Automatic Garage Doors: Automatic Garage Door Openers, Swing Gate Dimensions

Table of contents:

Automatic Garage Doors: Automatic Garage Door Openers, Swing Gate Dimensions
Automatic Garage Doors: Automatic Garage Door Openers, Swing Gate Dimensions

Video: Automatic Garage Doors: Automatic Garage Door Openers, Swing Gate Dimensions

Video: Automatic Garage Doors: Automatic Garage Door Openers, Swing Gate Dimensions
Video: PG SWING OUT AUTOMATIC GARAGE DOORS 2024, March
Anonim

Choosing automatic garage door systems is a tricky business. There are many things to consider: the type of doors, the climate, the location of the box, the opening method that best suits your understanding of comfort. Let's try to understand everything in detail.

Image
Image

Features of the

Automatic gate opening systems were invented for convenience and time saving. Therefore, the main plus is that opening / closing is controlled remotely.

In the first option, you will not have to leave the car. A receiver is mounted on the drive, which, in the presence of a signal, activates the engine. The signal can be transmitted both from the remote control and from a small remote control, which looks like a remote control, but small in size.

Advantages of the system: the ability to customize control from a mobile phone. For this, a special program is installed on the device. Satellite communication is involved in the exchange of signals. Tracking the state of automation is also allowed via a mobile phone. The system is convenient in that you can turn on / off the engine while being within the range of the receiver.

Image
Image
Image
Image
Image
Image

The first minus of the system:

The ability to intercept the signal coming from the console to the receiver. When choosing a system, it is important to pay attention to the quality of the signal coding.

Image
Image

Second minus:

Your neighbors may have a device that works on the same frequency as your receiver.

The reliability of the system is increased by changing the frequency of the receiver.

Image
Image

In the second version, the gate is opened with a button. The level of comfort is determined by its location. The minimum steps are to open the window, rise from your seat, reach out and, finally, start the sash opening mode. The option is convenient as a backup when the control panel is lost or stopped working.

When closed, the gate is blocked. Reliability is determined by the level of protection of the mechanism, which can be selected depending on the need and the size of the wallet.

Image
Image
Image
Image

The main disadvantage of all automation is dependence on the supply of electricity. Without light, the garage cannot be opened or closed.

The problem can be solved in several ways:

  • With an unlocking system. It allows manual opening of the automation. For some reason, manufacturers include this option in the package bundle as an additional option, although it is impossible to do without unlocking.
  • Installation of a backup power supply. The drive is connected to a battery (generator), which will provide an alternative power source in emergency situations.
Image
Image

This is followed by the specific types of systems, depending on the class, quality, determined by the level of production, design features. Manufacturers today offer the customer a wide variety. At the same time, the buyer can choose several automatic systems at the same time.

Features of the choice of automation consist in knowing:

  • guide parameters;
  • types of mechanisms;
  • device power;
  • indicators of the speed of opening / closing;
  • additional opportunities in the absence of electricity.
Image
Image

Gate types: advantages and disadvantages

When deciding on the choice, it is important to take into account the types of garage doors, take into account the advantages and disadvantages of each model. For this, it is important to disassemble the characteristics and dimensions of each type of gate separately.

Swing

The design of swing gates consists in the presence of two strong leaves, which are mounted on hinges, and these, in turn, on opposite pillars of the opening. The doors can be opened both internally and externally.

This is the most common type. The main plus is the simplicity and low cost of the fittings. Although these systems can hardly be called convenient. But for some motorists, swing gates with automatic controls are the most acceptable choice.

Image
Image
Image
Image

The main disadvantage of swing gates is that they require territory to open.

Also worth noting as disadvantages:

  • width limitation;
  • the need to clear snow during heavy snowfalls.
Image
Image
Image
Image

When arranging the automation, you will need electrical wiring separately for each sash. Swing structures can be driven by linear or lever versions. Linear drives offer reliable performance. They are supplied with a control panel. They can also have a double opening system and operate from a button.

Lever sliders can be installed on light gates. The main disadvantage of the engines is the lack of wind resistance.

Sometimes underground swing gate automation systems are used. They are distinguished by their high cost, complexity of installation, and therefore unprofitable. A strong engine is needed to avoid difficulty in winter operation or in high winds.

Image
Image
Image
Image

Recoil

The structure is usually installed at the entrance to a private area. In the process of opening, the canvas can move both to the left and to the right of the opening along the inside of the fence. If the gate opens, then guides attached to the power elements are involved in the work. Roller supports, which are installed inside the beam, are responsible for the movement.

Of the minuses: sliding systems require sufficient space for installation, the system may not work if there are slopes or irregularities.

Image
Image
Image
Image

Benefits:

  • work in all weather conditions;
  • no need to fully open the gate;
  • the possibility of installing photocells;
  • large width, which can reach 12 m;
  • homemade installation of the structure itself as a whole.

One electric motor is involved in the process of opening and closing the system. However, in the absence of electrical power, the system can be easily opened manually.

Image
Image
Image
Image

Swivel-lifting

Lift-and-rotate models are appreciated for their quick action and space saving. A characteristic distinguishing feature is the integrity of the structure, which protects the entrance as a whole.

The process of the system operation consists in smooth movement of the canvas from a vertical position to a horizontal, parallel to the ceiling. Part of the structure protrudes forward with this opening, so the process requires special care: before pressing the button, you should make sure that nothing interferes with the system.

Image
Image
Image
Image

Lift-and-rotate actuators provide:

  • Inclined rise. It can be used for doors up to 500 mm high. The weight of the structure can be up to 1000 kg. It is important to place the guides around the perimeter of the canvas.
  • Vertical lift. Can be used for doors with a height of 500 mm. The weight of the structure can be up to 1000 kg.

The choice of one or another swing-lifting system should be influenced by the parameters of the opening. The system requires high-quality preparation: plaster on the lighthouses.

Image
Image
Image
Image

Such gates have the following disadvantages:

  • Possibility of installation in openings of rectangular type only;
  • Danger when lifting a web that protrudes outward by about one meter.
Image
Image
Image
Image

Sectional

Sectional garage systems are well suited for both businesses and the private sector where there is frequent traffic.

Sectional garage systems have many advantages:

  • Freeing up space on both sides of the garage;
  • High reliability and safety;
  • Possibility of operation in bad weather;
  • Possibility of installation for any width of openings;
  • Installation of thermal insulation.
Image
Image
Image
Image
Image
Image

Two types of engines are used for automation:

  • with ceiling rails;
  • axial.

The ceiling version is connected to the canvas with a cable. It winds up when opened and pulls the panels up. The option is not very powerful, but cheap.

Image
Image

The axial version is installed on an axle located at the top of the structure. The option is more powerful, more expensive, but it can pull a cloth of greater mass.

Image
Image

The main advantage of folding gates is space saving, no need to clear snow. They are better suited for small boxes. Sectional structures do not pose a danger to the car, in contrast to the swing-lifting mechanisms, sectional structures will not touch the equipment with the doors.

Burglary protection is high enough.

Image
Image
Image
Image

The main disadvantage of such gates:

  • unreliability of the canvas, since there is no metal rigidity;
  • the complexity of the design - in the event of a breakdown, specialist intervention is required.
Image
Image
Image
Image

Roll

Automatic rolling doors are perhaps the most modern arrangement for a garage. The main advantage of such structures is their compactness: the roll is assembled over the opening without cluttering the space. In addition, such systems easily cope with protective functions.

An indisputable plus of all types of rolling shutters is relatively cheap. As a disadvantage, it is worth noting the relative lightness of the main canvas, which is not resistant to burglary. Typically this system is used for garages located in a secured private area.

The main functionality is to protect the vehicle from dust, sun and other weather conditions.

Image
Image
Image
Image
Image
Image

The downside is the impossibility of arranging a wicket, so a separate entrance should be planned for the garage. In winter, the main metal mechanism has a tendency to freeze, which is the reason for the incorrect operation of the device.

Image
Image
Image
Image
Image
Image

Manufacturers and reviews

There are a lot of manufacturers on the market who have positive reviews about their products. Here are some popular suppliers of quality products for automatic gate systems:

  • Deservedly high reputation with automatic gates by Doorhan … She has been manufacturing structures since 1994. The company was one of the first to use sandwich panels in its systems. Dorhan's product range includes roller shutters and roller shutters. Recently, the company's production capacity has been expanding due to the appearance of enterprises in China.
  • Has shown itself excellently company from Germany Hormann … Product reliability lies in the use of reinforced components, thick hinges. Also, the systems are supplied with high-quality electronics. The company guarantees uninterrupted opening / closing of systems for 25,000 cycles. The products are suitable for a wide variety of climatic conditions.
Image
Image
Image
Image

The largest manufacturers include Italian Dea enterprise … The company specializes in the production of automatic gate systems and barriers. The company's products include complementary safety accessories.

The products supplied by the company are successfully used both privately and at industrial facilities.

Image
Image
Image
Image
  • Promatic - a young enterprise that successfully copes with the implementation of the assigned tasks. The team performs work related to the development and implementation of various automation technologies.
  • A confident niche is occupied by Austrian automatic systems for garage doors. They are suitable for all climates. Cope with the most difficult tasks.
Image
Image
Image
Image

Operating tips

A common cause of automatic breakdowns is inoperability of the hinges, which is associated with the constant opening / closing of the gate.

Hinges due to rust, drying out grease, poor assembly or weather conditions can:

  • shift;
  • get curvature;
  • stem may break
  • block.
Image
Image

The first signs may be the appearance of extraneous noise and incorrect response to commands from the remote control. To avoid repairs, they should be adjusted in time, and after installation, periodically lubricate the hinges. It is better to entrust the repair of breakdowns to experienced specialists.

Problems during the operation of gates with automatic equipment can be as follows:

Sagging. This happens due to changes in the framework. A common reason is the lack of crossbars. The problem is eliminated by removing the leaves and installing others, it is possible to install additional crossbars.

Image
Image

Due to untimely inspection of the automation, the following breakdowns may occur:

  • poor quality drive operation;
  • slow response of the control panel;
  • slow motion of the drive.
Image
Image

To ensure smooth and long-term operation of the mechanisms, you need:

  • lubricate working hinges and rollers annually;
  • do not forget about the maintenance that the installers must provide;
  • periodically control the smoothness of movement of the gate and the level of the door leaf;
  • periodically remove the appeared contamination;
  • do not allow various chemicals to fall on the guides.
Image
Image

For information on how to choose an automatic garage door, see the video below.

Recommended: