Mansard Roof (136 Photos): The Device Of The Roof Truss System Of Private Houses With An Attic, Types Of Roofs

Table of contents:

Mansard Roof (136 Photos): The Device Of The Roof Truss System Of Private Houses With An Attic, Types Of Roofs
Mansard Roof (136 Photos): The Device Of The Roof Truss System Of Private Houses With An Attic, Types Of Roofs

Video: Mansard Roof (136 Photos): The Device Of The Roof Truss System Of Private Houses With An Attic, Types Of Roofs

Отличия серверных жестких дисков от десктопных
Video: Design an Attic Roof Home with Dormers using SketchUp. Quick Overview and Animation 2023, January
Anonim

A house with an attic is noticeably different from any private and country houses. The attic allows you to save useful space, it is a functional element of a residential building. However, in order for the attic space to be such, one must know not only the design features of the roof, but also the layout of the attic as a whole.

Image
Image
Image
Image

Features of the

The attic is the top floor of a residential building. It is a mistake to call it an attic: there is a similarity in appearance, but the attic is a heated room. It is included in the relevant documentation, according to which it is a functional part of the dwelling, included in the total footage and has a specific purpose, which is subject to the supplied communications.

The main difference from the attic is the minimum wall height (1.5 m) strictly established by the regulations.

The mansard roof is both the roof and the walls of the upper floor. However, the roof can be different. Its design features determine the capacity, future purpose and comfort of location. All this is determined at the stage of designing houses at the time of choosing a place for a future structure.

Image
Image
Image
Image
Image
Image

As a ceiling and a wall, the mansard roof has window openings. They perform the function of lighting the interior space, which is not so important for the attic. For this reason, the roof has not one but several windows. Their presence and location are factors that make it difficult to finish, but necessary to create comfort.

The sizes of window openings are selected in each case individually. In most cases, this depends on the material for the construction of the attic roof.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

A distinctive feature of a properly constructed mansard roof is the reduced load on the foundation. For the construction of the attic, they usually try to use lightweight materials. This allows you to exclude subsidence of the entire house, as well as to build an attic in houses where it was not originally there. Due to modern technologies, it is not difficult to find the right raw materials.

The number of floors of the main building also matters. If there are two of them, then the construction of a complex shape with a mass of rafters and double-glazed windows pressing on the foundation is undesirable. In this case, you will have to think over a simpler version of the attic roof. It is also necessary to take into account the total number of beams so that their number, together with the rest of the structural elements, does not cause the house to sink.

Image
Image
Image
Image

What do you need to consider?

The calculation scheme is quite simple: it is important to take into account the useful and deaf area of ​​the attic. Useful space includes areas with a floor-to-ceiling distance of 1.2 m or more. Everything else is usually called a dead space, since it is impossible to comfortably sit in it. However, it is suitable for storing essential supplies such as small shelves, floor lamps, chairs, table and chest of drawers.

The attic allows you to minimize heat loss.

Image
Image

But so that the insulation and sheathing of the upper floor does not reduce the visual volume of the room, you have to think over the shape of the roof. All developments are brought into the project, indicating the dimensions of each plane. The shape of the roof is chosen from several varieties, taking into account:

  • required ceiling height parameter;
  • maximum user comfort;
  • type and material of the foundation of the house;
  • reliability of the structure being built;
  • durability and hygiene of the raw materials used for the roof;
Image
Image
Image
Image
  • the ability to connect communications;
  • backlight compatibility;
  • sufficient level of lighting;
  • convenience of ceiling cladding and wall decoration in the future;
  • lack of rigid frames for arranging furniture.
Image
Image
Image
Image

In addition, they try to take into account the openness of the layout. For example, in the case of an open interior space, support pillars or partitions are included in the design. The essence of drawing up is to disguise these outwardly unsightly attic components under the dignity and individuality of the structure. In addition, projects take into account the visual severity, correlating it with the footage of the structure being erected.

An important aspect is the location of the stairs leading to the attic. The entrance should be convenient for every household, it is unacceptable that this be reflected in the shape and location of the roof slopes. The design is carried out independently, using online programs or specialist advice. The designer can better suggest which version of the mansard roof will be optimal in a particular case.

Image
Image

At the same time, the customer has the opportunity to choose the functionality of the roof. For example, you can choose options to match the lighting in the space with natural daylight. In other cases, the project includes a veranda or balcony. If the customer wishes, a bay window ledge is designed. The latter option is distinguished by the presence of large windows, which will add light to the attic and make it visually lighter.

If you plan to install a fireplace, this also affects the shape of the roof and requires the purchase of refractory material for construction. Additionally, fire safety will have to be strengthened. Inside, you will need to think over the ventilation system.

If, according to its intended purpose, a part of the attic will be a sauna, it will be necessary to select building materials that are resistant to destruction from moisture and steam.

Image
Image
Image
Image

Types of structures

The mansard roof today has a strict classification according to the shape of the roof. The varieties have their own names and characteristics. A unique property of such a roof is the fact that it can have several levels. Consider the main nuances of mansard roofs.

Single slope

A pitched roof is not the best option. It is a roof with one slope of an inclined shape and looks like half of the roof. This form significantly hides the usable area, makes the room uncomfortable, and limits the arrangement of furniture.

In this case, the angle of inclination of the roof must not be allowed to be small (less than 45 degrees). In most cases, such an attic is not easy to regulate by law, due to the lack of height of the walls and ceiling. This construction option is the cheapest in comparison with other types. With a greater length of the base, in addition to the rafter leg, in such systems, you have to use a bed.

Image
Image
Image
Image
Image
Image
Image
Image

Gable

These options use the interior space more rationally. However, they are sometimes not sufficient for the maximum comfort of household members or their guests. This is due to the steepness of the roof and, as a result, the minimum height of the walls for effective use. Such buildings limit freedom of movement around the attic., require a thorough approach to the height of the walls, which is often hampered by a small base area.

Gable or gable roofs can be symmetrical (the ridge is located above the center of the structure) and asymmetric (the ridge is displaced relative to the center of the base). This space is often trapezoidal or even square. The corners are used for pantries. This category includes the "one and a half floor" variety.

Image
Image
Image
Image
Image
Image
Image
Image

Broken lines

These rafter systems (roof shapes) are a kind of gable counterparts. Their difference is an increase in the number of rays. In such designs, as a rule, there are 4 of them.Externally, each of the two slopes is divided into two parts, located at a certain angle. At the same time, the upper symmetrical slopes are shorter, the lower overhangs are more elongated.

The flat top of such a roof reduces the cost of purchasing roofing material. Part of the rafters during the construction of an attic roof is often carried out beyond the surface of the wall.

Such structures are the best options for a mansard roof, they are highly appreciated by professional craftsmen and designers.

Image
Image
Image
Image
Image
Image
Image
Image

Hip

Such roofs are hipped roof structures. The classic hip variety is nothing more than 4 slopes (2 symmetrical each). These systems are most resistant to strong gusty winds, since the wind load does not put enough pressure on the slopes. Outwardly, such designs are more attractive compared to other analogues.

Inside such spaces, households and guests are provided with the maximum level of comfort. The ceiling of the hip structures is higher, but the construction of such a system will cost more than previous analogs. In some cases, the slopes serve as walls, in others, the building has gables. This nuance allows you to install ordinary windows (not roofing) in the attic roof.

Image
Image
Image
Image
Image
Image
Image
Image

Half-hip

Such mansard roofs are modifications of the hip counterparts. Their construction is complex. Externally, the half-hip design always has 4 slopes. However, due to the fact that 2 of them can be partial, it is called gable. The main wall of the house with small windows can be located under the small slopes of a gentle shape.

The construction of such buildings is quite complex, since you have to think through every nuance of the rafter system, load-bearing walls and the reliability of the foundation. Sometimes, in addition to simple slopes, the fracture system is supplemented with gables with windows. In this case, the pediment can often have several slopes, repeating the hip base of the roof. Sometimes these options are combined roofs. For example, a half-hip structure can be broken.

Image
Image
Image
Image
Image
Image
Image
Image

Mansard Roof Pie

The structure of the mansard roof really resembles a layer cake. Moreover, the layers have all the slopes, even if the shape of the roof is broken. Finishing immediately appears to the eyes of the layman. This is the final or finishing material, which, in addition to its main function, is also a roof decoration. As a finishing layer, metal tiles, ondulin or slate are usually used.

Under this material is a roofing film. It is designed to protect the heat-insulating material from adverse factors. In the arrangement of the attic roof, different types of auxiliary coatings can be used for this purpose. It all depends on the available budget and individual preferences.

Image
Image
Image
Image
Image
Image
Image
Image

To insulate the attic from moisture, ordinary plastic wrap is used.

The lathing and rafter system form the frame of the mansard roof. They are made today mainly from solid wood. The rafters provide an even distribution of the weight load of the roof from the slopes to the walls. Thermal insulation is a must-have for the attic pie. Without proper insulation, the space will not be habitable.

Usually, for these purposes, materials are selected with the best energy-saving characteristics and durability (for example, mineral wool). However, the material should not be harmful and expensive. Ventilation is imperative. Its installation will eliminate the formation of condensate during the operation of the attic. Due to it, it will be possible to protect the entire structure of the attic roof and extend its service life, eliminating premature repairs.

Image
Image
Image
Image

Training

Preparatory work before starting the construction of a mansard roof involves taking into account a number of aspects.In addition to calculating the amount of raw materials required for the construction and insulation of the building, markings are performed on the drawings, indicating each nuance.

Total area

Before erecting the desired structure, the total area of ​​the attic roof is calculated. This requires a plan. The calculation is done as follows:

  • divide the internal space into several geometric shapes (depending on the complexity of the design);
  • find the area of ​​each figure;
  • the results obtained are summarized.
Image
Image

Slope of the slopes

In addition to the nuances of thermal insulation and the order of the arrangement of window openings, it is necessary to think over the angle of inclination of the roof slope. This factor is especially important: if the slope of the roof slope exceeds the maximum allowable value, this will lead to a decrease in the inner area of ​​the attic space. Pay attention to the photo, which clearly demonstrates the permissible indicators, taking into account the material used for the construction. Values ​​are shown as percentages, for better understanding, ratios are shown.

Often, the angle of inclination is subject to the weather conditions of a particular region. If we consider a structure with a broken perspective of 4 slopes, the angle of the lower slopes in relation to the floor is 60 degrees. In this case, the upper ones at the base will be located at an angle of 30 degrees. The preparation also calculates the load of the slopes from precipitation, including snow and wind, so the steeper the slope, the stronger the wind load.

For this reason, sometimes the structure has a flatter roof.

Image
Image
Image
Image
Image
Image

Window installation rules

According to SNiP, the area of ​​the window opening should not be less than 10% in relation to the floor surface. If the attic roof will cover the space in several rooms, at least one window should be made in each of them. The inclined technology of installing windows is somewhat more complicated than the usual one, as is the installation of windows on the ceiling. What matters is the distance from the floor at which window openings can be placed.

Image
Image
Image
Image

The dimensions of the windows directly depend on the height of the attic roof. They try to arrange them in such a way as to illuminate most of the space. For example, to illuminate a small area with a low ceiling, parameters 78x118 cm are located at a height of 100 m from the floor. However, such lighting cannot be called sufficient, since when the corner is illuminated, it does not always fill the main part of the room with light.

If the same window is placed at a distance of 120 - 150 cm, the corner will be less illuminated, but the main stream of light will be directed to the center of the room. To achieve maximum illumination, it is better to choose a larger window size (for example, 78x160 cm) and position it at a height of 120 cm from the floor and almost to the top of the roof (230 cm). An important nuance is taken into account when preparing: the steeper the configuration of the broken attic roof, the wider and higher the window should be positioned. At the same time, the destruction of the rafter system is excluded.

Image
Image
Image
Image

Rafter system and types of windows

More often, the construction of a private house with an attic roof is performed with a broken roof structure. This is due to the increase in usable area. However, as the shape becomes more complex, the dependence of the reliability of the attic roof on the materials used increases. This is reflected in the windows, which can be not only classic inclined in the plane, but also vertical:

  • with a ledge above the roof (dormer);
  • the end of the attic;
  • recessed into the attic room.
Image
Image
Image
Image
Image
Image
Image
Image

Usually, an inclined technology is chosen for a small attic. It affects the interior arrangement most sparingly, gives more light. Other types of installation are more difficult to perform, due to them, the interior often creates a feeling of overloading the interior.

When marking, take into account the angle of inclination of the slope: the steeper it is in relation to the floor, the lower the height of the window can be. Its width should be several cm less than the step between the beams.

Image
Image
Image
Image

This makes installation easier and eliminates the need for reinforced beams.

Before installation, you should carefully consider the rafter system. With the same base width, with an increase in the number of slopes, the useful area of ​​the internal space becomes larger. Despite the fact that the rafter system becomes more complicated at the same time, it does not lose its relevance to the customer. A notable nuance of this solution is the possibility of lower overhangs.

At the same time, sharply inclined overhangs perform the function of protecting the top of the wall from adverse weather factors. In addition, due to them, it is possible to divert moisture further from the foundation. However, the preparatory stage must take into account the fact that they are able to increase windage. This makes the use of especially strong boards and beams in construction.

Image
Image
Image
Image

Lighting

Lighting is thought over at the preparatory stage, designing a traditional or built-in type. The design of the ceiling design depends on the method. To comply with all safety requirements, modern LED light sources are used today. Their shape can be any (in the form of panels, built-in soffits, spots with an adjustment system, as well as a cord and flexible tape).

These light sources are very powerful, they do not emit toxic substances into the air during operation, are resistant to voltage surges and do not heat up. However, they shine with directional light, which does not allow illuminating every corner of the attic roof from the inside. For this reason more often the attic ceiling is equipped with spot lightinglocated at equal distances around the perimeter. Often in the attic space, you can see several chandeliers, as well as composite lighting, consisting of a central and auxiliary elements.

Image
Image
Image
Image
Image
Image
Image
Image

How to do it yourself?

Consider a step-by-step technology for manufacturing a mansard roof for a one-story house. The construction of the rafter system has 2 types:

  • with hanging beams;
  • with inclined.

The second options require the construction of additional supports. More often, both are used in the construction of an attic roof. Therefore, hanging rafter beams are prepared for the upper slopes, and inclined for the dock edges.

The subtleties of all nodes must be checked according to the drawings.

Image
Image

Calculation of the rafter leg

The first step is to calculate the rafters. The step between the beams should vary between 60–80 cm. You can use whole or glued beams with a width of 15–18 cm or more (the longer the length, the wider). The thickness is usually at least 5 cm. The requirements must be observed, since this is important for laying insulation.

Image
Image
Image
Image

Mauerlat installation

Mauerlat is nothing more than a timber strapping on top of the base. Its task is to provide conditions for firmly fixing the bottom of the rafters to the base. It distributes the weight pressure from the roof to the walls. It is attached to the base by means of anchor bolts, studs or reinforcement, fixing it to the base of the load-bearing floors. Use a wooden dowel.

In order to prevent the destruction of the Mauerlat, waterproofing is performed (they put roofing material). The bars are treated with an antiseptic impregnation.

Image
Image
Image
Image

Roof frame construction

The beams are placed on the Mauerlat. On the ground, they form slopes in a sea of ​​triangles. If you need to make a gable roof, initially fix the frame in the form of the letter "P". After that, hanging, and then inclined rafters are attached directly to it. Sloped beams are used for the side faces.

Then the rafter legs are filed and attached to the Mauerlat using nails or metal staples (movable type of fixation). The saw is carried out with maximum accuracy. It should ensure the most snug fit of the rafter leg to the Mauerlat. The rafters are installed with an equal pitch, otherwise the weight pressure on the base will be uneven.

Image
Image
Image
Image

To achieve horizontal during installation, a rope is pulled between the extreme rafters. When all the beams are installed, they are connected to each other, constructing a crate. The places reserved for the skylights are reinforced with a perpendicular beam. This will exclude deformation of the windows in the future.

If the roof has a large width, a ridge beam is installed. This element will be another support. It will allow you to redistribute the weight load. If the attic roof is long, it is provided with a support.

Image
Image
Image
Image

Waterproofing

At this stage, a film of a waterproof barrier is attached to the crate. Correct implementation implies overlapping of the material. So that this procedure is not in doubt, you can buy waterproofing from manufacturers indicating the joining points with strips of bright color.

Fasten the waterproofing film with a construction stapler.

Image
Image

Insulation and vapor barrier

Usually, the insulation is placed under the waterproofing film. At the same time, materials with good flexibility are used, capable of filling any gaps and existing voids. A vapor barrier film is necessary to protect the roofing material from condensation and steam that penetrates from the inside. The foil is laid to provide the correct size for the gaps. In this case, the distance between the roofing and insulation materials is subject to their class.

Image
Image

Installation of windows and topcoats

According to the technology, the windows are installed before the roof finishing works. When installing them, make sure that their design provides for opening. This will allow the attic to be ventilated.

The last stage of installation is the roof sheathing with roofing material. Its choice directly depends on the configuration of the roof, taste preferences and the available budget. However, it is important to follow the rule here: raw materials with sufficient rigidity are applicable for linear type skates.

Image
Image

Fasteners for extensions

After that, it remains to install additional elements. Each of them has its own purpose. For example, a ridge is placed on top of the slopes in order to prevent water from entering between them. In order to provide protection for the docking points where water can flow, an inner corner bar is attached. The outer strip is attached for aesthetic appeal and as a reinforcement of joint protection.

Image
Image
Image
Image

Types of materials

For the construction of a mansard roof, the following raw materials are used:

  • For rafters, you can use pine or glued timber.
  • To cut the overlays you will need a metal sheet 1 mm thick.
  • Mauerlat will be reliable if used for its construction pine or larch.
  • The structure is being erected from foam block or an analogue with a honeycomb texture.
Image
Image
Image
Image
Image
Image
  • The best type of raw material for roof insulation is mineral and basalt wool… In addition to it, fiberboard plates, polystyrene foam, expanded polystyrene and glass wool are used.
  • For roofing with roofing raw materials, use metal roofing, corrugated board, seam roofing, polymer-sand, bituminous and natural ceramic tiles, turf and slate, reeds.
  • For interior surface finishing use decorative stone, lining, wallpaper, paint.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Design and layout

The layout of the attic can be different. The main factor that determines its capabilities inside is the shape of the roof. The type, quantity and size of furniture, the convenience of location, the atmosphere of comfort and the regularity of using the attic depend on it. Depending on the available usable area and division or open plan in the attic, you can arrange:

  • one living room and balcony;
  • living room combined with a bay window;
  • two bedrooms;
Image
Image
Image
Image
  • bedroom and living room;
  • bedroom, living room, kitchen and bathroom;
  • billiard room and recreation room;
  • a gym and a guest room;
Image
Image
Image
Image
  • living room combined with a dining area;
  • children's room and parents' room;
  • study and recreation room;
  • home library and living room.
Image
Image
Image
Image

There are many planning options. All of them involve creating a cozy environment, which complicates the slope of the slopes. To visually remove this discomfort, they try to fill the places near the walls with trifles. Failure to use blind areas visually introduces an imbalance into the interior. Every corner of the attic should look habitable. There are a number of basic techniques for the interior arrangement of the attic space, taking into account the purpose of individual rooms.

Image
Image
Image
Image
Image
Image

Living room

If the roof has a difficult perspective, it should be leveled with light colored finishes. The living room implies comfort, warmth and the creation of an atmosphere of a home, therefore, warm colors are needed in it. It is undesirable to overload the interior with an abundance of upholstered furniture. If there is not enough space, you can put a small compact sofa and a couple of armchairs.

We must not forget about functionality: the sofa should have a convenient transformation mechanism. This will allow, if necessary, to arrange guests for the night. To create a welcoming atmosphere, you will need a small table, glass models will make the interior light. The sofa must be selected so that the back and seat are comfortable and do not create additional stress on the spine.

Image
Image
Image
Image
Image
Image

Bedroom

It is not difficult to equip an attic under a bedroom, even if the perspective of the roof has a lot of kinks. Tones are selected soft and light. The type of surface coating is preferable matt: gloss creates a certain emotional tension.

Dynamic drawings with large patterns are excluded: they visually break an already difficult space.

Image
Image
Image
Image

When choosing furniture, you should give preference to simple beds without carved elements. The bed may have a small headboard. The best accessories would be bedside tables. They are distinguished by minimalistic forms with sufficient functionality.

In such rooms, built-in or near-surface lighting is preferable. It is better to replace chandeliers with spotlights or several wall sconces.

Image
Image
Image
Image

Children

When equipping an attic space for a children's room, special attention is paid to safety. Complex roof systems are excluded, space and freedom of movement are important. The space is divided into 3 functional areas, delimiting them by means of a soft carpet or ceiling structure. Depending on age, this is a playroom (recreation area), a work area and a sleeping space.

There should not be a lot of furniture, while the obligatory set includes a bed, a desk, a cabinet, a rack or a small wardrobe. Each functional area should have its own lighting in addition to central lighting. Contrasting inserts of bright shades are allowed, but no frills. For the walls, choose wallpaper, one of the walls can be marked with a poster. If you wish, you can equip a small audio zone.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Kitchen and dining room

This purpose of the attic room implies the presence of a ventilation system. Do not overload the room with bulky furniture. It is better if these are built-in wall cabinets, perhaps bar counters or narrow tables and chairs. If the space is limited, a linear arrangement of furniture is performed.

The priority is to use the white color of the ceiling and combine it with fresh, dynamic tones (green, mint, orange). Furniture is selected compact, if possible with streamlined edges, in order to eliminate the risk of injury to household members or guests. The upper overlap is decorated with a stretch film or painted. Particular attention is paid to lighting, supplying the ceiling structure with a mass of lamps.

Image
Image
Image
Image
Image
Image
Image
Image

Other solutions

In addition to classic solutions, when planning the attic for other types of rooms, its furniture also changes. For example, for a study in the attic, a desk is installed, the necessary equipment is installed. In order to save space, lamps are built above the table.

If, due to the shape of the rays, they hit in the eyes, wall sconces are mounted instead.

An obligatory attribute of a study is a bookcase. To minimize the accumulation of dust on books, a closed model is placed in the room. The arrangement of the home library is similar. However, it is desirable to create more comfortable conditions here. To do this, you can put a comfortable sofa or chair in the room.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Stylistics

In most cases, the attic space can be designed in any interior style. If you approach the process of creating a cozy atmosphere creatively, you get an unexpected but harmonious option. At the same time, you can create an interior in classic, modern, vintage and ethnic design directions. The only obstacle is the presence of beams, however, they can also be beaten by hiding them with a simple suspended structure.

Gable and gable roofs with classic windows allow you to decorate the ceiling with a stretch film in a plasterboard box. With their help, it is possible to introduce geometric shapes and symmetry into the interior, which is necessary for the classics, neoclassicism and classicism. If you depict an imitation of plaster stucco molding on the ceiling, and choose a sofa and armchairs in light colors with gilded trim from the furniture, you get an interior in a classic style… For more ambiance, you can decorate the ceiling with a simple baguette.

Image
Image

If you need rustic theme in the spirit of Provence style, you can paint the walls with water-based paint in white or ivory. Such a solution for a wooden floor will allow you to change its aesthetic perception, making it lightweight. Chandeliers are needed here with a simple shape and small size. The shape of the roof can be gable, hip and broken.

Image
Image

Demonstration of some roughness of surfaces is important for creativity. The presence of beams, communication systems is only welcome. They are matched with similar extraordinary lamps (for example, in the form of a fan). There is no need to make a complex ceiling decor here.

The hallmark of the loft and grunge trends is deliberate wilderness. Coziness is created by means of a fireplace, expensive branded furniture and extraordinary accessories.

Image
Image

Ethnic destinations require space. Extra details are not needed here, both on the ceiling and in the setting. Their number is minimized.

The priority is the light, which is achieved through white paint, stretch film, sometimes wallpaper, and drywall.

Image
Image

The dimensions of the recessed luminaires should not be large: this visually makes the room smaller. Each piece of furniture and accessory used carries its own story and has a special meaning, indicating the concept of the chosen style.

Image
Image
Image
Image
Image
Image

Advice

So that the attic really was a decoration of a country house, you can take into account several recommendations of experts:

  • A mistake in the design of the internal and often external design is the use of an identical texture of the material. When there is a lot of one finishing raw material, it loses its expressiveness.
  • Buy quality raw materials for the construction of a mansard roof. It will help to increase the life of the roof as a whole.
  • Do not skimp on the raw materials of the rafter system and insulation. The design must be reliable, because the operation of the attic will be daily.
  • When constructing an attic space, take care of additional insulation. In addition to the roof, insulate the floor. Many modern materials are compatible with the "warm floor" system.
Image
Image
Image
Image
  • If you plan to use a fireplace in the attic, it is better to buy an electric imitation with a sound function. It weighs less and is safer to use.
  • Do not weigh down the roof with multi-level structures made of plasterboard and stretch canvas. Suspensions and a metal frame, gypsum board sheets, sometimes plastic or wooden cassettes will give an additional weight load on the load-bearing walls.
  • If the main building is designed for a garage, do not build balconies next to it. The smell of gasoline will penetrate through the open windows into the space of the entire attic floor.
Image
Image
Image
Image

Beautiful examples

We bring to your attention beautiful examples of a photo gallery. They will help you get inspired to create an attic structure, bringing to life the most unusual design solutions.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

For information on how to insulate a mansard roof, see the next video.

Popular by topic