Lining With Imitation Of Timber (25 Photos): Board For Interior Decoration, Design Of A Small Room, Upholstered With Timber

Table of contents:

Lining With Imitation Of Timber (25 Photos): Board For Interior Decoration, Design Of A Small Room, Upholstered With Timber
Lining With Imitation Of Timber (25 Photos): Board For Interior Decoration, Design Of A Small Room, Upholstered With Timber

Video: Lining With Imitation Of Timber (25 Photos): Board For Interior Decoration, Design Of A Small Room, Upholstered With Timber

Video: Lining With Imitation Of Timber (25 Photos): Board For Interior Decoration, Design Of A Small Room, Upholstered With Timber
Video: 10 Small Living Room Makeover Ideas 2024, March
Anonim

Wood is one of the most popular building and finishing materials. However, not everyone can afford to build a house from expensive natural timber. Alternatively, you can use lining for a bar for wall decoration. Such material will not hit the budget hard and will look no less aesthetically pleasing. The advantages and disadvantages of lining with imitation of a bar will be considered in more detail in this article.

Image
Image
Image
Image
Image
Image

Features of the

Lining is a board of small thickness, which are used for interior and exterior decoration of premises. The panels are connected to each other using spikes and grooves.

Material with imitation of a bar differs from other types of lining in the following parameters:

  • The thickness of the panels for the timber is greater than that of the classic lining (up to 1.6 centimeters) and can range from 1.6 to 3.7 centimeters. Thanks to these parameters, the finish is visually similar to a natural wooden beam.
  • For a high-quality imitation of timber, the width of the panels is at least 11 centimeters.
  • Installation of the material under the timber can be done only in the horizontal plane, when, like an ordinary lining, you can also fasten it vertically and diagonally.
  • Boards with imitation of a bar have special grooves on the side, which is necessary for ventilation.
  • The surface of the wall covered with timber panels is more embossed.
Image
Image
Image
Image
Image
Image

Scope of application

This material is used for interior and exterior decoration of private houses or baths. It is possible to sheathe not only walls, but also ceilings with clapboard under the timber. In this case, the base material is not important, the main thing is that there are no strong irregularities on the surface.

Panels with imitation of a bar not only ennoble the appearance of the room, but also create a favorable microclimateas they are made of environmentally friendly materials. For interior wall decoration, it is best to use wide panels (130-150 millimeters), which will visually increase the area of a small room.

For exterior decoration, thicker and wider (200 millimeters) boards are used, which allows you to create the effect of a house made of natural timber. Before proceeding with the installation, you need to take care of sound and heat insulation.

Image
Image
Image
Image
Image
Image

Advantages and disadvantages

Like all finishing materials, lining under the timber has its own advantages and disadvantages.

Let's consider the main advantages of such panels:

  • Aesthetic appearance. The material will fit perfectly into almost any room interior design.
  • Resistant to deformation. The panels are made of materials that are durable and resistant to mechanical stress.
  • High resistance to decay. Larch boards can be used even in rooms with high humidity levels.
  • Environmental friendliness. The panels are made only of good quality natural wood.
  • Low cost compared to natural timber.
  • Suitable for almost all types of walls and ceilings.
  • Ease of installation.
  • Long service life, which is about 25 years, if the panels are not treated with additional agents against microorganisms and mold. Treating the boards with special compounds will only increase their service life.
  • Provides sound and heat insulation. However, you should not use such panels as the main thermal insulation material.
Image
Image
Image
Image
Image
Image

Despite the significant advantages, the material has several disadvantages. For the most part, the disadvantages are due to the characteristics of the type of wood that was used to make the lining.

The main disadvantages of panels for timber include the following:

  • Some types of wood from which the lining is made do not belong to fireproof materials. Such products must be treated with special compounds.
  • The choice of material for external decoration must be approached with special care. The wood must be resistant to atmospheric precipitation and not fade from exposure to direct sunlight.
  • Not all the wood from which the lining is made for the timber is distinguished by good resistance to rotting and fungal formations. For this reason, it is recommended to treat the material annually with special compounds with an antiseptic.
Image
Image
Image
Image
Image
Image

Views

Lining for timber has many varieties, which differ not only in size, but also in quality. The quality primarily depends on the material used to make the panels.

Lining for timber is divided into three main classes:

  • "A" - this class includes boards of the highest quality. There are no defects on the surface of such panels.
  • "B" - there are minor defects on the surface of the lining of this group. In appearance, such materials are inferior to class "A" panels, but they are much lower.
  • "C" is the most budget-friendly option for timber panels. The material is not of the best quality, on the surface of which there are defects. Often, such panels need additional polishing.
Image
Image
Image
Image
Image
Image

Material

The cost and some characteristics will depend on the material that was used to make the lining under the timber.

For the production of such panels, the following types of wood are most often used:

  • Pine;
  • spruce;
  • cedar;
  • larch.

Pine and spruce are highly resistant to decay. In addition, such wood has a wonderful resinous smell. Compared to pine, spruce is not as strong and resistant to external negative factors.

Image
Image
Image
Image

Cedar can be called both durable and soft material. Such wood has antiseptic properties and cleans the air from bacteria. Cedar lining has a light shade and a beautiful texture. Since the material belongs to conifers and contains a lot of resin, it has good resistance to putrefactive processes.

Panels and larch trees are great not only for decorating a house, but also for baths. Such wood is considered a fireproof material: the panels do not heat up under the influence of high temperatures and cannot be burned on them.

Also, larch is resistant to high levels of moisture, so it does not swell, is not subject to deformation and decay. Another significant advantage of this material is its high strength.

Image
Image
Image
Image

The size

As noted earlier, the panels for the timber have more impressive dimensions than the classic lining. The boards can be up to six meters long. The width of such products varies from 6.5 to 20 centimeters. On the construction market, you can also find products with a width of 25 centimeters, but since the demand for such panels is small and the price is quite high, you can rarely find them.

As for the thickness of the panels, the most common options are between 1.8 and 3.4 centimeters. The quality and strength of the finish largely depends on the thickness. Some firms can make custom-made lining according to individual parameters.

Image
Image
Image
Image

Selection recommendations

When choosing, first of all, you need to focus on the type of finish. If the panels are to be used for the facade of a building, special attention should be paid to the quality of the wood and the dimensions. The material must be resistant to the negative influences of the external environment. As for the parameters of the boards, wider and thicker panels are best suited for external decoration.

For interior decoration, you can use less expensive and thin lining. In this case, the main criterion when choosing a material will not be its resistance to external influences, but its aesthetic appearance. The only exceptions are rooms with high humidity levels.

Installation tips are in the next video.

Recommended: