Installation Of Lamps In PVC Panels: Technology For Mounting Spotlights

Table of contents:

Installation Of Lamps In PVC Panels: Technology For Mounting Spotlights
Installation Of Lamps In PVC Panels: Technology For Mounting Spotlights

Video: Installation Of Lamps In PVC Panels: Technology For Mounting Spotlights

Отличия серверных жестких дисков от десктопных
Video: Track Lighting Installation from Lithonia Lighting 2023, February
Anonim

Regardless of what purpose the room will have, its interior is formed by various building materials. One of the main aspects of a room's decoration is lighting. If we talk about the installation of lighting devices in a material such as a PVC panel, then this task is very difficult. To complete it, you need certain knowledge that will help not only place the lamp correctly, but also connect it to the network.

Image
Image
Image
Image
Image
Image

Features of the

Nowadays, the popularity of multi-level ceilings, organized using PVC panels or drywall, is gradually receding. At the moment, a more modern design option for ceilings is a stretch material. However, compared to this popular finish, PVC panels are popular due to their beautiful appearance and reasonable cost. The main advantage of this material can be called the fact that any lamps can be built into it.

Image
Image
Image
Image
Image
Image

Polyvinyl chloride, or as it is called plastic, does not need special skills to carry out installation work. If a person has all the necessary tools and knows how to confidently use them, then the installation can be carried out independently, and the plastic ceiling will turn out no worse than that of specialists.

Due to the fact that there is a large assortment of beautiful panels on sale, the consumer has the opportunity to choose exactly the option that will best harmonize with the interior created in the room.

Image
Image
Image
Image
Image
Image

The following types of panels can be purchased today:

  • for the ceiling;
  • for walls;
  • glossy;
  • with texture.
Image
Image
Image
Image
Image
Image

Use of luminaires

Despite the fact that the choice of panels is quite large, and they have a lot of advantages, they also have disadvantages, the main one being that they depend on temperature. If the temperature is too high, the appearance and quality of the material will begin to deteriorate. For this reason, when choosing luminaires for panel mounting, you need to be very careful and responsible. Due to the fact that the temperature can negatively affect the design, the luminaires should not have a power of more than 40 watts. Experts do not recommend the use of incandescent lamps and gas discharge tubes.

For this type of finish, special lamps with protective metal rings are produced., which partially reduce the effect of the temperature factor on the ceiling. The ring can be purchased separately, it can be combined with almost any other light source, they are suitable even for spotlights.

Image
Image
Image
Image
Image
Image

It is equally important to pay attention to the enclosure sealing. This is especially important for rooms with a high humidity index. The ideal option in this case can be an LED luminaire that operates at the expense of a constant low voltage. They can be used in the bathroom, washroom and kitchen. When purchasing a different type of lamp, you need to pay attention to the mark, which means the degree of protection against moisture and dust. For example, IP44: in this case, the first number here means the reliability of protection against moisture, the second - against dust, the higher the number, the better.

Despite the fact that today there is a wide variety of light sources on sale, their installation on this type of ceiling, as well as the connection, is almost always identical.

Image
Image
Image
Image
Image
Image

Training

Before starting the installation process, you need to prepare.

First, prepare the tools that you will need in your work:

  • construction pencil;
  • drill;
  • crown;
  • knife (preferably clerical);
  • grout paper;
  • free space for drilling, one chair will be enough.
Image
Image
Image
Image
Image
Image
Image
Image

If we consider from the side of the structure, then the PVC ceiling is panels that are placed in parallel and connected using special grooves. It is very important here to make sure that the distance between the base of the ceiling and the material makes it possible to subsequently make safe wiring. All calculations should be carried out at the first stages of work.

In order for the fixing of the luminaire in the panel to be strong and reliable, you will need to drill a hole. But before that, create a project that will help you calculate the required number of lighting fixtures and their placement. Pick the spots and sketch out with a pencil. After that, the partial covering of the ceiling with the material begins, the installation of the stand and the organization of the holes. They should be done with a special crown, which is designed to work with plastic and drywall materials. Now you can cut a hole, all the resulting irregularities must be removed.

Image
Image
Image
Image
Image
Image

Thanks to this scheme of work, you can place a chandelier or an ordinary lamp in the ceiling. But pay attention to the fact that not every material can withstand the working pressure, so the process of organizing the hole must be carried out very carefully.

Installation

In order to connect ceiling lights, you will need a wire with a size of 3x1.5 sq. mm. In the event that the wiring will be done in a room with humidity, the wire must first be protected with a corrugated tube and connected to the switchboard, which will be located behind the room.

Any work should only be carried out with the electricity disconnected. Despite the fact that lamps of this type have a low power, this cannot guarantee your safety.

Image
Image
Image
Image
Image
Image

In addition, at the design stage, it should also be taken into account that the distance from the wall to the light source should be more than 0.6 m. When you draw up a project, think about all the nuances, how the wires will be located, switches, of course, lamps. This will simplify self-assembly. And also pay attention to the fact that each light source must be connected with a separate wire.

For information on how to make a hole for a spotlight in a plastic lining, see the next video.

Popular by topic