Painting Walls With Water-based Paint (29 Photos): Design Ideas, How To Paint Without Streaks, Painting Technology

Table of contents:

Painting Walls With Water-based Paint (29 Photos): Design Ideas, How To Paint Without Streaks, Painting Technology
Painting Walls With Water-based Paint (29 Photos): Design Ideas, How To Paint Without Streaks, Painting Technology

Video: Painting Walls With Water-based Paint (29 Photos): Design Ideas, How To Paint Without Streaks, Painting Technology

Video: Painting Walls With Water-based Paint (29 Photos): Design Ideas, How To Paint Without Streaks, Painting Technology
Video: 29 WALL DECOR IDEAS 2024, March
Anonim

Renovation of the premises takes a lot of time, because attention must be paid to every detail. Such work consists of different stages, each of which plays a role. One of them can be called wall decoration, and for this you need to find high-quality material with which you can achieve the desired effect, make the room presentable and beautiful.

There is a wide range of products on the market for indoor surface decoration, each of which has its own characteristics, characteristics and advantages.

Image
Image
Image
Image

Features of painting

To begin with, it is important to choose the material that will be used to decorate the walls in the room. The application process depends on this, as well as the effect that will be obtained as a result. Such work is responsible and serious, therefore it is necessary to approach it from the right side. In residential premises, water-based paint is mainly used, which is intended for walls. Material with polyvinyl acetate compositions, which has a lot of advantages, is in wide demand. It fits perfectly on plaster in the apartment, as well as on natural wood and gypsum.

The advantages include lack of a sharp and unpleasant odor, there are no solvents in the composition. The material adheres perfectly to the treated surface, can be diluted with water, as a result an elastic coating forms on the walls.

It is important to remember that the paint is used only in dry rooms, so this point must be taken into account.

Image
Image
Image
Image

Why choose water based paints?

For walls, this is one of the best finishing options. The material has an improved ability to create a presentable appearance for a long time. It is formulated with latex, thickener, filler and antiseptic to create a unique blend for wall covering in homes and other areas. Several types of products will open before you, among which there are silicone, mineral, silicate and acrylic coatings. Each of the listed options has its own performance characteristics and creates a special effect when finishing.

Image
Image

Painting tools

It is necessary to stock up on everything you need before starting work, so as not to be distracted by extraneous things. If you decide to start painting on your own, prepare everything in advance, then you can proceed to the task. To knead the material, you will need a construction mixer, but you can get by with a special nozzle.

It is easiest to apply paint to the walls with a roller, and for this you need to have a tray at hand where you will pour the composition.

Some places are difficult to get to, so a brush is needed. The surface must be treated before application, so a spatula and a brush cannot be dispensed with.

Image
Image

The nuances of applying the composition

Before you start using water-based paint, it must be thoroughly mixed, having achieved a homogeneous mass. If the instructions say that water is required for dilution, you need to follow the recommendations. Before painting the wall, apply paint to a small piece of cardboard and wait for the surface to dry to see the result. This will help you avoid mistakes, as well as achieve the effect you wanted to get initially.

Image
Image

Surface preparation

This is the next step after the necessary tools and materials have been collected. Often, the walls are uneven, so this problem has to be solved. Before that, you need to cover the rest of the surfaces with a protective film so as not to get dirty.

It is recommended to use masking tape, which can be used to easily glue the film to the baseboard. This avoids lengthy cleaning after renovation work.

Image
Image

Surface treatment

The walls will need to be cleaned of old finishes, if any. The decorative coating is removed with spatulas, hard brushes and sponges, it all depends on what material was used earlier. If there is whitewash, it can be easily washed off with water and a rag. But after that you have to wait for the surface to dry completely, then you can proceed to the next stage. If everything is done correctly, the duration of the work will be reduced, and the result will be of high quality.

To remove bumps or other imperfections, you will need a primer that can patch up problem areas. If you do not deal with the flaws in advance, after painting they will be better visible., therefore, they will spoil the general appearance of the room, after which everything will have to be redone. To avoid repetitive work, it is recommended to do everything right the first time.

Image
Image
Image
Image

Paint preparation

Water-based paintwork is produced in a thick consistency, which means that it must be prepared before use. For a perfectly even painting, the material must be thinned. For this, simple water is used, which is added to the container with the composition, then everything is thoroughly mixed. A previously prepared mixer will help to cope with this task, but if it is not available, you can get by with a long stick.

But if you want to achieve a special texture on the surface of the walls, then you may not need to dilute the paint. For textured patterns, a thick consistency is required.

Image
Image

Color definition

It is not necessary to immediately use the paint after thinning, it retains its properties for a long time. Before painting, you need to re-mix the composition, then you can apply it to the surface. Once you have achieved the desired consistency, decide on the shade of the walls that will fit the overall interior. There is a white water-based paint on the market, to which a color of the corresponding color is added. Depending on its amount, any shade is created.

Image
Image
Image
Image
Image
Image

How much paint is required

It is important to correctly calculate the paint consumption. This is one of the most important indicators, which is calculated in kilograms per square meter. This product characteristic is often indicated on the label itself, which is applied by the manufacturer. Since we are talking about water-based paint, the figure is an average. The actual material consumption depends on several factors. Much depends on whether you want to breed the material or not.

An important point is to create the optimal temperature for painting, which should not exceed twenty-five degrees Celsius.… The composition is applied in a thin layer, it is better to carry out the procedure several times. There is a break between this for a few hours.

Image
Image
Image
Image

Consumption depends on the choice of materials for application, because it can be a regular roller, spray and brush. The use of the composition per m2 depends on the type of product purchased. Follow the recommendations on the label, calculate the area to be trimmed.

Application methods

Thanks to water-based paint, you can create any veneering effect, which differs not only in structure, but even in shape. At the same time, the cost of the material is affordable, so the consumer often chooses just such a finishing option. You will need to mix the paint, fill the container with it for further work. The choice of application tools depends on the effect you want to achieve. You can use a wide brush that sinks into the paint. Make sure that the composition does not drain, dispose of excess.

Image
Image
Image
Image

How is cladding done

It is recommended to start painting the walls from above, to make short vertical and horizontal strokes. Each square meter is processed, while it must be remembered that the new area should overlap the previous one, and this should be done while the edge is still wet enough. The paint is applied sequentially, it is recommended to treat one wall completely before taking a break, so that the change in tone is not noticeable. The composition dries quickly, and before applying the next layer, it is enough to wait about two and a half hours to continue working.

Painting an old wall begins with surface treatment. You will need to remove greasy stains, which will help to deal with a soap solution.

You can whitewash the walls before painting if you want an even tone.

Image
Image
Image
Image

Differences between roller and spray gun application

The roller can be used if you want to quickly process the surface. In this case, you will need to make several layers, unlike a brush, since the tool applies paint thinly. The roller must be carried in different directions along the wall, it must be pressed evenly. It is important to be careful here, as the composition can be sprayed.

Skilled technicians use other tools as well. The paint can be applied with a spray gun, which has its own characteristics and advantages. Technology plays an important role, but thanks to such a tool, you can not only paint over drywall walls, but get rid of streaks. The use of a spray gun will significantly speed up the work process, reduce material consumption, and allow you to achieve high quality cladding. But finding a quality device is important, so seek professional advice.

Image
Image
Image
Image

Design options

The use of water-based paint can solve any lining problem. Thanks to this material, it is possible to create the desired effect in the interior, to achieve a structure that looks original. If you are interested in ideas or already have your own ideas, it is important to learn the intricacies of applying paint in order to get what you want.

If you just want to repaint the walls in a different color, add the color of the appropriate shade in the amount you need, and carry out the preparatory work, after which you will deal with the cladding.

Image
Image

Surface texture

Designer finishes include careful selection of not only colors, but also wall textures. When it comes to plasterboard products, this will not be a problem, since the material lends itself well to processing. To create patterns on the surface, you must use the templates and stencils previously prepared. You can combine different shades that look harmonious with each other. This option is often used to decorate children's rooms, as well as bedrooms, where you want to create a special atmosphere.

The living room is often done in colorful colors, but it all depends on the type of design that was chosen earlier. Pastel colors are very popular, which look not only soothing, but gentle and relaxed. If you're looking for a textured finish, start with a primer and other materials to achieve the desired effect. And only after that, the surface is painted with a water-based composition of the corresponding colors.

Image
Image
Image
Image
Image
Image

Walls look beautiful where several colors are combined; in such cases, designers resort to geometric surface design.

Correctly selected paint - high-quality result

You have the opportunity to make high-quality, but affordable repairs by choosing a water-based paint that meets the standards and qualities. Thanks to it, the desired effect is achieved, such a cladding is easy to care for, and it remains presentable for many years.

Image
Image
Image
Image

For information on how to paint walls with water-based paint, see the next video.

Recommended: