Paint For Plastic In Cans: Mirror Chrome Spray Paint, Spray Paint-spray For Gold

Repairs 2023

Table of contents:

Paint For Plastic In Cans: Mirror Chrome Spray Paint, Spray Paint-spray For Gold
Paint For Plastic In Cans: Mirror Chrome Spray Paint, Spray Paint-spray For Gold

Video: Paint For Plastic In Cans: Mirror Chrome Spray Paint, Spray Paint-spray For Gold

Отличия серверных жестких дисков от десктопных
Video: Testing out A MIRROR IN A CAN?!?!? | MIRROR Spray Paint | 2023, February
Anonim

The stores sell a variety of paints and varnishes, designed for finishing different materials.

Today we will talk about modern plastic paints sold in spray cans.

Features of the

Usually, plastic products are painted at the production stage, but sometimes it may be necessary to repaint the product (or part of it) in a different color in order to change its appearance or restore the old coating. Special spray paints are ideal for such purposes.

Such coloring agents are distinguished by a special composition, thanks to which they perfectly fit onto plastic without harming it.

So that the coating does not peel off when painting the plastic and looks no worse than the factory one, it is necessary to choose a suitable paint and apply it correctly.

Image
Image

Advantages and disadvantages

The advantages of sprays include:

  • convenience and ease of use;
  • even application;
  • long storage;
  • richness of color palette;
  • brightness of colors;
  • resistance to sun rays (do not fade or fade).

This paint will not dry out, even if you have used the spray can several times. In addition, these enamels do not require the purchase of brushes or rollers for application. Consumption is quite economical - one cylinder will last for a long time.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

The disadvantages include the impossibility of self-calling. Of course, the in-store tinter can create any complex color for you upon request, however this will require additional costs.

Also, it is quite difficult for beginners to work with aerosols: paint may drip, apply unevenly.

If it is necessary to paint a small area of ​​the surface, then the entire remaining area must be covered with masking tape so as not to apply paint to it from the spray bottle.

Image
Image
Image
Image

Types and characteristics

The easiest way to work with plastics is to use aerosol sprays. They are much more convenient for home use than cans. There are several types of enamels for painting plastic, produced in spray cans.

Polymer

They combine two functions at once: a primer and a painting. They differ in a higher level of adhesion, therefore they do not require preliminary priming of the surface.

Image
Image
Image
Image

With acrylates and / or polyurethane additives

More durable, damage-resistant formulations that are used to coat surfaces subject to impact and abrasion.

Image
Image
Image
Image

Structural

When this paint dries, the surface becomes rough, hiding minor material defects. Allows you to create a design that is more original than the manufacturer intended.

Image
Image
Image
Image

Soft touch

A can of this paint will give you a velvet-like surface. It's a good choice to add a softer look to your garment.

Image
Image

Monadic

These paints are used on PVC plastics. They are waterproof, adhere well to the surface, and are also protected from ultraviolet radiation.

Image
Image
Image
Image

Areas of use

Aerosol for plastic is used in the restoration of those products that have lost their original appearance, as well as to give them additional strength and moisture resistance. This paint is also used for painting cars and in interior decoration..

Both professional car dealerships and designers and beginners work with it, because it is very convenient.

Image
Image
Image
Image
Image
Image

Tools

Despite the fact that when working with aerosols, you can do without various brushes and rollers, for the convenience of work, you need to prepare the following:

  • "Skin" of small grain size;
  • water, rag and detergent;
  • masking tape, if you do not process the whole product;
  • any degreaser that contains alcohol;
  • primer for some types of plastic (ABS and PVC plastic);
  • protective equipment: goggles, gloves and a respirator or mask.
Image
Image
Image
Image

Stages of work

When enamel is sprayed from a cylinder, a suspension of tiny paint particles is formed in the air, which can get on the skin and into the respiratory tract. Therefore, it is important to put on goggles, work gloves and a respirator (if possible) before starting work.

Surface preparation process

Before proceeding directly to staining, the plastic must be prepared in a certain way.

  • First, the product must be cleaned with a stiff brush and detergent, then rinsed with water and allowed to dry completely.
  • After that, the product is sanded with a "sandpaper", smoothing out all the irregularities. If the defects are too deep, you can use a special plastic primer and level the surface.
Image
Image
  • Then the plastic must be treated with a degreaser, and then you can proceed with the primer, if it is necessary for this type of material.
  • If there are doubts about the type of material, then it is better to put a primer in any case. It will not be superfluous, but it will provide a more reliable adhesion of the paint and the surface of the plastic.

For information on how to properly prepare plastic for painting, see the next video.

Painting

Spray painting takes place in several stages:

  • First, it is necessary to cover all areas not intended for painting with cardboard, film or an unnecessary piece of cloth. Very small areas can be sealed with tape (use masking tape, as ordinary tape can damage the old coating when it is removed). If the product is small, it is advisable to lay it horizontally on some surface over which paint will be sprayed.
  • Shake the can of paint for 30-40 seconds to mix the dye evenly.
  • Remove the spray cap from the top of the can. Apply paint to the plastic with constant smooth movements, without holding your hand in one place to avoid drips.
Image
Image

If you are using a new can, it is advisable to check the color and consistency of the colorant on a separate piece of cardboard or on the least visible side of the product. Also, for the first seconds, paint from the container can come out in jerks. Do not paint the surface until the spray is even and wide.

  • The hand with the spray must be kept at a distance of at least, but not more than 20-30 cm from the surface to be painted.
  • After applying the first layer, let the paint dry for 30-40 minutes. Then you can apply a second layer and let it dry as well. If necessary, it is permissible to apply additional layers according to the same algorithm.
  • Despite the fact that the paint itself dries quickly enough, it is not recommended to use the painted product for one day. During this time, the dyes are finally polymerized, so the surface will be reliably protected from various damages.
Image
Image

Getting a mirror finish

To achieve the effect of a metal polished to a shine of silver or gold color, the plastic is covered with a special paint, and the process itself is called chrome plating.

The price for this service is quite high, so working independently with such a dye is a great opportunity to save money.

Image
Image

In general, the process of working with chrome paint is carried out in the same way as with any mixture for plastic in a cylinder, only a spray is applied to the surface already pre-painted with black paint. Without preparatory staining in black, creating a mirror effect at home simply will not work..

Image
Image

There are several more subtleties of staining for chrome:

  • It is better not to pursue cheapness and purchase proven formulations from foreign manufacturers.
  • It is more difficult to apply such an aerosol than regular paint, so it is worth pre-practicing on various surfaces and areas.
  • If the product will be varnished, it is necessary to first check the compatibility of the purchased paint and varnish. Some types of varnish mixtures can destroy even a correctly applied chromium layer.

It is necessary to be prepared for the fact that paint from a balloon and chrome plating with your own hands does not always give the effect of salon coloring, but the prospects for development in this direction are quite high.

Image
Image
Image
Image
Image
Image
Image
Image

Popular by topic