You do not need to carry a bunch of keys from different locks - one key fob is enough.

Image
Image

Features of the

The modern drive is divided into two main groups: supplied with automation in the kit and sold without it. This distinction is quite justified, because it allows you to choose the most suitable type and even mount it without outside help.

Image
Image
Image
Image

Most often, the drive is controlled using:

  • a central coordinating unit using outside door position indicators;
  • systems that recognize the presence of obstacles;
  • remote controls: key fobs, signal receivers and remotes;
  • reversible electric motors, power supply systems and overload protection units;
  • fasteners that hold the actuators to the surface of the support frames.
Image
Image
Image
Image
Image
Image

All these components are absolutely necessary, and depending on personal preference and the specific situation, they can be supplemented with other details. Some devices are equipped with panels for working with contactless cards or keyboards for entering access codes.

Image
Image
Image
Image

Lifting mechanisms must be installed at least 2.5 m above the floor so that the car does not damage the system, and it was difficult for intruders to get inside it.

Principle of operation

Garage door operators resemble plastic boxes with dimensions of 38x25x14.6 cm; long rods or plastic handles are used in the design. Inside there is a chain or cable lift, which is just used to pull the panels up.

Image
Image
Image
Image

A typical electric motor operates on a current of 24 V, the minimum cable cross-section is 0.4x0.15 cm, and the grounding busbars are always connected. Automation and drive systems are often equipped with built-in Hall sensors, who recognize a meeting with an obstacle, but they significantly increase the load on the moving part. As a result, it is possible to reduce the likelihood of injury to users or deformation of the vehicle.

High-quality devices allow you to raise the gate in 1.5-3 minutes… The exact time is determined by the weight of the web and the programmed speeds. They are able to lift even four-meter structures.

Image
Image

Reliable systems are distinguished by the use of warning lamps that allow you to identify a threat. The standard stipulates that the mechanism is capable of performing one hundred cycles of operation, and its resource must be at least 5 years before overhaul.

You can mount the device yourself, the kit of leading manufacturers always includes 100% of the required parts.

Image
Image

Remote control

The electric drive is very easy to operate, and it is possible to adjust the lifts even without the help of service engineers. Those who confidently use TV remotes or modern washing machines can easily deal with such equipment. All transceiver devices operate at 434 MHz, and roll-code coding is used for greater security. The instructions indicate that it is necessary to block the automation and the drive if:

  • the mechanism for 3 or 4 openings in a row was stopped by means of emergency protection;
  • the signal code "emergency reset" appears;
  • if, at the moment of lowering the gate, the lower edge meets an obstacle of 5 cm or more, and the reverse does not automatically start.
Image
Image

When buying, it is better to ask the sellers to show the action of the gate in the last situation.In case of refusal to demonstrate such a nuance, you should refuse to purchase.

Selection Tips

Manufacturers from Germany traditionally produce high-quality and reliable operators for garage doors. Came supplies complete sets for 12,000-15,000 rubles. When comparing its products with quite stable and expensive products from the USA, for example, the Stanleyet 380, it becomes obvious that the “American” lacks the ability to block the device from a distance if an alarm is triggered.

Image
Image
Image
Image

It is important to know that garage door drives require a stable, high quality power supply. Since you don't really have to rely on the conscientiousness of power engineers, you need to purchase an effective voltage stabilizer. Only then can you use a welding machine or other powerful equipment in the garage.

When buying, you always need to be interested in whether there will be a guarantee, and how long it is valid. Professionals are not afraid to provide warranty service for 10-15 years, because they themselves are confident in the reliability and quality of products.

Image
Image
Image
Image

The automation must also be covered by a five-year warranty.

It is necessary to carefully study the instructions, technical data sheets and accompanying documents to be sure that there are no problems. Reputable drive manufacturers always equip their products with automatic systems from one company… If the goods of several suppliers are used at once, then the quality of the products will be too low, and no one will give a guarantee for more than a year.

It is also necessary to read reviews in independent sources, check the service network, since in case of a breakdown, you may have to transport the device to another continent, which is very inconvenient and expensive.

Image
Image
Image
Image

When evaluating the control unit, it is necessary to pay attention to whether it can be installed in a convenient place so that, if necessary, it is always easy to operate the gate manually.

After all, even the absence of a remote control at hand, its loss or failure will not prevent you from leaving at the right time or leaving the car protected. If a manufacturer offers locking devices for sashes as a bonus to the purchase, then this is quite a significant advantage.

Mechanical blocking is completely absent in most modern systems. Transfer to manual control mode is possible in the absence of electricity, but it will not work to lock the gate… The solution to the problem is a special valve that is able to block the input device, regardless of the closed or open position of the gate. Desirable focus on automation, which itself is protected from power surges, because this is not only an economical purchase, but also reliable, and all the equipment turns out to be more compact.

Image
Image

Getting acquainted with the gearboxes of garage doors, you need to check them for the number of adapters - the complication of the design only makes life less convenient. The high quality remote control always has a single control panel, there is no need to use auxiliary panels.

There is no need to try to buy a very cheap device, even if they talk about its wide capabilities. Ultimately, the costs will only be higher, because inexpensive drives quickly fail and cause a lot of inconvenience.

Image
Image

Individuals should not buy three-phase garage door operators, since such machines are intended for use in industrial facilities and in large transport fleets. Unlike single-phase systems, they are more powerful, they do not heat up so much, they have better efficiency indicators and a significant resource.

For sectional doors with a low rise, it is advisable to use chain drives, and the shaft type is considered universal, but the gate will need to be modified.It must be remembered that the power reserve in comparison with the calculated indicators should be at least 1/5 of the part, otherwise the device will not be reliable enough.

Image
Image

You will learn how to choose a swing gate operator for self-installation in the following video.

Popular by topic