Condensation On The Toilet Cistern: How To Get Rid Of It And Why Does It Sweat? What To Do If A Lot Of It Forms On The Cistern?

Table of contents:

Condensation On The Toilet Cistern: How To Get Rid Of It And Why Does It Sweat? What To Do If A Lot Of It Forms On The Cistern?
Condensation On The Toilet Cistern: How To Get Rid Of It And Why Does It Sweat? What To Do If A Lot Of It Forms On The Cistern?

Video: Condensation On The Toilet Cistern: How To Get Rid Of It And Why Does It Sweat? What To Do If A Lot Of It Forms On The Cistern?

Video: Condensation On The Toilet Cistern: How To Get Rid Of It And Why Does It Sweat? What To Do If A Lot Of It Forms On The Cistern?
Video: Condensation on toilet cisterns and cold water pipes 2024, March
Anonim

The appearance of condensation on the toilet bowl is a nuisance that can happen to every owner of living quarters … Moreover, this does not depend on which toilet model is installed - an outdated Soviet one or the most modern. This phenomenon can cause many problems, ranging from humidity in the bathroom to the appearance of pathogenic microorganisms.

It is necessary to dwell in more detail on the reasons why the toilet cistern sweats, and how to fix the situation

Image
Image
Image
Image

Reasons for the appearance

The formation of wet condensation on the toilet bowl drain can put the owner of a private house or apartment in a difficult position. Drops of water constantly flowing from the toilet become a serious problem - they cause increased humidity in the room. If the accumulated moisture is not removed in a timely manner, it will eventually lead to the formation of colonies of fungi and established unpleasant odors.… Of course, moisture drops can be easily removed with a dry cloth from the surface of the tank, but this should be done often, and this may not be possible.

It is best to try to completely solve the problem - first to understand for what reasons the tank is sweating and condensate accumulates on it, and then start fixing them.

Image
Image

Let's list the factors due to which the cistern condenses heavily

  1. An increased level of humidity in an apartment or house. As practice shows, in most cases, the toilet tank fogs up precisely because of the high humidity. This is especially common in dwellings with many indoor plants that require large amounts of water for irrigation.
  2. The problem of condensation on the cistern exists in combined bathrooms (bathroom and toilet in the same room). The bathroom is always characterized by high air humidity (washing, bathing, drying). It turns out almost continuous humidification of the air with hot water vapor when filling a bath, washing, taking a shower, washing. Especially in large families.
  3. Condensation can be caused by frequent drying in the apartment. This often happens in the winter, when it is ineffective to dry the laundry outside or on unheated balconies and loggias. Such a problem is also relevant in combined bathrooms, which have standard clothes dryers.
  4. Poor ventilation of the bathroom or its complete absence leads to fogging of the tank.
  5. Often the source of problems is the continuous flow of chilled water into the tank due to malfunctioning valves. As a result, the water in the tank does not have time to reach room temperature. The contact of warm air masses with high humidity with the ice surface of the toilet bowl will certainly lead to condensation.
Image
Image
Image
Image
Image
Image
Image
Image

Effects

Many homeowners and apartment owners are struggling with condensation. If, when the toilet cistern is fogged up, no emergency measures are taken to fix the breakdown, then a foul-smelling puddle will always be observed near the toilet. In the future, she will become a source of rather serious trouble.

  • Mold growth … The fungus is extremely dangerous to health - it causes allergic diseases, pathologies of the respiratory system and aggravates the manifestation of asthma. Drops of water collecting in the cistern cause the accelerated spread of mold, since the aquatic environment is the ideal substrate for it. And this is not to mention the fact that mold spoils the appearance of the bathroom - the joints between the tiles, as well as the floor and ceiling, are covered with a fluffy black coating.
  • Bad smell. Condensation creates a musty odor. This is unpleasant in itself, and if you hang washed things in a combined bathroom, they will not only dry for a very long time in a humid environment, but also acquire a specific amber from mold.
  • The appearance of corrosion … Due to the constant leakage of moisture through the drain tank, rust appears, which destroys the pipes, fistulas can form in them. Replacing the tank and sewer system is expensive. And this is far from every our compatriot can afford, performing such work annually.
Image
Image
Image
Image
Image
Image

What to do?

The solution to the problem depends on the available causes. It turned out, the main reasons can be water leaks due to a malfunction of the fittings in the tank and high humidity in the bathroom.

Valve repair

If condensation is detected due to continuous leaks of cold water through the tank to drain, first of all, it is necessary to check the functionality of the valves … The fact is that most often condensation on the tank occurs precisely because of their breakdown.

But first you have to figure out exactly how this mechanism works. To do this, remove the lid and see how it is drawn into the tank, and then the water is drained. As soon as the container is completely filled, the collection of water stops, since the design prevents it from overflowing. If the float valve is inoperative, this protection will not work. The result is that the water goes through the overflow line to the toilet bowl.

To change the float valve, you should purchase a device that is completely similar to the one that has worn out. After that, the cold water supply is turned off and all the liquid is drained from the container.

Image
Image
Image
Image

Next, from the hose of the flexible line, you need to unscrew the nut holding the float valve, replace the broken part, and then repeat all actions in the reverse order.

If you follow these instructions, replacing the float valve will not be a hassle.

The source of the trouble may be related with a malfunction of the drain valve. Here, too, everything is simple: first, you should shut off the flow of liquid, then inspect the entire structure, remove the drain tank and disconnect the hose for supplying water. After that, the drain valve is separated directly. The place where it was located must be degreased, cleaned with a glass cleaner or a special cleaner. Next, a working drain valve is installed on the tank and everything is returned to its place.

Image
Image
Image
Image

Minimizing water

If you are having problems with constant fogging of the pipes and the toilet cistern, try adjust the volume of incoming water - it is possible that this is the reason for the malfunction. You just need to minimize the amount of liquid that goes into the sewer when draining. It is best to replace the tank itself - these days, special resource-saving models are produced that are only half filled.

Thanks to this design, the liquid warms up rather quickly, and condensation does not form. In addition, you can save well on water consumption.

Image
Image

Raising the temperature

If the cause of condensation is too cold water, which does not have time to warm up to room temperature, then you need to take measures to heat it. There are several methods for solving this problem.

  • Installation of a water heater … In this case, the device is located inside the tank. In this case, the water heater will heat the liquid to the desired adjustable level, which will prevent the appearance of condensation.
  • Insulation of water pipes … Make it the best at the stage of their installation. As a result, the water entering the cistern will not initially be too cold. Partial blocking of the pipe can also help - in this way you can regulate temperature fluctuations. This method is relevant for private houses.
  • You can consider installing thermal insulation for the tank. For this, both special devices and any available means are suitable. To do the necessary work, you need to wipe the tank dry and cover it with heat-insulating material. Most often, neoprene or expanded polystyrene sheets are used as insulation. However, keep in mind that this method may not always be guaranteed to keep the tank from fogging.
Image
Image
Image
Image
Image
Image

Some manufacturers offer double-walled cistern models: they have a plastic container inside that does not come into contact with ceramics.

If your toilet is not provided for such a structure, then you can put the plastic insert yourself.

Image
Image

Forced ventilation

If the temperature of the incoming water is at the optimal level, there are no leaks, the pipes are insulated, and the humid air remains at a high level, this means that there are problems associated with ventilation.

In this case, the ventilation system should be inspected and tested as a toilet facility. and dwellings in general. Typically, toilets, bathrooms and kitchens have small holes in the walls, called "ventilation windows". They are designed for efficient circulation of fresh air. Some owners of residential premises during repairs close such windows with finishing materials, brick them or walled them up, which is a big mistake.

Image
Image
Image
Image

The easiest way to solve the problem is to install fans. They are inserted into special circulation holes. To do this, you need to remove the mesh from the hole and mount the device in it. As a rule, such fans have a round frame shape and are powered by an electrical network. Keep in mind that you should not connect them to light switches, since in our case it is important that the fan runs continuously throughout the day.

Installing a new ventilation system will be a fairly effective method.… To do this, you will have to purchase air ducts, assemble them and place them where necessary, based on preliminary technical calculations.

Forced ventilation can be closed with suspended structures - in this case, the overall appearance of the bathroom will not deteriorate.

Image
Image
Image
Image

Such ventilation allows you to immediately solve a lot of problems associated with humidity in the bathroom and the formation of condensation. In addition, laundry in such rooms will dry much faster.

In conclusion, we note that condensation is always bad, wherever it appears. Therefore, you need to deal with it immediately and radically, otherwise, sooner or later you will have to look for ways to remove mold, which is much more difficult to do than to replace the tank or insulate the pipes.

Image
Image
Image
Image

Video on how to remove condensation from the toilet cistern.

Recommended: