Odorless Quick-drying Floor Paint: Acrylic Compositions For Wood Flooring, How To Choose A Paint For Wood

Table of contents:

Odorless Quick-drying Floor Paint: Acrylic Compositions For Wood Flooring, How To Choose A Paint For Wood
Odorless Quick-drying Floor Paint: Acrylic Compositions For Wood Flooring, How To Choose A Paint For Wood

Video: Odorless Quick-drying Floor Paint: Acrylic Compositions For Wood Flooring, How To Choose A Paint For Wood

Video: Odorless Quick-drying Floor Paint: Acrylic Compositions For Wood Flooring, How To Choose A Paint For Wood
Video: 18 Best Painted Floors - Painting a Floor Ideas 2024, March
Anonim

No repair is complete without the use of paints and varnishes. The main disadvantage of most paints is a pungent smell, which wears out for a long time and badly affects the well-being of people in the room. That is why the best choice for interior work is odorless paint.

Image
Image

When choosing the right dye, you should pay attention to the quick-drying options that are very popular today. The cost of such products is higher, but its advantages are undeniable, because the repair time is significantly reduced. In addition, most of these paints are made on the basis of natural ingredients.

Image
Image

Many manufacturers offer similar products today. This article will tell you how to choose the right, odorless, quick-drying emulsion among this variety.

Benefits

The demand for odorless paints is associated with a number of advantages that they have:

  • modern products are distinguished by the absence of a specific pungent odor;
  • in the composition there are no toxic substances that cause allergies and negatively affect the body;
  • during work, you do not need to use protective equipment;
  • quick drying of the surface after painting allows you to complete the repair much earlier;
Image
Image
  • paint is applied in a thin layer, which saves material without compromising appearance;
  • after painting, there is no sliding surface effect on the outer layer;
  • modern technologies that are used for the production of odorless, quick-drying paints, provide the mixtures with resistance to sunlight;
  • they can be used to paint floors in rooms with high humidity levels;
  • almost all emulsion and enamel paints of this type contain antiseptic additives that prevent the formation of mildew and mildew.
Image
Image

Types

When choosing a paint, you should first study the assortment. Modern manufacturers offer a wide range of different products. Each type of material has both advantages and disadvantages.

Oil based paints take a long time to dry, which is not always suitable for buyers. To reduce drying time, experts recommend using a highly volatile solvent

Image
Image

Acrylic paint resistant to high humidity, elastic and durable. It is made from natural acrylic resin. The binder here is water. When the water evaporates, the mixture hardens

Image
Image

Alkyd enamel made from natural resin. It is durable and resistant to fading. The quality of the product is very similar to acrylic enamel

Image
Image

Latex - the most expensive paint. Latex is the sap of the rubber plant. To make the paint more affordable for consumers, artificial substitutes are added to it, which make the product cheaper. Due to the fact that the latex paint contains rubber, it smooths out small irregularities and cracks on the surface

Image
Image

Polyurethane paint differs in persistent color, resistance to fading. This composition can be used to paint concrete surfaces and even paving slabs. The wooden floor must be primed before application

Image
Image

How to choose paint for different rooms

If the house is made of timber, and there is no other finishing material, it is recommended to use acrylic wood enamel. This coating allows you to hide surface imperfections and also provides high throughput. Due to the fact that air enters the wood, comfortable conditions will remain in the room.

Acrylic mixes can also be used for timber imitation finishes.

Image
Image

For children's rooms, experts recommend choosing acrylic paint that is easily washed off … She can paint floors and walls, as well as create drawings using a stencil. However, before you buy this or that paint, carefully study the composition, in it there should be no harmful substances.

Image
Image
Image
Image

Acrylic and latex products can be used for bathrooms and kitchens. The main requirement is the presence in the composition of components that prevent the formation of fungus and mold.

For kitchens, it is recommended to choose mixtures that are easy to care for; grease and dirt stains should be easily washed off from their surface.

Image
Image

The hallway and corridors are highly passable, the floors in these rooms are subject to frequent mechanical stress. In this case, it is best to choose abrasion-resistant acrylic-latex mixtures.

Image
Image
Image
Image

Household premises should not be left unattended either. In these rooms, inexpensive wood paints such as vinyl can be used. In rooms where clothes are washed and dried, the same products can be used as for bathrooms.

Image
Image

Conditions affecting the rate of drying of the mixture

How much the surface will dry after painting is influenced by the chemical-physical properties of the mixture. If for some products drying is the evaporation of volatile substances, then for others it is oxidation or a chemical reaction with oxygen. Each type of composition requires specific conditions for high-quality and fast hardening.

Image
Image

To a large extent, the drying process of the mixture is influenced by the room temperature. For example, in cooler rooms, paint will take longer to dry, because in such conditions, all processes are slower.

The most suitable temperature for painting the floor is +20 degrees … Also, the humidity of the room plays an important role. If the room is humid, the oxidation process will be more difficult and the water or solvent will evaporate more slowly.

To achieve the optimal level of humidity, it is necessary to make ventilation or use a dehumidifier

Image
Image

Before painting the surface, it must be carefully prepared, because the strength of the layer and the quality of adhesion of the material to the floor or wall depend on this. Surface preparation consists of removing dust and dirt, old paint, treating grease stains and drying.

Image
Image

Expert advice

A huge range of odorless products suitable for wood and other surfaces to please every customer. Experts recommend taking into account all the characteristics of the paint when choosing it for certain rooms.

Image
Image

If the selection of goods is limited only to flooring, then it is worth choosing paints intended for indoor use and having universal characteristics … After that, you need to decide on the material for which the paint will be applied. It is the chemical composition of the surface that affects its reaction with the mixture. For example, for a room made of boards and cement, choose compounds that withstand high humidity and the influence of sunlight.

Moreover, the mixture must withstand severe frosts and high temperatures … If these requirements are ignored, cracks will appear on the surface later, and the paint will begin to fall off.

Image
Image

Oil or wax paints do not get into the wood, so they are not suitable for such surfaces … In areas where there is a knot on the surface, resin will seep out after a while, as a result of which stains will appear on the floor.

Acrylic or polyurethane enamel on organic solvents will help prevent this. Such mixtures cost more than oil mixtures, but their quality is much better. Dispersion acrylic enamels are resistant to high loads and ultraviolet light, so they can be used in places with high traffic.

Image
Image

Before painting the surface, you should pay attention to the preparation of the base. After all even the smallest defects will be visible after painting.

Remove the layer of old paint from the surface and apply primer. It will not only provide good adhesion of the new paint to the material, but also allow the mixture to be used sparingly. Moreover, the primer protects the wood from the formation of fungi and the reproduction of pests.

Image
Image

If the paint is too thick, brush hairs may remain on the surface., which will also negatively affect the appearance. Therefore, before starting work, the container with paint must be slightly shaken and check if it has thickened.

In some cases it is necessary use special solvents that dilute the paint and make it more fluid. Choose the solvent that is specified in the technical manual for the use of the mixture … The final coat of paint should be applied only after you have made sure that the previous one has laid flat.

Image
Image

Testimonials

When choosing a paint, many first pay attention to the cost of production. In an effort to save money, some buyers choose the cheapest products, but the quality of such products is usually not the best. It is wiser to opt for the compositions of well-known manufacturers, which have already earned many positive reviews.

Image
Image

For example, acrylic enamel 0.9 kg from the Lakra company is estimated at about 450 rubles. A water-dispersion mixture with a capacity of 1.5 liters costs about 850 rubles.

Often, buyers choose odorless products for interior work from the Tikkurila trademark, 0.9 kg of which costs 650 rubles.

Image
Image
Image
Image

It is better to pay more, but get high-quality material, than to save money when buying, but after a year to make repairs again.

For an overview of quick-drying floor paints, see the next video.

Recommended: