Lining Dimensions: Standard Width And Thickness - Table, Products With Parameters 16 Mm And 6 Meters, Standard Board Length

Table of contents:

Lining Dimensions: Standard Width And Thickness - Table, Products With Parameters 16 Mm And 6 Meters, Standard Board Length
Lining Dimensions: Standard Width And Thickness - Table, Products With Parameters 16 Mm And 6 Meters, Standard Board Length

Video: Lining Dimensions: Standard Width And Thickness - Table, Products With Parameters 16 Mm And 6 Meters, Standard Board Length

Video: Lining Dimensions: Standard Width And Thickness - Table, Products With Parameters 16 Mm And 6 Meters, Standard Board Length
Video: Standard Kitchen measurements.. 2024, March
Anonim

Lining is a thin cut of natural wood. Installation of the panels is simple and the surface is beautiful. The standard thickness of these products ranges from 12 to 20 mm. These values are enough to prevent the board from breaking or squeezing during installation. Size is also important when calculating the required volumes. Many are interested in the question - are there standard lining sizes. It is worth studying the features of various types in more detail.

Image
Image
Image
Image
Image
Image

Features of the

The main dimensions of wood bases are regulated by standardization corresponding to GOST 8242-88 for profile parts made of wood for construction and 8486-86 for sawn softwood. There is also a European parameter for industry - DIN 68126/86. There are no strict regulations on the length of the lining. Products are on sale from 2 to 6 meters. Buyers buy goods that are more convenient to transport. There are also no strict parameters in width, so it varies from 13 to 120 mm.

The standard allows a deviation of the size range by no more than 1 mm, and the deviation from straightness is no more than 3 mm per 1 running meter of length.

Image
Image

The main features of the lining are its length and width. These indicators are taken as a guideline when calculating the number of products. Regardless of the dimensions, the laying of any boards is carried out according to the same principle. It is convenient for the consumer. Since, for example, if it is necessary to replace or repair it, it will not be difficult to find a similar part of the required size and with an identical fixing method.

To avoid any difficulties during installation, it is important to study the instructions supplied for a specific type of product. Usually it is in the package with the product. Differences may be present if the lining is of European or domestic production. The differences are just in the typical sizes of the varieties. Domestic lining of the first, second or third grade does not correspond to the typical dimensions of European-made products of class A, B, C. Coincidence in dimensions can only be in products of the "elite" class. However, there is a difference here, since European-made products are usually more expensive in value.

Image
Image

By the way, the cost of the lining is very dependent on the size. In terms of length, shorter boards tend to be cheaper. Long planks are more expensive, as the blanks are usually needed for filing the overhangs and should not contain dead knots. If at the processing stage there are dead knots in the long board, then they are cut off and products of the same harvested type, but shorter, are obtained. If dead knots remain, they will fall out of the finished products at any time, resulting in a marriage in decoration.

Experts also distinguish between live knots. They will not fall out when using the board, therefore, in some grade categories, they are allowed to be left. Lining with live knots is suitable for interior wall decoration. Inexpensive varieties are usually used for baths, hallways, and other similar premises, where a particularly sophisticated finish is not required. With proper processing, the lining of exquisite varieties can turn into a designer decor, so it is worth considering varietal types in more detail.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Views

In the manufacture of lining from wood, various types of wood are used.

The traditional types include the following:

  • pine;
  • aspen;
  • lime;
Image
Image
Image
Image
Image
Image
  • alder;
  • deciduous;
  • cedar.
Image
Image
Image
Image
Image
Image

Among the exotic species, the following are worth highlighting:

  • abashi;
  • ivory;
  • iroko;
  • hemlock.
Image
Image
Image
Image
Image
Image
Image
Image

If we take a separate type of pine lining, then its technical parameters and classification will differ significantly even for one type of product. Differences in moisture content, type and class of boards have implications for their cost. Everyone chooses those materials that will best suit the tasks. For example, the moisture level is an essential technical parameter, the indicators of which differ due to the fact that the lining is of natural moisture, it is also called raw. And also the material is processed in special dryers.

Processing in special dryers is carried out according to strict rules, since the quality of the products depends on this. The percentage of water in the treated lining is small or completely absent. By the way, if you choose exactly pine lining, then it should be borne in mind that the natural percentage of moisture in these products is low. If the panel is dried, it will be slightly lighter, but more expensive. This is due to the fact that wet pine is difficult to dress.

Image
Image
Image
Image

Moisture affects the grade, for example, a standard clapboard is a planed board that is made from undried wood. The cost of this variety is affordable, so it is very common. However, the material is used not as a decoration, but as a technical means, for example, to form a frame. The thickness of products for these purposes is the most suitable - 15 mm. Pine Euro lining has the western standard DIN 68126, it differs from the domestic one with a locking system of fixation. The products also have special grooves from the inside, which contribute to the removal of moisture. The moisture content of the products is 12-16 percent, and the thickness of the panels is 16 mm.

The calm option is a planed board, dried, with chamfers along the longitudinal side. The products do not provide grooves, but they are usually wider than European options, since they have dimensions of 145 mm. Standard European calm is sold with a width of 90 mm. Wide panels shorten assembly times, however assembly of parts is considered difficult. For ease of use, it is best to mount them horizontally.

Image
Image
Image
Image

Aspen lining is durable, tough, usually light-colored. At the same time, the initial color of the material does not change over time, as well as from external factors. In comparison with other products, aspen options are more expensive, which is explained by the fact that there is very little knot-free wood used to make the material. The raw material is extremely valuable, the natural moisture content of the aspen is high. Often, when drying products, this factor is not taken into account, which leads to warping, cracking and a change in the geometry of the forms.

However, aspen is good as a finishing material, as it is easy to process. Due to the high humidity, the products have good moisture resistance. In many respects, the products are close to linden.

However, aspen has the best performance. Fastening of aspen lining is allowed vertical or diagonal.

Image
Image
Image
Image
Image
Image

Alder lining is inexpensive and looks beautiful. She definitely goes through the drying procedure. After processing, the final moisture content is about 12%. Often, during operation, this type of product warps and cracks. In order for the finish to remain beautiful over time, you should initially choose options with a wide tongue.

This will prevent the formation of cracks during shrinkage. The thickness of the products is about 12.5 mm, and the width varies and significantly - from 60 to 160 mm. Any of the options can be used for decoration. Experts advise choosing a wide alder lining. And, in general, aspen lining is good for finishing steam rooms and washing rooms in baths, since it does not absorb moisture at all.

Image
Image
Image
Image

Cedar lining, like other types, is processed in drying chambers. This option is considered durable, therefore it is often used as an exterior cladding of a house. Like any coniferous lining, this type is very expensive, therefore it is rarely used for its intended purpose. Lining made of exotic woods is not often found on the market. These products are expensive in terms of cost; it is unlikely that it will be possible to buy it cheaply. The characteristics of exotic wood are similar to the usual species, so when choosing it is worth thinking about and calculating the benefits more precisely from such an acquisition.

Knowledge of the exact dimensions of the varieties of lining will help in the calculations.

Image
Image

Dimensions (edit)

It is more convenient to present the prices, as well as the dimensions of the thickness, width of the Angara pine and spruce standard, the table will help:

Pine

Aspen

Deciduous

Olkhovaya

Linden

Cedar

Thickness

12.5 mm 12.5 mm 16 mm 12.5 mm 12.5 mm 12.5 mm

Width

from 50 to 108 mm 88 mm 88 mm from 76 to 200 mm from 80 to 125 mm from 88 to 140 mm

Length

from 0.5 to 3 m from 1 to 3 m from 1 to 3 m from 0.2 to 6 m from 1 to 6 m from 2 to 4 m

Price

from 270 to 710 rubles per package (10 pcs.) from 390 to 750 rubles per package (10 pcs.) from 400 to 800 rubles per package (10 pcs.) from 420 to 900 rubles per package (10 pcs.) from 650 to 1000 rubles per package (10 pcs.) from 780 to 1000 rubles per package (10 pcs.)

The cost varies depending on the size, as well as on the grade of the product.

For example, variants of the same type, but belonging to the extra class, usually differ in price by an average of 8-10%. Lining, quality lower than grades B or C, will be cheaper in comparison with extra or A class. The length of the products also affects the cost. For example, the lining of the minimum length of each type is about 50% cheaper than the products of the maximum length, and also the working width of the board is usually less. The table below takes into account the operating parameters. Manufacturers often indicate the measured width, which is approximately 96–98 mm. Measured values are not suitable for calculating the amount of finishing material.

Image
Image
Image
Image

Tips & Tricks

The calculation of the number of lining should be started, knowing the length, width, height of the room in which the finishing will be carried out. The product of the width and height will give the square meters of the area to be trimmed. This rule is valid if the trimmed area of the usable area is of the correct shape. If this is not the case, you will have to calculate the parameters of individual sections, and then summarize the indicators. To calculate the number of lining, you need to multiply the parameters of indicators that relate to the room with the parameters of the thickness of the lining. If you need to find out how many pieces of panels are in one cube, you will have to multiply the length, width and thickness of the selected products. It is desirable to increase the obtained values by 10–15%, since the use of trim parts is impossible without residues. The increased result is useful for unforeseen situations.

For example, it is known that the length, width and thickness of one pine panel is equal to the following values: 125x50x2000 = 12,500,000. This value is in millimeters, but cubic meters are needed, so you need to translate: 0.125x0.050x2 = 0.0125 m³. To calculate the number of boards in a cube, you need to divide 1 by the resulting value: 1 / 0.0125 = 80. It turns out 80 whole lining panels. If a fractional number came out in the calculations, it must be increased to the nearest integer value.

Image
Image
Image
Image

To calculate the number of square meters in a cube, the area of one workpiece should be taken into account. To do this, you need to multiply the known section parameters: 0.125x2 = 0.25 m². It is known that there are 80 boards in a cube, which means 0.25x80 = 20 m² in one cube. To find out how much material is required to cover a room, for example, 5x5 meters, its total area must be divided by the area of one panel. It turns out that for the described example you need 5x5 = 25 / 0.25 = 100. For a room equal to 25 m², you need 100 pieces of pine lining of a standard size. If we take into account the price for a package of 10 pieces from 270 to 710 rubles, then the costs for the entire volume of material will be from 2,700 to 7,100 rubles.

You also need to take into account the cost of additional elements, for example, corners, baseboards, and so on. Decorating the room will be quite economical, but nevertheless beautiful and durable.

Image
Image
Image
Image

Beautiful examples

Wooden lining looks organic in combination with other finishing materials, as well as with household items

Image
Image

Modern designers are successfully using lining in various styles. Natural colors are usually used

Image
Image

Modern styles can also include clapboard decor elements. The lining in this example plays the role of the perfect backdrop for bright accessories

Image
Image

The following example looks like a good design option - the lining is in perfect harmony with decorative stone and exquisite ceramics

Image
Image

For even more useful information on the dimensions of the lining, see below.

Recommended: